Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing Mounting Audio and video signals are passed through without processing. Furniture mount................ Yes, furniture/wall mountable with standard electrical wall boxes EU models.................. Mountable into standard 40 mm or 50 mm deep European junction boxes MK models................. Mounts to a standard 47 mm deep MK electric type British standard

1.3" H x 1.9" W x 1.1" D (3.3 cm H x 4.8 cm W x 2.8 cm D) (Overall rear dimensions, including connectors. Allow at least 1.58" [4 cm] depth in the wall or furniture for device and cable clearance.) WPC 170 MK Faceplate..................... 3.4" H x 3.4" W x 0.1" D (8.5 cm H x 8.5 cm W x 0.3 cm D) (1-gang MK electric type British Standard wall box frame size) Device......................... 1.3" H x 1.9” W x 1.1" D (3.3 cm H x 4.8 cm W x 2.8 cm D) (Overall rear dimensions, including conn

200 MHz (max.) Pixel clock accuracy...................... 100 ppm Horizontal frequency range (factory defaults) 15 kHz to 131 kHz Vertical frequency range (factory defaults) 30 Hz to 120 Hz Rise/fall time NTSC, PAL......................... 140 ns All other signal rates......... <4 ns Video output Number/signal type..................... 1 RGBHV, RGBS, RGsB, RsGsBs, component video, HDSDI (SMPTE 292M), SDI digital component video (SMPTE 259M-C), S-video, composite video (NTSC/PAL) Conne

¦ High resolution video output signals: Computer, plasma, HDTV ¦ NTSC or PAL video output signals: Component, S-video, composite ¦ 34 scan rates ¦ Broadcast quality video encoder ¦ 13 video test patterns ¦ Six audio test signals ¦ Protective rubber boot ¦ Battery operated or DC powered ¦ Integrated battery charger (VTG 300R only) VTG 300 VIDEO TEST GENERATOR AUDIO SIGNAL TEST PATTERNS RANGE OUTPUT RATE MENU RATE NEXT POWER SELECT LEVEL FREQUENCY VIDEO P.NOISE W. NOISE SINE SQUARE POLARITY SWEEP

2- 5 Connecting Audio Outputs ................................................ 2- 5 Output 1 ................................................................................. 2- 5 Output 2 ................................................................................. 2- 6 Output 3 ................................................................................. 2- 6 Menus, Configuration, and Adjustments................... 2- 6 Moving through menus by using front panel controls ......... 2- 6

2 RCA female Impedance ............................................. 20k ohms unbalanced, DC coupled Nominal level ........................................ -10 dBV (316 mVrms) Maximum level....................................... +8 dBu (2.5 V), unbalanced at 1% THD+N NOTE: 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV . 2 dBu Audio output Number/signal type CVEQ 100, SVEQ 100.......................... 1 stereo, balanced/unbalanced All other models.................................. 1 stereo or dual m

For Y: 0.4 to 2.0 Vp-p with no offset at unity gain Impedance ......................................... 75 ohms Return loss ......................................... <-25 dB @ 0 to 5 MHz DC offset (max. allowable).................. 4.0 V Input coupling .................................... AC Video output Number/signal type CVEQ 100 D.................................... 1 composite video SVEQ 100 D..................................... 1 S-video Connectors CVEQ 100 D...............................

............... FCC Class A Notice This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The Class A limits are designed to provide reasonable protection against harmful interference when the equ