Войти:
Оценок - 2, средний балл: 4.5 ( )

Инструкция по эксплуатации JVC, модель 0105KTH-MW-BJ

Производитель: JVC
Размер: 3.72 mb
Название файла: 1d89aa01-87b6-4397-8173-f71022934d5f.pdf
Язык инструкции:en
Перейти к скачиванию



Фрагмент инструкции


. . . . . . . . . . . – – – – – – – make sure that the aerial cable is connected to the unit properly and press ENTER on the remote control. The unit will try Auto Set Up again. NOTES: . If there is a power cut, or if you press 1or SET UP while Auto Set Up is in progress, Auto Set Up will be interrupted; be sure to turn off the unit power once and try again from step A. . If no sound accompanies the picture or the audio sounds unnatural on some channels that have been stored by Auto Set Up, the TV system setting for those channels may be incorrect. Select the appropriate TV system for those channels. “TV System Selection — When you see the picture but the audio can’t be heard or sounds unnatural” . pg. 63). ATTENTION If you perform Auto Set Up successfully during installation, there’s no need to separately perform the Clock Set or Channel Set procedures, but if adjustments become necessary, they can be performed as follows: . Tuner setting . pg. 60 . Clock setting . pg. 19 EN 15 Monitor Set (DVD deck) You can select the monitor type depending on the TV used when you play back DVD VIDEO discs recorded for wide-screen TVs. For the multi colour system TV When you use a multi colour system TV, you can change the colour system of this unit automatically by selecting “MULTI” options as the monitor type. In this case, the setting of this unit is changed to match the colour system of the loaded disc regardless the TV system setting. ( “ATTENTION” below) ATTENTION How to change the TV system between PAL and NTSC A Press and hold SCAN MODE on the unit for more than 3 seconds while the unit is turned off. The current TV system blinks on the front display panel. B While the current TV system blinks, press weto select “ntSc” (for NTSC) or “PAL” (for PAL), then press ENTER. • If the current TV system stops blinking before you make the setting, start from step A again. . Turn on the TV and select the video channel (or AV mode). . Slide the TV/VCR/DVD switch on the remote control to the right. Slide to the right. A A Turn on the unit. Press 1. B B Select the DVD deck. On the unit Press VCR/DVD repeatedly so that the DVD indicator lights up. On the remote control Press DVD so that the DVD indicator lights up. C C Access the DVD Set Up menu screen. A Press SET UP. B Press we to select “ PICTURE.” 4:3LB PICTURE MONITOR TYPE PICTURE SOURCE SCREEN SAVER AUTO ON MP3 / JPEG MP3 D D Select the mode. Press rt to move H to “MONITOR TYPE,” then press ENTER. E E Select the mode setting. Press rt to select the desired setting, then press ENTER. F F Return to the normal screen. Press SET UP. * The default setting is bold in the table below. 8 MONITOR TYPE 16:9 NORMAL / 16:9 MULTI NORMAL (Wide television conversion): Select this when the aspect ratio of your TV is fixed to 16:9 (wide TV). The unit automatically adjusts the screen width of the output signal correctly when playing back a picture whose aspect ratio is 4:3. 16:9 AUTO / 16:9 MULTI AUTO (Wide television conversion): Select this when the aspect ratio of your TV is 16:9 (wide TV). 4:3 LB / 4:3 MULTI LB (Letter Box conversion): Select this when the aspect ratio of your TV is 4:3 (conventional TV). While viewing a wide screen picture, the black bars appear on the top and the bottom of the screen. 4:3 PS / 4:3 MULTI PS (Pan&Scan): Select this when the aspect ratio of your TV is 4:3 (conventional TV). While viewing a wide screen picture, the black bars do not appear; however, the left and right edges of the pictures will not be shown on the screen. Pan&Scan/Letter Box In general, DVD VIDEO disc are produced for a wide-screen TV with 16:9 aspect ratio. Material with this ratio will not fit to a TV with 4:3 aspect ratio. There are two styles to display the image, “Pan&Scan” and “Letter Box.” Pan&Scan The right and left side of the image are cut off. The image fills the screen. Letter Box Black bands appear at the top and bottom of the image. The image itself appears in 16:9 aspect ratio. NOTES: . Even if ”4:3 PS” or ”4:3 MULTI PS” is selected, the screen size may become ”4:3 LB” or ”4:3 MULTI LB” with some DVD VIDEO. This depends on how they are recorded. . When you select ”16:9 NORMAL”or ”16:9 MULTI NORMAL” for a picture whose aspect ratio is 4:3, the picture slightly changes due to the process for converting the picture width. 16 EN INITIAL SETTINGS (cont.) Language . Turn on the TV and select the video channel (or AV mode). . Slide the TV/VCR/DVD switch on the remote control to the right. Slide to the right. On-screen Language Set (VHS deck) A A Turn on the unit. Press 1. B B Select the VHS deck. On the unit Press VCR/DVD repeatedly so that the VCR indicator lights up. On the remote control Press VCR so that the VCR indicator lights up. C C Access the Main Menu screen. A Press SET UP. B Press rtto move the highlight bar (pointer) to “INITIAL SET,” then press ENTER or e. D D Select your country. Press rt to move the highlight bar (pointer) to “LANGUAGE,” then press ENTER or e. E E S...


Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории