We know you will enjoy working with CHIMERA quality lighting on all your projects. IMPORTANT: Please read the enclosed “Lightbank Care and Use Instructions” card for information on set up and take down of your Lightbank kit. A seperate instruction sheet covers your new TrioletiM light. #8000 - 500 WATT LIGHTBANK KIT: 1 -#8124 24x32” Video Pro Plus One Lightbank 1-#3520 40 Degree Soft Fabric Egg Crate Grid 1-#9930 Triolet (#9930E for 220 v) 1-#80008005 Mathews Light Stand 1 -#3960 44” x 9”x

Repeat with each corner, sliding body further up pole each time until all poles slide into position (photo 3). Align poles with seams in body. Bank will now appear as shown in photo 4. 4. While pushing downward on Ring, bring internal cables up from inside body and place hooked ends in grooves in pole ferrules on opposite corners of Ring (photos 5 & 6) 5. Assembled Bank should appear as shown in photo 7. 1812 Valtec Lane, Boulder, CO 80301 303-444-8000 888-444-1812 fax 303-444-8303 salesinfo@

Refer to the light manufacturer’s recommendations before operating your particular light in this position. 2. Do not leave the Lantern unattended when the light is on. 3. Use the light’s protective screen or shield at all times. 4. Use in a moderate temperature environment with good ventilation and spacing between multiple units. 5. Open the Lantern’s flaps for additional ventilation as required. 6. Maximum power capacity for these products is 500 watts in the 1880, 20” Lantern model, and 1

5. Adjust the Skirt as desired by unzipping the corner zippers from bottom to top and rolling up the sides (photo 10). Photo 8 Photo 9 Photo 10 1812 Valtec Lane, Boulder, CO 80301 303-444-8000 888-444-1812 fax 303-444-8303 sales@chimeralighting.com 2 18609800/030101 SMALL PANCAKE LANTERN ASSEMBLY INSTRUCTIONS Item numbers 1860 and 1864 REMOVING THE BODY FROM THE FRAME 1. Allow the light to cool. 2. Remove the Skirt from the Lantern. 3. Remove the Lantern from the light fixture. 4. Unzip the zipp

1. This product is intended for use with bare bulb instruments pointed straight down. Refer to the light manufacturer’s recommendations before operating the light in this position. 2. Do not leave unattended. 3. Use the light’s protective screen or shield at all times. 4. Use in a moderate temperature environment. 5. Open the Lantern’s flaps for ventilation as required. 6. Maximum power capacity for this product is 400 watts. ASSEMBLING THE FRAME The frame has three components. The first consist