Turn on the video source you’ve connected, then set OHMS 75/1K on the RF Modulator to the position that results in the best TV picture. The video signal indicator light will be on when the RF Modulator is receiving a signal from an A/V source. To return to normal television viewing, turn the power off on the video component that is connected to the RF Modulator._ RF MODULATOR Audio/Video Signal Converter SPECIFICATIONS RF Output Level_________________________ 66 ± 3.5dB ^V RF Output Channel

Make sure antenna connections are tight! RF Module Back of RF Module © Disconnect power to the unit! ® Unlock and open the unit. (3Place RF module in J400 Plug - Device 1 or J407 Plug - Device 3. (4 screws per board, screws are critical for proper operation). @ Cable MUST go through the conduit hole. © Test the module by pressing the appropriate transmitter button once so that the new module is automatically detected. EL25 J407 Position Device 3 EL25 Optional Passport Remotes

91000051, Revision B This manual is published by DYNEX Technologies, Inc. Questions or comments regarding the content of this manual can be directed to the address below or to your DYNEX Technologies representative. DYNEX Technologies 14340 Sullyfield Circle Chantilly, VA 20151-1683 USA Tel. (703) 631-7800 (800) 288-2354 Fax. (703) 803-1441 OPSYS MWTM is a trademark of DYNEX Technologies, Inc. © 2006 This document is the copyright of DYNEX Technologies and must not be copied or reproduced in any

. . . . . . . . . . . . . . . . . . . . . . . . . 1 Unpackingthemonitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Connectingthemonitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Attachingthebase . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Connectingvideoand audioinputs . . . . . . . . . . . . . . . . . . . . . .

6№#iœiï№. ffl^ipmaSlMouse Suite »g«#) »»H Wte • ffl*t«XÈ*±-^Rrffl«IUSBSP. Windows ssMiai*. Wheel Molette Rueda Function buttons Touches de fonction Botones de función 3)№ü Function Description Left button For left clicking Right button For right clicking Wheel For scrolling Leftside button For going back to a previously viewed item in programs that support the"Back" command, such as Web browsers Right side button For going to the next item in programs that support the “Forward" comma

2 DNS Server Test. If this test fails, there may be an issue with your Internet service provider. • Make sure your router is connected to your cable or DSL modem correctly. • Contact your Internet service provider for more help. 3 Internet Connection Test. If this test fails, there may be an issue with your Internet service provider. • Make sure your router is connected to your cable or DSL modem correctly. • Contact your Internet service provider for more help. Using connected applications You

Connecting to your home network This player can be connected to your wired network using the Ethernet port on the back of your player or using a wireless network. Using a wired network provides the best performance, because the attached devices connect directly to the network and are not subject to radio frequency interference. There are three types of wireless network connections: • User selects a network form a list of available networks • User uses WIFI protected Setup Connecting to the Inter

The DX-TVM113 TV mount is designed to support a TV weighing up to 100 lbs. (45 kg). Package contents A Wall plate (1) B Left TV bracket (1) C Right TV bracket (1) M4 Bag D M4 . 12 mm screws (4) E M4 . 30 mm screws (4) F M4 spacers (4) G M4 washers (8) M6 Bag H M6 . 12 mm screws (4) I M6 . 20 mm screws (4) J M6 . 35 mm screws (4) M8 Bag K M8 . 16 mm screws (4) L M8 . 40 mm screws (4) M M6/M8 spacers (4) N M6/M8 washers (4) Lag Bolt Bag O Wall anchors (3) P 5/16 in. (7.9 mm) washers (3) Q 5/16 in.

12 mm screws (4) I M6 . 20 mm screws (4) J M6 . 35 mm screws (4) K M6 spacers (4) L M6 washers (4) Lag bolt bag M Wall anchors (3) N 5/16 in. (7.9 mm) washers (3) O 5/16 in. . 2 . in. lag bolts (3) 1 Attach the TV brackets Option 1: Attaching to a TV with a flat back surface Attach the left and right TV brackets (B and C) to the back of the TV using: The M4 washers (G) and the M4 screws (D). Or The M6 washers (L) and the M6 screws (H or I). Tools you will need: • Power drill • 3/16 in. wood dril

(13.6 kg). Package contents A Wall plate (1) B TV bracket (1) C Locking bar (1) M4 Bag D M4 . 12 mm screws (4) E M4 . 30 mm screws (4) F M4 spacers (4) G M4 washers (4) Lag Bolt Bag H Concrete wall anchors (2) I 1/4 in. . 2. in. lag bolts (2) 1 Attach the TV bracket NOTE: Make sure there will be enough space between the back of the TV and the wall to connect all your cables. You can use the optional M4 spacers to provide additional space. Without spacers: Attach the TV bracket (B) to the back of