34,534; 7,270,087 B2. OTHER U.S. AND FOREIGN PATENT APPLICATIONS PENDING. CURRENT CANADIAN PATENTS: 1,272,914; 1,280,043; 1,289,832; 2,045,862; 2,112,515; 2,108,186; 2,107,012; 2,092,105; 2,409,271. Defender Safety System®, Vitraglas® and Hydrojet® are registered trademarks of Bradford White® Corporation. 103-B-0508-A Residential Direct Vent Water Heater Direct Vent Energy Saver Models Meet or exceed ASHRAE 90.1b (current standard) C.E.C. Listed 80% Recovery Efficiency NATURAL GAS AND LIQUID PRO
All residential storage models meet or exceed efficiency requirements of the Department of Energy. ASHRAE Standard 90.1 b (current standard) and the National Appliance Energy Conservation Act of 1987 recent amendment effective January 20, 2004 which supercedes all state and local efficiency requirements. . 1" Non-CFC foam insulation—surrounds the tank surface, saving energy by retarding loss of heat. . Closed combustion—all air for combustion is taken directly from the outside. The co-axial vent
. Applications—Standing at a height of less than 34", Lowboy models are ideal for installations where space is at a premium and are perfect for tight installations such as a closet or under a counter. . Fully Automatic Controls—Fast acting surface-mount thermostats for automatic temperature control. Factory installed sensitive manual reset energy cut-off for safety to prevent overheating. . Direct Heat Transfer With Immersed Elements—Transfers heat directly and efficiently to the water. Screw-in
The Bradford White high silica Vitraglas® lining provides a tough interior surface for our hot water tanks. . 1" Non-CFC Foam Insulation—Surrounds the tank surface, saving energy by retarding loss of heat (30 gallon model has 2"). . Factory Installed Heavy Duty Wall Mounting Bracket—no additional brackets or modifications required. . Water Connections—3/4" NPT factory installed true dielectric fittings extend water heater life and eases installation. Located on the bottom for easier installation
INSTALLATION & OPERATINGINTERNET VERSION FOR REFERENCE ONLYINSTRUCTION MANUAL THE WARRANTY ON THIS WATER HEATER IS IN EFFECT ONLY WHEN THE WATER HEATER IS INSTALLED AND OPERATED IN ACCORDANCE WITH LOCAL CODES AND THESE INSTRUCTIONS. THE MANUFACTURER OF THIS HEATER WILL NOT BE LIABLE FOR ANY DAMAGE RESULTING FROM FAILURE TO COMPLY WITH THESE INSTRUCTIONS. READ THESE INSTRUCTIONS THOROUGHLY BEFORE STARTING. For safety, convenience, and best performance, we recommend this water heater be installed
MANUFACTURED HOME (MOBILE HOME) CLOSED COMBUSTION (DIRECT VENTING) INSTALLATION AND OPERATING INSTRUCTION MANUAL WARNING: If the information in these instructions is not followed exactly, a fire or explosion may result causing property damage, personal injury or death. FOR YOUR SAFETY Do not store or use gasoline or other flammable, combustible, or corrosive vapors and liquids in the vicinity of this or any other appliance. WHAT TO DO IF YOU SMELL GAS • Do not try to light any appliance. • Do no
Do not smoke or have open flame near the faucet at the time it is open. Gas Connections The gas supply lines must meet all requirements of the National Fuel Gas Code (ANSI Z223.1-Latest Edition), or in Canada CAN/ CGA B149.1 Natural Gas Installation Code (Latest Edition) or CAN/CGA B149.2 Propane Installation Code (Latest Edition). The minimum permissible gas supply pressure for the purpose of input adjustment is one (1.0) inch (0.25 kPa) water column above the operating manifold pressure. See t