The LCD Hood may become detached and you may damage the camera or injure yourself. • Do not allow magnetized objects to touch or come close to the LCD Hood. • When the LCD Hood is attached, the base of the hook may not touch the LCD screen frame. This is not a malfunction. • To open the LCD screen, press the OPEN button of the camera first. Hold the LCD screen to open it even when the LCD Hood is attached. If you hold the LCD Hood to try to open the LCD screen, the LCD Hood will become detached

6. Return halogen light glass cover to the housing. . 7. Turn range hood ON to test for operation. 10 SPECIFICATIONS MODEL / SIZE RA9430SQB / 30" RA9436SQB / 36" COLOR Commercial Grade Stainless Steel CONSUMPTION / RA9430SQB - 215W / 1.79A AMPERE RA9436SQB - 215W / 1.79A VOLTAGE 120V 60Hz NUMBER OF MOTORS 1 DESIGN 18-Gauge Seamless / Satin Finish FAN TYPE Double Horizontal Squirrel Cage EXHAUST Top 6" Round CONTROLS Electronic Control (4 Buttons) – 10-Second Standby Startup 30-Second Delay Shuto

• Press Speed Control A button to cycle from Low, Medium, High, or QuietMode™. Press Speed Control B button to cycle from Low, QuietMode™, High or Medium. (Note: Speed Control A or B will operate both fans.) • Press Light Control button to turn on halogen light. TURN OFF: • Press Power Control (On/Off) button once, panel lights will flash and power will be completely shut off after 30 seconds. OR • Press Power Control (On/Off) button twice, and all power will be completely shut off immediately.

FOR MORE INFORMATION, PLEASE VISIT OUR WEBSITE OR CONTACT KOBE RANGE HOODS AT (626) 775-8880. 3 INSTALLATION PLEASE READ ENTIRE INSTRUCTIONS BEFORE PROCEEDING Calculation before Installation To calculate installation, please refer to TABLE 1. (All calculation in inches.) TABLE 1 A = Height of Floor to Ceiling B = Height of Floor to Counter Top (Standard: 36”) C = Preferred Height of Counter Top to Hood Bottom (Recommended 27” to 30”) D = Height of Hood E = Height of the Hood Installation [A – (B

To Clean Oil Containers, Safety Screens and Impellers CAUTION: DRAIN OIL CONTAINER BEFORE OIL CAN OVERFLOW. 1) Normal Cleaning - Turn on high speed and spray a mild degreaser into the fan. Liquid residue will accumulate in the oil containers. 2) Cleaning Oil Containers -Remove the oil container (round) by turning counterclockwise for cleaning. -Remove the oil container (oval) by sliding forward for cleaning. -Wash with warm soapy water. Dry completely before returning into place. -Top rack dishw

3. Using references on Table 1 and measurement on page 16 center the hood in place beneath the cabinet and flush with the front of the cabinet. Refer to Figure 5. Figure 4 Figure 5 4. Draw electrical wires through cabinet access opening 5. Place screws (not provided) into the exact center of each hole. Make sure all screws are in place before tightening screws. CAUTION: MAKE SURE THE HOOD IS SECURE BEFORE RELEASING. Ductwork Installation 6. Use aluminum or steel pipe to connect the plastic exhau

• Use an extinguisher ONLY if: a) You have a Class A, B, C extinguisher and know how to operate it. b) The fire is small and contained in the area where it started. c) The fire department has been called. d) You can fight the fire with your back to an exit. What to Do If You Smell Gas - Extinguish any open flame. - Do not try to turn on the lights or any type of appliance. - Open all doors and windows to disperse the gas. If you still smell gas, call the Gas Company and Fire Department right awa

d) You can fight the fire with your back to an exit. What to Do If You Smell Gas . Extinguish any open flame. . Do not try to turn on the lights or any type of appliance. . Open all doors and windows to disperse the gas. If you still smell gas, call the Gas Company and Fire Department right away. CAUTION 1) For general ventilation use only. Do not use to exhaust hazardous or explosive materials and vapors. 2) To reduce the risk of fire, use only metal ductwork. 3) Follow the heating equipment ma

CH9130SQB CH9136SQB CH9142SQB CH9148SQB CH-191 SERIES – 9” HEIGHT INSTALLATION INSTRUCTIONS AND OPERATION MANUAL - READ AND SAVE THESE INSTRUCTIONS - CONTENTS Important Safety Instructions.................................................................................................1 Components of Package.......................................................................................................3 Installation...........................................................................

The control buttons are the light and speed controls (QuietMode™, Low and High). Refer to Figure 12. Figure 12 Light Control: Press button to turn on / off. Speed Control: Press button for speed. (QuietMode™, Low and High). Light Control Speed Control MAINTENANCE SAFETY WARNING NEVER PUT YOUR HAND INTO AREA HOUSING THE FAN WHILE THE FAN IS OPERATING. For optimal operation, clean range hood surface and stainless steel baffle filters regularly. Cleaning Hood Surface CAUTION: NEVER USE ABRASIVE CLE