Always unplug this appliance immediately after using. 2. Do not use while bathing. 3. Do not place or store appliance where it can fall or be pulled into a tub or sink. 4. Do not place in or drop into water or other liquid. 5. Do not reach for an appliance that has fallen into water. Unplug immediately. WARNING– To reduce the risk of burns, electrocution, fire, or injury to persons: 1. Read all instructions before using the appliance. 2. To protect against electrical hazards, do not use while ba

To reduce the risk of death or injury by electric shock: 1. Always “unplug it” immediately after using. 2. Do not use while bathing. 3. Do not place or store appliance where it can fall or be pulled into a tub or sink. 4. Do not place in, or drop into, water or other liquid. 5. If an appliance falls into water, “unplug it” immediately. Do not reach into the water. WARNING – To reduce the risk of burns, electrocution, fire, or to persons: 1. This appliance should never when plugged twist, or wrap

10. Do not use an extension cord to operate dryer. 11. Do not direct hot air toward eyes or other heat-sensitive areas. 12. Attachments may be hot during use. Allow them to cool before handling. 13. Do not place appliance on any surface while it is operating. 14. While using the appliance, keep your hair out of it. Keep your hair away from the air inlets. 15. Do not use with voltage converter. SAVE THESE INSTRUCTIONS OPERATING INSTRUCTIONS This appliance is intended for household use only. Use o

If you do have a problem, please complete the following checklist before calling Conair: . Make sure you have all model, serial and parts list numbers for your particular equipment. Service personnel will need this information to assist you. . Make sure power is supplied to the equipment. . Make sure that all connectors and wires within and between control systems and related components have been installed correctly. . Check the troubleshooting guide of this manual for a solution. . Thoroughly e

3 Bolt the dryer to the stand using the four 5/16”-18 bolts provided. Tools for installation: . 3/8” and 9/16” wrench . Hoist Mounting the Dryer and Hopper on a Mobile Floor Stand CAUTION: To prevent accident and injury, lift the empty hopper and the dryer onto the mobile floor stand using a hoist and the lifting lugs provided. Tools for installation: . 5/32” Allen wrench . 3/8” and 9/16” wrench . Phillips screwdriver . Flathead screwdriver . Hoist and strap 1 Lift the hopper onto the mobile flo

The purpose of this test is to allow you to make sure the water sensing system (ALCI) is working. 1. Plug in the appliance and press test button on plug (See appropriate diagram below). 2. The appliance will stop working. There will be an audible click and reset button will pop out. 3. To reset ALCI with a reset button, unit should be unplugged. Then push reset button in, and reinsert plug into outlet. Test Reset Test Reset 4. If ALCI is not functioning properly, return appliance to nearest serv

To obtain service under this warranty, return the defective product to the service center listed below, together with your sales slip and $ 5.00 for postage and handling. California residents need only provide proof of purchase and should call 1- 800- 3- CONAIR for shipping instructions. In the absence of a receipt, the warranty period shall be 24 months from the date of manufacture. ANY IMPLIED WARRANTIES, OBLIGATIONS, OR LIABILITIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTY OF MERCHAN

(3.8 7.6 liters/min.) tower, city, or chiller water at temperatures of 40° to 85°F (4° to 29°C). Pipe should be run to the planned dryer location. Use flexible hose to connect the water pipes to the aftercooler and precooler. If the dryer has an optional flow control, see Appendix D for connection information. . .. Minimum clearance for safe operation and maintenance. You should maintain 24 in. (61 cm) clearance on at least three sides of the dryer. If the dryer is mounted with a hopper on a pro

This guarantee does not cover any faults or defects caused by accidents,misuse, fair wear and tear, neglect, faults on the telephone line, lightning, tampering with the equipment, or any attempt at adjustment or repair other than through approved agents. Please keep your sales (till) receipt this is your guarantee. You should also keep the original packaging material. In the unlikely event that you need to return your phone system to our Repair Centre while it is under guarantee, there may b

Shampoo and condition hair with products To create extra properly, if it has been dropped, dam-2. The appliance will stop working. There will be of your choice. Rinse thoroughly. Towel volume, turn headINSTRUCTIONS aged, or dropped into water. Return the INSTRUCTIONS blot hair to remove excess moisture. upside down while 4. Never operate this appliance if it has a 1. Plug in the appliance and press test button DRYING BASICS BODY & VOLUME an audible click and reset button will pop out. When using