Thermostat This fireplace insert can be operated manually or with a thermostat. Lighting This fireplace insert is equipped with an electric self ignitor for ease of ignition. Fuel Specifications This insert is designed to burn wood pellet fuel. In addition, a corn/wood pellet mixture, with a maximum of 50 percent corn can be burned. Burning any other fuel that is not approved for use with this appliance will void the appliance warranty. IMPORTANT: The corn/wood mix needs to be mixed evenly befor

N, 04/2010 MODELS VF5000-CMN-2 VF6000-CMN-2 VF5000-CMP-2 VF6000-CMP-2 USPortland Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. WHAT TO DO IF YOU SMELL GAS • Donottrytolightanyappliance. • Donottouchanyelectricalswitch;donotuseany phone in your building. • Immediatelycallyourgassupplierfromaneighbor’sphone.Followthegassupplier'sinstructions. • Ifyoucannotreachyourgassupplier,callthe fire department. Installation and service must

The components of this kit are rated for both natural and propane gas. This kit is designed to be used as an aid in installing the appliance. WARNING: CHILDREN AND ADULTS SHOULD BE ALERTED TO THE HAZARDS OF HIGH SURFACE TEMPERATURES. USE CAUTION AROUND THE APPLIANCE TO AVOID BURNS OR CLOTHING IGNITION. YOUNG CHILDREN SHOULD BE SUPERVISED WHEN THEY ARE IN THE SAME ROOM AS THE APPLIANCE. Wall Thermostat Kit A wall thermostat kit is available for use with these appliances. The wall thermostat is de

This kit can be retrofitted to previously installed appliances and may be temporarily installed in place of other switch circuitry. Decorative Volcanic Stone The decorative volcanic stone, Model FDVS, can be used to enhance the look of your appliance. Spread the decorative volcanic stone evenly around the bottom of the firebox. Refractory Liner Kit One of the most beautiful enhancements you can make to this appliance is the addition of refractory liners. The refractory liner kit includes tan cer

The pilot can be relit only Fireplace surround materials 5 5 Clearances ....................................... page llation .................................. page Preinstawhen fresh air is available. Refer to the Combustion and Ventilation Air section. Installation Applications stible) 5 6 Installation – Built-In ....................... page Dimensions........................ page FramingThe VF5000 and VF6000 Series Unvented Room Heaters may be built into a framed wall, or 1. Fireplace built i

Hold in theknob. TO TURN OFF GAS TO HEATER1.Depress and turn control knob clockwise to the “OFF” position (Figure 22). 3.Light the match and hold the flame to the end of the pilot andignite the pilot. 4.Continue to hold control knob for an additional 10 seconds toinsure pilot remains lit. 5.Release the control while turning control knob to desiredsetting. 8.With the control knob pressed in, push in and release thepiezo igniter button to light the pilot. 9.Hold the control knob in for a further 1

If this happens, it is preferable to contact your nearest dealer to get the appliance serviced. REPLACEMENT PARTS An exploded view of the room heater with numbered parts and a parts list can be found on pages 20 and 21. All parts should be ordered through your Lennox distributor or dealer. Parts will be shipped at prevailing prices at time of order. When ordering repair parts, always give the following information: 1. The model number of the heater. 2. The serial number of the heater. 3. The par

page 3 These heaters are fitted with a specially de- Installation Applications signed pilot (ODS) which responds to the Location of Fireplace ....................... page 4 amount of oxygen available in the room and 1. Fireplace built into a framed wall. Clearances ....................................... page 5 shuts the heater off before the oxygen level Preinstallation .................................. page 5 drops below 18%. The pilot can be relit only 2. Fireplace installed with oak surroun

This kit can be retrofitted to previously installed appliances and may be temporarily installed in place of other switch circuitry. Wall Thermostat Kit A wall thermostat kit is available for use with the millivolt controlled appliances. The wall thermostat is designed to be wired directly to the appliance millivolt gas control circuit and provide automatic On/Off control of the appliance to maintain a desired temperature within the room. OPERATION AND CARE OF YOUR APPLIANCE 1. Blower operation m

Refer to National Fuel Gas Code, ANSI Z223.1 1992, Section 5.3. b. Vent room directly to the outdoors. Refer to National Fuel Gas Code, ANSI Z223.1 1992, Section 5.3. c. Install a lower BTU/Hr heater, such as a 21,000 BTU/Hr, to make the area an unconfined space. If the actual BTU/Hr used is less than the maximum BTU/Hr the space can support, then the space is an unconfined space. You will need no additional fresh air ventilation for an unconfi ned space. COLD CLIMATE INSULATION For cold climate