Оценок - 2, средний балл: 4
(
)
)
|
Фрагмент инструкции
Up to 32 steps can be stored in this sequence. The recorded sequence can start playing by pressing the PLAY button. Or it can start automatically after you stop recording by turning on the AUTOSTART mode. To turn AUTOSTART on or off: press and hold the MODE button in the SAMPLER SEQUENCER section and turn the left FX TIME encoder. The display will change between ASTRT ON and ASTRT OFF. 35. REVERSE BUTTON – When engaged (illuminated) playback will occur in the opposite direction (backwards). This function works for normal playback, sample playback and loop playback. 8 CONTROL OVERVIEW C.324 CONTROL OVERVIEW C.324 414038 393736 LCD DISPLAY C.324 46 42 47 43 44 45 48 49 50 51 52 54 55 56 57 53 58 59 60 61 62 63 42. TRACK – Indicates the current track selected or being played. 43. CD/MP3 – Indicates whether the current disc is a standard audio disc or an MP3 disc. 44. PITCH VALUE – Shows the percentage of the pitch slider. 45. LOCK – Shows when Pitch Lock and/or Key Lock are active. 46. SINGLE – Controlled by the CTN/SGL button, this indicates when the unit is set to play just one track at a time. When this is not illuminated, the CD will play continuously through all tracks. 47. A.BPM – Indicates when Auto BPM is active. To activate, press and hold the TAP button. 48. A.CUE – Indicates when Auto Cue is active. To activate Auto Cue, press and hold the SGL/CTN button. 49. LOOP – Indicates when the CD is in loop mode. 36. AUDIO OUT – This analog output signal requires a pair of RCA cables (left and right) to be connected to a line level input. 37. DIGITAL OUT – This digital output signal requires one S/PDIF (75Ohm, coaxial) cable to be connected to a S/PDIF input on your mixer or computer. 38. FADER START/ RELAY – This connection allows two CD players to be linked for relay play. This can also be connected to a mixing board that supports automatic fader start. 39. VENT SLITS – These openings are used for the proper ventilation of the unit. In order to prevent overheating and to ensure proper operation, do not cover or block these slits. 40. POWER BUTTON – Turns the unit on and off. 41. AC IN – Plug in the power supply cable here. The plug can only be inserted in one direction, so do not force it. 50. RELOOP – Indicates when there is a previously set loop, and that the loop is ready to be played again. 51. EFFECT – Indicates when an effect is active. 52. PLAY – Indicates when the unit is currently playing a CD. 53. HAND – Indicates when the touch sensitive surface of the jog wheel is active. 54. PAUSE – Indicates the unit is in CUE or PAUSE mode. 55. CUE – Indicates the unit is at a cue point and is ready to play. 56. WHEEL INDICATOR – This is a visual representation of a vinyl marker, which is traditionally used to mark the location of a certain sound or cue point on a vinyl record. Here, it indicates the play position, rotates during playback in either direction, and stops during cue or pause mode. It also indicates the speed of the forward and reverse search operation. 57. ANTI SHOCK AND BUFFER INDICATOR – Indicates the current status of the buffer memory. This is represented on the display by a bucket being filled or emptied. The bucket itself represents the instant start function (which works by buffer memory). If the bucket is flashing, the instant start is not available. Each bar within the bucket represents 2 seconds of anti shock protection. There is up to 10 seconds of anti shock protection available. It is recommended to let the bucket fill up before using the jog wheel in vinyl mode. 58. X/Y/BPM – Indicates whether PARAMETER (#59) is displaying the BPM or effect parameters. 59. PARAMETER – Shows the current BPM count, or tempo of the music. Also shows the effects TIME and RATIO parameters while they are being adjusted. 60. TIME BAR – Shows a proportionate visual representation of the time remaining or time elapsed. 61. TIME DISPLAY – Displays the time of track(s) currently selected in increments of Minutes, Seconds, and Frames. 62. TEXT – The text portion of the display (the bottom row) is mainly used to display MP3 file names or CD text information. It is also used to display various messages, such as effects parameter settings and so on. See operating instructions for further explanation. 63. ELAPSED / TOTAL/ REMAIN – Indicates whether the time shown on the display refers to total remaining time or track remaining time. If either of these are not illuminated, this indicates elapsed track time. 9 SETUP C.324 SETUP C.324 CHECKING THE CONTENTS Check that the carton contains all of the following items. ..• Tabletop CD player unit ..• Printed user’s manual ..• One RCA cable ..• One power cable ..• One fader start / relay cable INSTALLING THE UNIT ..• Place the unit on a flat, level surface. ..• Be sure the player is in a well-ventilated area where it will not be exposed to direct sunlight, high temperatures, or high humidity ..• Try to place the unit as far as possible from TVs and tuners, as the unit may...