Оценок - 1, средний балл: 3
(
)
)
|
Фрагмент инструкции
When this option is selected, playing back a DTS-encoded disc or disc recorded by the MPEG Multichannel format outputs a linear PCM digital signal. [STREAM/PCM]: select when you connect the digital input of an amplifier with a built-in DTS, MPEG Multichannel or Dolby Digital decoder, or the stand-alone unit of such a decoder. NOTE When [STREAM/PCM] is selected, note the following points: -With some DVD VIDEO discs that are not fully copy-protected, a 20 or 24 bit digital signal may be output. -A signal recorded with the 96 kHz or higher sampling frequency is output from the DIGITAL OUT jack with the 48 kHz sampling frequency. -When playing a DVD VIDEO or Audio CD disc with DTS, use a DTS decoder to get correct signals from your speakers. ANALOG DOWN MIX To correctly play the audio on a DVD VIDEO disc recorded with surround multichannel audio, you must set this item properly according to your audio system configuration. (This function does not work when 3D PHONIC function is activated.) Setting options DOLBY SURROUND, STEREO [DOLBY SURROUND]: select when listening to multichannel surround audio with the player’s analog AUDIO OUT terminals connected to a surround decoder. [STEREO]: select when listening to conventional two-channel stereo audio with the player’s AUDIO OUT terminals connected to a stereo amplifier/receiver or television set, or in case you want to record the audio from a DVD VIDEO disc to MiniDisc, cassette, etc. D. RANGE CONTROL This setting provides optimal audio quality from the analog AUDIO OUT terminals for listening to DVD VIDEO discs recorded in Dolby Digital format, at low or middle volume. Setting options WIDE RANGE, NORMAL, TV MODE [WIDE RANGE]: when selected, audio is played back with the widest dynamic range so that you can enjoy powerful playback sound. [NORMAL]: normally, select this option. [TV MODE]: select if DVD VIDEO disc sound level is lower than TV program sound level. Thus you can hear sound at a lower volume clearly. OUTPUT LEVEL This setting allows you to attenuate the level of the signal output from the player’s analog AUDIO OUT jacks. Setting options STANDARD, LOW • If the sound output from the speaker is distorted, select [LOW]. OTHERS menu RESUME You can select the resume playback mode. See page 12 for details about the resume playback function. Setting options ON, OFF, DISC RESUME [ON]: when selected, the player can resume playback of the disc from the position where playback was last interrupted, if the disc is still in the disc tray. [OFF]: when selected, the resume function is deactivated. [DISC RESUME]: when selected, the player can resume playback of the last 30 discs played. The player retains a memory of the interrupted positions of the last 30 discs played, even though they have been removed from the disc tray. ON SCREEN GUIDE The player can display “on-screen guide” icons or characters on the picture, which show what is happening to the disc or the player. Example of “on-screen guide” icons: , , Setting options ON, OFF [ON]: when selected, the on-screen guide is activated. AUTO STANDBY When the player is stopped for more than 30 minutes or 60 minutes, the player enters standby mode automatically. Setting options 60, 30, OFF AV COMPULINK MODE This item is provided for use in the future. Leave it as the default setting (“DVD 1”). To change the setting, see “How to set preferences” on page 26. 28 PARENTAL LOCK 4Press 5/. to select the country code. Select the code of the country whose standards were used to When this option is selected, pressing ENTER on the remote rate the DVD VIDEO disc content. control unit brings up the PARENTAL LOCK display shown below. See “Appendix A: Country/Area code list for Parental Lock” This allows you to restrict children from playing DVD VIDEO on page 33. discs. . SET LEVEL NONE PASSWORD _ _ _ _ PARENTAL LOCK EXIT COUNTRY CODE GB . COUNTRY CODE GB SET LEVEL NONE PASSWORD _ _ _ _ PARENTAL LOCK EXIT FX GA GB GD GE GF GH • See this page for details about the parental lock setting. 5Press ENTER. moves to [SET LEVEL]. 6Press ENTER to bring up the pull-down Numeric buttons menu. In the pull-down menu, [NONE] and levels [8] to [1] are available. [NONE] does not restrict playback. Level [1] is the strictest level. Discs rated higher than the selected level are restricted. 5/. ENTER . COUNTRY CODE GB SET LEVEL NONE PASSWORD _ _ _ _ PARENTAL LOCK EXIT NONE 8 7 6 5 4 3 Limiting playback by children This function restricts playback of DVD VIDEO discs which contain violent (and other) scenes according to the level set by the user. For example, if a movie which includes violent scenes supports the parental lock feature, such scenes which you do not want to let children view can be cut or replaced with other scenes. To set Parental Lock for the first time 1In stop mode, bring up the OTHERS menu. 2Press 5/. to move to select [PARENTAL LOCK] then press ENTER. The Parental Lock on-screen display appears on the TV screen. 7Press 5/. to select a de...
Эта инструкция также подходит к моделям:DVD-проигрыватели - GNT0044-004A (1.96 mb)