Control Flame- Reset Out Button Control Reset Button Flame-Out Figure 6 - Flame-Out Control Reset Figure 7 - Flame-Out Control Reset Button, 70,000 BTU/Hr Model Button, 100/150,000 BTU/Hr Models Continued 7 OPERATION Continued STORAGE PREVENTATIVE MAINTENANCE SCHEDULE To Stop Heater 1. Unplug power cord from outlet. To Restart Heater 1. Wait 2 minutes after stopping heater. 2. Repeat steps under To Start Heater, page 7. 1. Drain fuel tank. Note: Some models have drain plug on underside of fuel t

102D (For Home Use Only) Listed _ „ (£)„.. Air Compressor SPECIFICATION CHART Model No. 102D Horsepower 3/4 SCFM @ 40 psig 2.9 SCFM @ 90 psig 2.1 Displacement CFM 4.0 Bore 1 3/4" Stroke 1 1/4" Voltage-Single Phase 110-120 Minimum Branch Circuit Requirement 15 AMPS *Fuse Type Quick Acting Amperage at Max. Pressure 10 Tank Size 2 Gallon *A circuit breaker is preferred. Use only a fuse or circuit breaker that is the same rating as the branch circuit the air compressor is operated

Binding pump rotor If fan is hard to turn, see Pump Rotor, page 14. 9 SERVICE PROCEDURES Upper Shell Removal 1. Remove screws along each side of heater using 5/16" nut-driver. These screws attach upper and lower shells together. 2. Lift upper shell off. 3. Remove fan guard. Fuel Filter (70,000 BTU/Hr Model) 1. Remove side cover screws using 5/16" nut-driver. 2. Remove side cover. 3. Pull rubber fuel line off fuel filter neck. 4. Carefully pry bushing and fuel filter out of fuel tank. 5. Wash fue

Order parts separately. 21 WHEELS AND HANDLES FOR 100,000 AND 150,000 BTU/Hr MODELS KEY NO. PART NUMBER PART DESCRIPTION 100,000 QTY. 150,000 QTY. 1 2 3 4 5 6 7 HA2203 HA2204 M12345-33 M12342-3 M12831-3 NTC-3C 097896-01 M28526 M51015-01 M16801-2 Handles Handles Screw, #10-24 x 1 3/4" Wheel Support Frame Wheel Support Frame Hex Nut, #10-24 Wheel Cap Nut Axle Axle 2 — 8 1 — 8 2 2 1 — — 2 8 — 1 8 2 2 — 1 4 7 1 2 3 5 6 22 WIRING DIAGRAMS ACCESSORIES Purchase accessories from your local dealer. Power

Periodic checks and adjustment of the opener are required to ensure safe operation. The model number label is located on the operator cover. As of date of manufacture, meets all ANSI/UL 325 Safety Standards and requirements for residential and commercial applications. ® TM H I G H L O W N OR M A L H I G H L O W N ORMA L UP FORCE DOWN FORCE Includes Lift-Master "Protector System" CONTENTS PAGE CONTENTS PAGE A review of safety alert symbols ..............................2 Safety reversing sensor i

Improper use of heater can cause serious injury. Keep this manual for future reference. CONTENTS SECTION PAGE Safety Information ......................................................................... 3 Product Identification .................................................................... 4 Unpacking...................................................................................... 5 Assembly ....................................................................................... 5 Theo

When ordering parts, be sure to PARTS LIST provide the correct model and serial numbers (from the model plate), then the part number and description of the desired part. 70,000 BTU/HR KEY NO. PART NUMBER PART DESCRIPTION QTY. KEY NO. PART NUMBER PART DESCRIPTION QTY. 1 2 3 4 5 6 7 8 9 1010-1 10-2 10-3 10-4 10-5 10-6 10-7 11 12 13 14 15 16 17 1818-1 18-2 18-3 18-4 18-5 18-6 18-7 18-8 18-9 M51104-01 098511-54 102432-01 098512-44 M11084-29 M16660 M10908-2 HA3019 079673-06 ** HA3008 M10659-1 M10809-

Models -Modeles -Modellen - Modelle: B35CEH, B70CEH, B100CEH, B150CEH 105398 R R PORTABLE FORCED AIR HEATERS OWNER’S MANUAL Heater Sizes: 35,000 70,000 100,000 150,000 Btu/Hr Models: B35CEH, B70CEH, B100CEH, and B150CEH IMPORTANT: Read and understand this manual before assembling, start- ing or servicing heater. Improper use of heater can cause serious injury. Keep this manual for future reference. R R PORTABLE FORCED AIR HEATERS SAFETY INFORMATION WARNINGS IMPORTANT: Read this owner’s manual ca

Unplug power cord from outlet. To Restart Heater 1. Wait 2 minutes after stopping heater. 2. Repeat steps under To Start Heater, page 7. 1. Drain fuel tank. Note:Some models have drain plug on underside of fuel tank. If so, remove drain plug to drain all fuel. If heater does not have drain plug, drain fuel through fuel cap opening. Be sure all fuel is removed. 2. Replace drain plug if used. 3. Add one gallon (4 liters) of clean kerosene or paraffin to fuel tank. 4. Attach fuel cap. 5. Move heate

19 20 104468 PORTABLE FORCED AIR HEATERS R ILLUSTRATED PARTS BREAKDOWN 150,000 BTU/HR Burner Head Assembly 8-1 8-2 8-4 8-3 8-5 8-7 8-6 13-1 13-2 13-3 13-4 13-5 13-6 13-7 13-8 13-13 13-15 13-16 13-17 13-18 13-14 Motor and Pump Assembly 13-11 13-10 13-9 13-12 1 2 3 4 5 7 8 9 10 11 12 13 14 15 17 25 20 26 9 30 31 33 34 35 36 37 38 39 40 41 6 42 43 21 22 23 24 45 44 27 28 16 19 18 46 29 32 OWNER’S MANUAL This list contains replaceable parts used in your heater. When ordering parts, be sure to PARTS