This innovative family of mixers has been developed with input from the professional DJ community, bringing a previously unavailable, combination of user- friendly, functional design, rugged construction, and professional quality features together at an afforfable price. Stanton and your authorized Stanton dealer are dedicated to your complete satisfaction by offering benchmark service and support throughout the long life of your Stanton product. We appreciate your patronage, and look forward to

Check all input and output connections for s e c u re fit. Isolate and re p l a c e the damaged cable. Pro g ram volume canOt be adjusted with master vo l u m e c o n t ro l . No powe r. Amplifier or outboard gear connected to the re c o rd output. I m p roperly connected AC cord or power line source not on. B l own fuse. Connect amplifier or outboard gear to master output. Properly connect AC cord to AC power source. Turn powe r o n . Re m ove the fuse cover with a flat-bladed scre wd r i ve r.

x 8.66 in. x 4.72 in. (48 cm. x 22 cm. x 12 cm.) 4.5 kg (9.9 lbs) Congratulations on your choice of the Stanton RM-22 Professional DJ Mixer. You now own one of the most flexible DJ mixers ever designed. The rackmountable RM-22 offers up to three Microphone inputs, three Phono inputs and nine Line inputs—making it one of the most powerful DJ mixers around. And with Stanton’s smooth fader movement and rock-solid reliability, it’s the perfect mixer for mobile and club DJs alike. Please take a momen

Connect the power cord to the auxiliary power outlet on the rear panel of your amplifier or receiver or to a household AC outlet. 2. Connect the unit output terminals to the PHONO jack of your amplifier or receiver. Output terminals Amplifier (Receiver) L White) L Channel R (Red) R Channel GND (Spade) GND NOTE: Be sure to connect the ground terminal firmly to the amplifier or receiver. If this connection is not made or is loose, a power source "HUM" will result. The major cause of problems in so

Crossfader Reverse -The crossfader reverse changes the direction of the fade on the crossfader (23). FRONT PANEL FRONT PANEL 25. Crossfader Curve -Controls the taper (fade) shape of the crossfader (23). The crossfader curve control continually adjusts the curve from a sharp cut to a long fade. 26. Headphone Outputs -1/4” and 1/8” connector jacks for headphones. BACK PANEL BACK PANEL Power -Power switch to turn the mixer “ON” or “OFF”. AC IN: This is the input connection for the included power su

7. Booth level control: Controls the signal level of the booth output. 8. Headphone level control: Controls the overall headphone output level. It is recommended headphones with an impedance rating of 200 ohms or less be used for maximum volume. 9. Headphone output: Connection for 1/4 inch headphone. Recommended headphone impedance is 32-200 ohms for maximum volume. 10. Cue pan: Fades the headphone output between the channel(s) selected by the cue assign switches (15) and the master one output,

UNIT OVERVIEW......................................................................................................................13 DECK A (LEFT SIDE) ...............................................................................................................13 DECK B (RIGHT SIDE) .............................................................................................................13 DECK CONTROLS .......................................................................................

1) Remove the platter from its protective wrapping and place on the spindle of the main unit. 2) Loop the belt over the motor pulley. Be sure it does not twist. 3) Remove the slipmat from its protective wrapping and place on the platter. 4) Place the counter-weight on the back of the tonearm assembly. 5) If desired place the 45rpm adaptor in its allocated holder on the main unit. - Do not place the unit in a location where it will be exposed to direct sunlight or near a heating appliance. - Do n

Up to 32 steps can be stored in this sequence. The recorded sequence can start playing by pressing the PLAY button. Or it can start automatically after you stop recording by turning on the AUTOSTART mode. To turn AUTOSTART on or off: press and hold the MODE button in the SAMPLER SEQUENCER section and turn the left FX TIME encoder. The display will change between ASTRT ON and ASTRT OFF. 35. REVERSE BUTTON – When engaged (illuminated) playback will occur in the opposite direction (backwards). This

Check all input and tion. Shorted cable. output connections for s e c u re fit. Isolate and re p l a c e the damaged cable. Pro g ram volume canOt be Amplifier or outboard gear Connect amplifier or outboard adjusted with master vo l u m e connected to the re c o rd out-gear to master output. c o n t ro l . put. No powe r. I m p roperly connected AC cord Properly connect AC cord to or power line source not on AC power source. Turn powe r o n . The amplifier is turned up, Faulty output connections