It is the most effective and intelligent amplification available! • Minimizes background noise and amplifies the human voice only • Eliminates feedback and distortion, allowing for full amplification all the time if needed • Amplifies soft and loud sounds differently to enable comfortable and clear conversations at any volume ClarityLogic® is the latest technology from Clarity that allows for simplified customer support that provides accurate and immediate results. • Clarity representative

The Clarity Professional XL50 offers our patented Digital Clarity Power that uses digital technology to enhance the volume and clarity of your phone conversations. This User Guide and Quick Start Guide will provide you with the information you need to use your XL50 effectively, easily and safely. Read this manual thoroughly before using your telephone. Keep the manual near the telephone for easy reference. Digital Clarity Power™ Technology With Digital Clarity Power, high frequency sounds are am

ENTER Button: press to confirm choices listed on the screen. Arrow Buttons (UP/DOWN): press to navigate through the menu choices, CID and memory records. MENU Button: press to access the menu for CID/memory checking and language setup. DELETE Button: press to delete CID/memory records and to edit names/numbers. MEMORY Buttons: for saved numbers (see MEMORY STORAGE). SPKR (Speaker) Button: press SPKR to engage the speakerphone function; press again to turn the feature off. FLASH Button: use this

Press and hold the desired memory location (M1-M11 and Emergency) to store the number to. The phone will beep to confirm you are in memory programming mode. See Figure 10. 2. Enter the telephone number you wish to store (up to 31 digits). If no button is pressed within 30 seconds, the phone will time out and goes back to idle or talk mode. 3. Press the Hold/Program button to save the desired number. The phone will beep to confirm the number has been saved. See Figure 11. 4. To change a Memory lo

Ameriphone, Amplifying Your Life, Clarity, Clarity Power and the amplification device are trademarks or registered trademarks of Plantronics, Inc. For more information: Does Clarity Power really make a difference? Clarity Power not only makes calls louder, but also easier to understand. The patented Clarity Power technology amplifies and shapes high frequencies to enhance communications for the millions of people who experience high frequency hearing loss, the most common type of hearing los

Figure 9 - Volume Slide Control Note: In standard use of the XL-25s, the amplifier turns off whenever you hang up the telephone. This is a useful feature if many people use the phone. If you want the amplifier to always remain on at the most recent volume setting, slide the switch on the bottom of the phone, as shown in Figure 10. Figure 10 - Internal Amplifier On/Off Using Your XL-25s Using Your XL-25s Incoming Voice Volume The XL-25s provides extra volume (12dB) to increase incoming sound. To

8. Lift the base’s antenna to a vertical position. 9. Set the TONE/PULSE switch located on the back of the base to correct dialing mode. Please check with your local Phone Company if uncertain of the type of service. 10.Place handset in the cradle to begin initial charging. Remember, you must charge the phone for at least 12 hours before you use the phone for the first time. PM050905_W425_RevA.qxd 5/9/05 4:15 PM Page 13 Getting Started HANDSET BATTERY CHARGING The battery in the handset must be

When the power supply cord or plug is damaged or frayed. B. If liquid has been spilled into the product. C. If the product has been exposed to rain or water. D. If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions because improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to normal operation. E. If th

• Dust the unit regularly. Wipe the unit with a soft, damp cloth. Do not use detergents and avoid excess moisture. • The Clarity W1000 is an electrical device. Avoid electric shock by keeping the phone away from water. (i.e.: bathroom, kitchen sink, etc.) 19 TROUBLESHOOTING GUIDE . Phone Will Not Operate Disconnect any other equipment that may be attached to the phone. Check your phone cords and connections. Try a different line cord and/or handset cord to determine if the problem is with one of

Your recording can be up to three seconds long. Fig. 26 - Memory Button 4. After three second there will be a “beep” to tell you recording has stopped. Your recording will be played back immediately so you can check it, followed by a “beep-beep” sound. 5. Now you can repeat steps 3 and 4 if you want to change your announcement or if you want to record an announcement for a different memory button. 6. Otherwise, when you are finished recording, hang up the handset. 7. Slide the ANNOUNCEMENT switc