Part 432. 3 No LEDs are lit. No sound from one or both speakers. No sound from DVD/ CD-ROM drive. Crackling sound from speakers. The speaker system isn’t turned on. The speaker system is not connected to a power source. You are using the USB port on your laptop computer or PC to power your speaker system and your laptop computer or PC is in sleep mode. The retractable speaker-to-speaker cable is not properly connected. The volume is set too low. You are using an alternate audio source and the sp

Remove pivoting stand by sliding the stand toward the rear of the speaker. 2. Use the key hole on the back of the center speaker. Rear Satellite Speakers The rear satellite speakers should be placed slightly behind you, or as far back as the cords allow. Use the key hole on the back of each speaker if you choose to mount them on the wall. For optimum sound, all satellites should be placed at or slightly above ear level, and in an arrangement that offers the most satisfying results. Note: The sat

Bass Press the bass button on the hardwired controller or wireless remote. A blue EQ LED will illuminate next to the bass button. When using the hardwired controller, turn the master volume knob clockwise to increase the bass and counter-clockwise to decrease the bass. When using the remote, press and hold the “+” button to increase the bass or press and hold the “–” button to decrease the bass. An LED will light up and move on the wired controller to indicate changing bass levels. The LED will

Set-Up Diagram Center Speaker + – Receiver FRONT SPEAKERS SURROUND SPEAKERS L R C L R Left Surround Speaker Right Surround Speaker + – + – REARCENTER Left Front Speaker + – Right Front Speaker + – 1. Connect the left front speaker terminals (+ & -) of your receiver to the left LS 300 front speaker. 2. Connect the right front speaker terminals (+ & -) of your receiver to the right LS 300 front speaker. 3. Connect the left surround speaker terminals (+ & -) of your receiver to the left LS 300 rear

– L RC Center Rear Surround Center Speaker Receiver Left Surround Speaker Right Surround Speaker Right Front Speaker Left Front Speaker + –+ –+ + –+ + –+ + –+ – L R Front Speakers + Fuse 5A 250V Power In 18.5 VAC Level Power Line InOn Off + – L R + L R L R – SW 80 Powered Subwoofer Speaker Out Speaker In Made in China Hi Level In These inputs are designed to accept an amplified signal from the speaker outputs of a receiver, power amp or other device not equipped with line level outputs. Hi Level

All rights reserved. AMX and the AMX logo are registered trademarks of AMX. AMX reserves the right to alter specifications without notice at any time. 3000 RESEARCH DRIVE, RICHARDSON, TX 75082 • 800.222.0193 • fax 469.624.7153 • technical support 800.932.6993 • 93-1130-02

See provided Limited Warranty card for additional terms and conditions. INCIDENTAL OR CONSEQUENTIAL DAMAGE: In no event E.T.I. Sound Systems, Inc. be liable for any incidental or consequential damages arising out of the use or inability to use of any B-52 product, even if, E.T.I. Sound Systems, Inc. or a B-52 dealer has been advised of the possibility of such damages, or any other claim by any other party. Some States do not allow the exclusion or limitation of consequential damages, so the abov

To rotate the image by 90°, 180°, 270°, 0°, press ROTATE button. You can save the image up to 8 frames into your digital presenter's memory. After saving, you will be able to recall it. To save the image into the memory, press SAVE button and specify the memory location within 4 seconds using the number keys from 1 through 8. If you want to recall the saved image from memory, press RECALL button and press the memory location number within 4 seconds. If you press and hold down RECALL button, all

SDP-950 Special features Thank you for purchasing this product. This product is a high resolution digital presenter that can project all kinds of data on a PC monitor, a TV or a large screen with simple operations. By adopting 12X super optic angle zoom lens, it is possible to shoot all materials from the size of a 35mm film to A4 size. By adopting 1/3 inch PS type CCD, the high resolution and the excellent color reproduction are realized. Especially by using USB, it is possible to view or store