19 Using a foot controller (VOX VC-12SV) .................................................... 20 Expression pedal setting ....................................................................................................... 20 Assigning a function to the expression pedal (Quick Assign) ............................................... 21 If you don’t want any function to be assigned to the expression pedal ................................ 22 Minimum and maximum values for the expression pedal ..

Beachten Sie, da. keinerlei Fremdkorper in das Gerat gelangen. Hinweis zur Entsorgung (Nur EU) Wenn Sie das Symbol mit der „durchgekreuzten Mulltonne“ auf Ihrem Produkt, der dazugehorigen Bedienungsanleitung, der Batterie oder der Verpackung sehen, mussen Sie das Produkt in der vorgeschriebenen Art und Weise entsorgen um Schaden an der menschlichen Gesundheit und der Umwelt zu vermeiden. Batterien oder Akkus, die Schadstoffe enthalten, sind auch mit dem Symbol einer durchgekreuzten Mulltonne gek

30 Watts RMS into 8/16 Ohms 3 x ECC83/12AX7, 4 x EL84, 1 x GZ34 (rectifier) 2 x 12" 8 Ohm Celestion Alnico Blue NORMAL INPUT Jack (HIGH and LOW), TOP BOOST INPUT Jack (HIGH and LOW), FOOT SWITCH Jack 2 x POWER OUTPUT Jacks Power cable, Owner’s manual, VFS1 footswitch, Dust cover 705 x 260 x 550 mm / 27.76 x 10.24 x 21.65 inches 30.8 kg / 67.9lbs. 30 Watts RMS into 8/16 Ohms 3 x ECC83/12AX7, 4 x EL84, 1 x GZ34 (rectifier) 2 x 12" 8 Ohm Celestion G12M Green Back NORMAL INPUT Jack (HIGH and LOW), T

– Connecting an optional VFS2 dual foot switch enables you to turn Bypass and All Mute on and off with your foot. Setting Up Your Amplifier This section explains how to set up your amplifier. NOTE:This manual includes safety precautions and an explanation of the parts and functions of the amplifier. Please read this manual throughly. 1. Before turning the amplifire on set the [MASTER] volume control on the AGA70/150 to minimum. 2. Connect the supplied power cord to the AC power connector on the

13. [REVERB] control This control enables you to adjust the reverb effect. Turn the knob clockwise for more reverb. 14. [CHORUS] switch This switch turns the chorus effect on and off. When the switch is turned on, the indicator above the switch lights up. 15. [MASTER] volume control This control enables you to adjust the overall volume level of the Normal and Tube Pre channels. NOTE:The [MASTER] volume control does not affect the signal level at the [DI OUT], [TUNER OUT], [AUX IN] or [LINE IN] c

•Keep these instructions. • Heed all warnings. •Follow all instructions. • Do not use this apparatus near water. • Mains powered apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. • Clean only with dry cloth. • Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. • Do not install near any heat sources such as radiators, heat registers, stoves, or other appa

If you want to disconnect the internal speakers simply unplug the jack. Be sure to set the IMPEDANCE SELECT switch accordingly. (See “IMPEDANCE SELECT Switch”) WARNING! To ensure that your system works correctly, you must observe the following points. a) Don’t use an extension cabinet whose impedance is anything other than 16 ohms. b) Don’t connect a speaker whose rated input capacity is less than 30 watts (for AC30HW) or 15 watts (AC15HW). The speaker may be destroyed if you ignore this caution

10 Deutsch........................................................................... 16 Espanol........................................................................... 22 2 IMPORTANT SAFETY INSTRUCTIONS • Read these instructions. • Keep these instructions. • Heed all warnings. • Follow all instructions. • Do not use this apparatus near water. • Mains powered apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the

TOP BOOST Channel 4. INPUT Jack Sockets Guitar input jacks for the TOP BOOST channel. The ‘HIGH’ input will give you more gain and output volume whereas the ‘LOW’ input will be quieter and have more clean headroom. 5. VOLUME Control This controls the TOP BOOST channel pre-amp volume. It can be used in conjunction with the MASTER VOLUME to create the perfect balance between pre/power amp distortion and overall output level. Turn clockwise for more gain. 6. TREBLE Control This controls the high fr

Aside from the extra features in the individual channels, we have also added a TONE CUT and a fully bypassable MASTER VOLUME meaning that if you need to play at lower volumes you can, but for unaffected tonal clarity, it can be removed completely, giving the bedroom guitarist and the tonal purist the best of both worlds. Finally, the output power can be cut in half using the OP MODE switch. In full power, you have all the classic VOX sound you’d expect. In half power, the high end is mellowed sl