DO NOT USE THIS PLUG WITH AN EXTENSION CORD. RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. -TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to

keit erst nach mehreren Lade- A Vor dem Einstellen oder Saubern ist der Motor- Ist der Accu vollig entladen, maher auszuschalten und z. B. durch lang andauernde gegen unbeabsichtigtes Ein- Lagerung ohne zwischenzeitschalten zu schutzen. Dazu ist liche Nachladung, dann ist der Schlusselschalter Q aus die volle Accu-Kapazitat erst der Kontaktbuchse des Motor- nach mehreren Lade- / Entlademahers zu ziehen. vorgangen wieder verfugbar. 7.2 Der Accu (Abb. E/ G) Laden des Accus temperatur oder Aufheizu

Electrical safety Check the power cord regularly for damage and signs of wear and tear. Do not use your Turbotrimmer if the power cord is damaged. v If the mains cord or extension cable is damaged while you are working, unplug the mains plug immediately. Do not touch the cable until the mains plug is switched off. The socket of the extension cable you are using must be waterproof. v Only use permitted extension cables. v Ask your electrician. For all portable units that are operated outdoors we

3. Drive machine on a flat, level surface to test and repeat steps 1 & 2 as necessary. A B Figure 29. Neutral & Tracking Adjustment Points A. Left-Hand Adjustment B. Right-Hand Adjustment If Machine Veers to the RIGHT: 1. Turn the RIGHT adjustment nut 1/8 - 1/4 turn COUNTER-CLOCKWISE. 2. Turn the LEFT adjustment nut 1/8 - 1/4 turn CLOCKWISE. 3. Drive machine on a flat, level surface to test and repeat steps 1 & 2 as necessary. 27 Troubleshooting, Adjustment & Service TRANSMISSION MAINTENANCE AND

within 20 days from the date of delivery. Ferris Industries, Inc. (Ferris) warrants, in accordance with the provisions below, to the original purchaser for the period of twenty-four (24) months from the date of delivery of a Ferris mower that the mower is free from defects in material or workmanship. Ferris’ obligation under this warranty is to repair or replace, at Ferris’ election, without charge and at the place of business of a dealer authorized to handle Ferris mowers, any part or parts of

No. 119) Footnotes The above parts group applies to the following Mfg. Nos.: HC36KAV13E 5900604 HC32KAV13 © Copyright 2005 Ferris Industries. All Rights Reserved. 25TP 400-7077-08-HC-F Tire & Wheel Group NOTE: Unless noted otherwise, 077WHL0 use the standard hardware torque specification chart. The above parts group applies to the following Mfg. Nos.: HC32KAV13 HC36KAV13E 5900604 © Copyright 2005 Ferris Industries. All Rights Reserved. 26TP 400-7077-08-HC-F Tire & Wheel Group REF NO. PART NO. QT

Date: 4/2005 HydroCut Series Walk-Behind Mower Manual 5022949 5375 North Main Street Munnsville, NY 13409 USA 800-933-6175 Ferris Industries TP 400-7077-08-HC-F Models: 5900604 HC32KAV13 HC36KAV13E 08Revision Table Of Contents s MODEL COMPONENTS PAGE Engine Frame & Handle Bars Group - Electric Start .......................................................................................................... 4 Engine Frame & Handle Bars Group - Manual Start ..........................................