Press the MENU button .† To V-CHIP v® To operate (lock icon appears) Press ZERO to access the V-Chip menu v® To turn V-Chip ON or OFF .† To move to SET US TV RATINGS v® To operate Directions to set US V-Chip Ratings Line up the cursor in the column (TV PG, TV G, etc.) with the content row (V/FV, S, etc.) and press the.or † to move the cursor to the correct location. Press v or ® to turn the locking feature on or off. An item is locked if the icon appears instead of a “—”. For example. To block v

. . . . . . . . . . . – – – – – – – make sure that the aerial cable is connected to the unit properly and press ENTER on the remote control. The unit will try Auto Set Up again. NOTES: . If there is a power cut, or if you press 1or SET UP while Auto Set Up is in progress, Auto Set Up will be interrupted; be sure to turn off the unit power once and try again from step A. . If no sound accompanies the picture or the audio sounds unnatural on some channels that have been stored by Auto Set Up, the

[FILM]: For a film source disc. [VIDEO(NORMAL)]: For a video source disc with relatively a few movements. [VIDEO(ACTIVE)]: For a video source disc with relatively a lot of movements. SCREEN SAVER You can set the screen saver function to ON or OFF. CONNECTIONS You need to select the video signal type when you connect the player to a TV with a SCART connector. [VIDEO COMPONENT]: A TV accommodates component signals. [SCART S-VIDEO]: A TV accommodates S-video (Y/C) signals. [SCART RGB]: A TV accommo

English 16 EnglishEnglish Continued Recording the External Equipment When recording from the external equipment, you can select one of the two recording methods — Manual Recording and Sound Synchronized Recording. • Manual Recording — Sound is recorded in stereo (both on the left and right audio channels). You have to operate the MD recorder and the external equipment respectively. • Sound Synchronized Recording — With this method, you can start recording when the sound signals come into the MD

A Connect the aerial, recorder and TV as shown in the illustration. B Connect an optional 21-pin SCART cable between the EURO AV1 AUDIO/VIDEO connector on the rear of the recorder and the TV’s 21-pin SCART connector. —5— D Perform Plug&Play setup Initial Settings The TV should be set to its AV mode (with AV connection . 5) or UHF channel 36 (with RF connection . 5). Plug the mains power cord into a mains outlet. Turn on the recorder. The Country Set screen appears. Press weto select your country

When this option is selected, playing back a DTS-encoded disc or disc recorded by the MPEG Multichannel format outputs a linear PCM digital signal. [STREAM/PCM]: select when you connect the digital input of an amplifier with a built-in DTS, MPEG Multichannel or Dolby Digital decoder, or the stand-alone unit of such a decoder. NOTE When [STREAM/PCM] is selected, note the following points: -With some DVD VIDEO discs that are not fully copy-protected, a 20 or 24 bit digital signal may be output. -A

13 Various kinds of playback SUB TITLE AUDIO ANGLE SLIDE EFFECT 5/./2/3 ENTER 3 (SELECT) ON SCREEN Repeat playback To repeat the current selection or all tracks For DVD VIDEO: During playback For SVCD/Video CD/Audio CD: In any condition except SVCD/ Video CD playback with PBC 1Press ON SCREEN twice. The menu bar appears on the TV screen. 2Press 2/3 to move to , then press ENTER. The pull-down menu for repeat mode selection appears. 3Press 5/. to select the desired repeat mode, then press ENTER.

NOTES: . If you have programmed the recorder to timer-record 2 or more programmes, the second programme and those thereafter may not fit on the tape if you set “AUTO SP]LP TIMER” to “ON”. In this case, make sure the mode is not engaged, then set the tape speed manually during timer programming. . In order to ensure that the recording fits on the tape, this feature may leave a slight non-recorded section at the end of the tape. . There may be some noise and sound disturbance at the point on the t

15 BUTTON FUNCTIONS Display ................................................................. 16 Closed Caption .................................................... 16 Video Status ......................................................... 16 Sleep Timer .......................................................... 16 Hyper Surround ................................................... 16 Number Buttons (10 Key Pad) ............................ 17 100+ .................................................

Be careful not to trap your hands when putting the TV down. 1 2 3 ENGLISH Thank you for buying this JVC colour television. To make sure you understand how to use your new TV, please read this manual thoroughly before you begin. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: • Operate only from the power source specified (AC 220 – 240 V, 50 Hz) on the unit. • Avoid damaging the AC plug and power cord. • When you are not using this unit for a l