Tip Note: Observation Enclosed with your telescope you will also find a user’s manual for the Protostar Diagonal Mount Assembly used in the Teleport. Overview Overview top plate carrying strap finder baseplate altitude ring shroud strut clamps serial# plate accessories drawer finder eyepiece focuser spider secondary mirror strut shroud upper clamp lower clamp cover power supply ground board friction damper alititude ring altitude bearing Fig1: The 10” Teleport closed Fig 2: The 10” Teleport open

PORTA features a newly designed friction system for quickly pointing toward the target and tracking it with 360° slow-motion controls. No fumbling with clutches or sectional slow-motion controls! Leave the heavy counterweights with the equatorials: simply balance scopes up to 155mm diameter (and up to 11-lbs/5kg) on the altitude axis and start viewing! Standard Vixen dovetail mounting slot with lock and safety screw is fully SPHINX/GP-compatible. Mounting slot removes to reveal 1/4"-20 and M8-1

@ f/ratio (backfocus) OTA Dimensions Finder, E.P. adapter, mounting Diam. " with ED 0.67x " Length x Tube Diameter x Weight ED81SWT OTA SX-Trim TS-OR-2608 81mm 625mm @ f/7.7 (150mm) 600mm / 23.6" x 90mm x 2.3-kg / 5.1-lb Dot Finder 2" holder, 1W flip mirror w/T-threads tube rings/dovetail plate 3.2" 419mm @ f/5.2 (100mm) ED103SWT OTA SX-Trim TS-OR-2609 103mm 795mm @ f/7.7 (150mm) 820mm / 32.3" x 115mm x 3.6-kg / 7.9-lb 7x50mm 2" holder, 1W flip mirror w/T-threads tube rings/dovet

These scopes have faster focal ratios and a more compact length compared to the prior ED 80S and ED 102S telescopes. In fact, the big ED 115S is shorter than the old ED 102S! The new optics are especially good at suppressing the dispersion of violet light — this avoids halos and blooming around images of bright stars. Coupled with a medium f/7.7 focal ratio, the ED "S" series provide a sharp, color-free image of high contrast for both visual and photographic applications. The big Vixen 60mm draw

The contrast was great with Plato and the Alpine Valley showing a wealth of detail as did Copernicus. Out of curiosity, I set the zoom at the 8mm setting and inserted it in a 3x Barlow (that's almost 300x) with no image breakdown on the Moon and I actually felt I could have gone higher. — Johnson, Pernel. "Vixen ED103SWT Apochromatic" Astromart.com Reviews. Dec. 15, 2005 % ED "S" APO REFRACTORS Visit or call us Mon. - Fri. from 9 a.m. - 5 p.m. ET: 845 469 8660 Copyright © 2002-2004 Vixen Nor

7 ( Step 7 | Your first observation—the Moon! 8 | Step 8 1 Observing Jupiter and Saturn 9 [~Step 9 | Observing the Sun.......................................9 | Step 1 <31 General Cautions 10 HOW TO SET UP THE EQUATORIAL MOUNT TELESCOPE..................................................................11 Roughly Aligning the Polor Axis of the Telescope ............... 11 Using your Polor Axis Scope in the Northern Hemisphere 12 Using your Polor Axis Scope in the Southern Hemisphere 13 Ali

Accessories include a 7x50 finderscope, 20mm LV eyepiece, diagonal prism & triangle accessory tray. Motor drives and a wide range of accessories are available to outfit the mount and telescope to your needs. (Above shown with optional Sky Sensor 2000 Goto system.) Model # TS-PR-3150 Wt: 29.6 kg / 65.1 lbs Sharp & Contrasty Planetary Viewing • Fully Coated Optics • 0.89 arc-sec resolution • Less chromatic aberration than conventional achromats Design Chromatic aberration of achromatic refra

CORRECTION 1.PRISM CONST 0mm 2.SHEET CONST 0mm 3.TEMP : +15°C 4.PRESS : 0900hPa 5.ppm 0ppm MODE A 15 C S0 H. angle 92° 20"30' H. dst. V. dst. The valid range of Pressure input is from 600 to 1120 hPa. (420 - 840 mmHg) . When “Atmospheric Correction”in “Initial Setting 1”has been set to “1. AUTO” or “4. NIL”, “”is displayed to the left of the pressure value on the correction menu screen. When “”is on the screen, the pressure cannot be changed. If “Atmospheric Correction”in “Initial Setting 1”has

Copyright © 2005 PENTAX Industrial Instruments Co., Ltd. All Rights Reserved PENTAX Industrial Instruments Co., Ltd. is a sole proprietor of the PTL software. The PTL software and publication or parts thereof, may not be reproduced in any form, by any method, for any purpose. PENTAX Industrial Instruments Co., Ltd. makes no warranty, expressed or implied, including but not limited to any implied warranties or merchantability or fitness for a particular purpose, regarding these materials and make

[DISP] F4 Switches the display composition in the order "H.angle/H.dst./V.dst.", "H.angle/V.angle/S.dst." and "H.angle/V.angle/H.dst./S.dst./V.dst.". [MODE] F5 Switches the screen between MODE A and MODE B. Mode B [S.FUNC] F1 PowerTopoLite [ANG SET] F2 Brings up the angle setting screen for setting anglerelated parameters (H.ANGLE/%GRADE, H.ANGLE INPUT and R/L REVERSE). [HOLD] F3 Pressing this key twice retains (holds) the horizontal angle shown on the display. [CORR] F4 Brings up the screen for