1) Remove the platter from its protective wrapping and place on the spindle of the main unit. 2) Loop the belt over the motor pulley. Be sure it does not twist. 3) Remove the slipmat from its protective wrapping and place on the platter. 4) Place the counter-weight on the back of the tonearm assembly. 5) If desired place the 45rpm adaptor in its allocated holder on the main unit. - Do not place the unit in a location where it will be exposed to direct sunlight or near a heating appliance. - Do n

5 3 . . . 5 IMPORTANT SAFETY PRECAUTIONS 1. Read Instructions – All the safety and operating instructions should be read before this product is operated. 2. Retain Instructions – The safety and operating instructions should be retained for future reference. 3. Heed Warnings – All warnings on the appliance and in the operating instructions should be adhered to. 4. Follow Instructions – All operating and use instructions should be followed. 5. Water and Moisture – The appliance should not be used

Up to 32 steps can be stored in this sequence. The recorded sequence can start playing by pressing the PLAY button. Or it can start automatically after you stop recording by turning on the AUTOSTART mode. To turn AUTOSTART on or off: press and hold the MODE button in the SAMPLER SEQUENCER section and turn the left FX TIME encoder. The display will change between ASTRT ON and ASTRT OFF. 35. REVERSE BUTTON – When engaged (illuminated) playback will occur in the opposite direction (backwards). This

2. Once casing has been removed wipe down the rails with a cotton swab to remove excess dirt. 3. Lubricant can be applied to the rails. Thinner liquid-like lubricant is suggested but if you desire a slower or more resistant focus fader you may use grease like lubricant. (10) Cue Level – Controls the headphone output (23) level. (11) Rumble Filter – Rumble is a term used to describe mechanical vibrations traveling through the turntable into the stylus and being amplified as low frequencies. The r

(TERMINATED UNUSED INPUTS) MIC EQ HI ±10 +/- 2dB AT 10KHz LOW ±10 +/- 2dB AT 100Hz CHANNEL EQ HI 9 +/- 2dB AT 13KHz -15 +/- 3dB AT 13KHz MID 9 +/- 2dB AT 1KHz LESS THAN -23dB AT 1KHz LOW 9 +/- 2dB AT 70Hz -26 +/- 3dB AT 70Hz POWER SOURCE AC 9V,1000mA DIMENSIONS 230 (W) X 267 (D) X 111 (H) mm WEIGHT 1.65Kgs CONNECTIONS 1) Connect the power cord to an AC outlet. 2) Connect the RCA cable to the PHONO input of your mixer. You can also use a line input by setting the phono/line switch at the rear of

. . 5 1. Channel Gain - Adjusts the pre-fader volume for cleaner sound. Reduce the channel gain if you notice the level indicators flashing red. 2. Mic Input Gain - Adjusts microphone input level. 3. Mic EQ - The mic channel includes a two-band EQ with a range of +10 dB to -10 dB. 4. Channel EQ - Adjusts the high, mid and low frequency levels of the input channels for either making the treble or bass louder or to be used as an effect. 5. Input Fader - Controls individual source levels (channels)

The appliance has been exposed to rain; or D. The appliance does not appear to operate normally or exhibits a marked change in performance; or E. The appliance has been dropped, or the enclosure damaged. CAUTION: To reduce the risk of electric shock, do not remove any cover. No user-serviceable parts inside. Refer servicing to qualified service personnel only. The lightning flash with arrowhead symbol within the equilateral triangle is intended to alert the user to the presence of un-insulated “

Read these Instructions 2. Keep these Instructions 3. Heed all Warnings 4. Follow all Instructions 5. Do not use this apparatus near water 6. Clean only with dry cloth 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, hear registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polariz

This innovative family of mixers has been developed with input from the professional DJ community, bringing a previously unavailable, combination of user- friendly, functional design, rugged construction, and professional quality features together at an afforfable price. Stanton and your authorized Stanton dealer are dedicated to your complete satisfaction by offering benchmark service and support throughout the long life of your Stanton product. We appreciate your patronage, and look forward to

• You can connect the REC output directly to the input of a CD or cassette recorder or to a mixing board to record your set. GETTING STARTED GETTING STARTED • Once your system is set up, make sure the MASTER (28) is turned all the way down. • Turn on the mixer and check your levels. Start with the channel faders (16) down, GAIN (11) and EQs (12) at 12 o’clock. Start the music. Adjust the GAIN until the LED indicator is blinking. You can also use the main LED meter to view the input level of each