Assembling your DCO7 Using your DCO7 4 6 Using the tools 8 Emptying the clear binTM 10 Cleaning the lifetime filter 12 Where to look for blockages 14 Warranty and customer care 16 Contents Dyson Helpline contact us on 1-866-693-9766 3 Assembling your DCO7 Assembling your DCO7 This machine was inspected and packaged carefully before being shipped from the factory. If you need assistance during assembly or operation, please call the Dyson Helpline on 1-866-693-9766. 1 Slide the hose into the guide

Leave it to cool for at least an hour and check for blockages before restarting. • Fine dirt such as flour or plaster dust should only be vacuumed in very small amounts. • Before vacuuming highly polished floors, such as wood or lino, first check that the underside of the floor tool and its bristles are free from foreign objects that could cause marking. • To avoid damaging the floor do not push hard with the floor tool. Do not leave the cleaner head in one place on delicate floors. • On waxed f

If you have a query about your Dyson vacuum cleaner, call the Dyson Customer Care Helpline quoting the serial number and details of where/when you bought the vacuum cleaner. The serial number can be found on the main body of the vacuum cleaner behind the clear bin. Most queries can be solved over the phone by one of our trained Dyson Customer Care Helpline staff. Visit our website to register your full parts and labour guarantee online (Australia only). Note your serial number for future referen

• Click the wand handle into the top of the vacuum. • Ensure the hose is straight. Slide the wand straight down into the hose. • Attach the tools to the vacuum and wind the cord counter-clockwise around cord hooks and secure with clip. USINg YOUR dYSON vACUUM Unwind the cord and insert the plug into a suitable socket. Hold the cleaner head down with your foot and pull the handle downwards. To switch ‘ON’ or ‘OFF’ press the power button in front of the handle. CAUTION: • Do not use or store this

(iii) The use of an extension cord is not recommended. (iv) Always switch off and unplug before performing maintenance on your appliance. (v) When returning to the upright position, ensure that the stabilizer wheels are fully engaged before releasing the cleaner. (vi) Ensure the cyclone is secured to the machine. Do not press the cyclone release button or shake the appliance while carrying or it could fall and cause injury. (vii) Store the machine indoors. Put the vacuum cleaner away after use w

This limitation is not allowed by some states and so this limitation may not apply to you. • Your remedy for breach of this warranty is limited to the warranty service described above. Dyson, Inc. will not be liable for any consequential damages or incidental damages you may incur in connection with your purchase and use of your vacuum cleaner. This limitation is not allowed by some states and so this limitation may not apply to you. • This limited warranty gives you specific legal rights. You m

Clear blockage before restarting. SAVE THESE INSTRUCTIONS THIS APPLIANCE IS INTENDED FOR HOUSEHOLD USE ONLY SAVE THESE INSTRUCTIONS THIS APPLIANCE IS INTENDED FOR HOUSEHOLD USE ONLY Clearing brushbar obstructions Caution: (i) Switch off and unplug machine before clearing brushbar obstructions. Failure to do so could result in personal injury. (ii) If your brushbar is obstructed, it may shut off. If this happens you will need to remove the brushbar as shown and clear any obstructing debris. Refit

Please keep your purchase receipt in a safe place to ensure you have this information. The serial number is found on the vacuum cleaner’s rating plate, which is behind the clear bin.Tm • All work will be carried out by Dyson, Inc. or its authorized agents. • Any replaced defective parts will become the property of Dyson, Inc. • Service under this warranty will not extend the period of this warranty. • If your machine is not functioning properly, please call the Dyson Helpline at 1-866-693-9766.

Some carpets will fuzz if a rotating brushbar is used when vacuuming. If this happens, we recommend vacuuming in bare floors mode and consulting with your flooring manufacturer. Hard floors or carpets the brushbar will always default to ‘on’ (spinning) each time you switch on the machine and recline it for cleaning. the brushbar will automatically stop if it becomes obstructed. if the brushbar stops during use, please refer to the ‘clearing brushbar obstructions’ section. To switch the brushbar

Your Dyson vacuum cleaner will be covered for parts and labour for 2 years from the date of purchase, subject to the terms of the guarantee. If you have a query about your Dyson vacuum cleaner, call the Dyson Customer Care Helpline quoting the serial number and details of where/when you bought the vacuum cleaner. The serial number can be found on your rating plate which is behind the clear bin. Most queries can be solved over the phone by one of our trained Dyson Customer Care Helpline staff. IM