-Connect the machine to a power source as illustrated (1/2). -The power switch is located above the terminal box. Your machine will not operate unless this switch is on " I ". (1) -Sewing light turns on automatically when the main switch is on " I ". -To start the machine, press on the foot control (4). The speed of the machine is regulated by the amount of pressure exerted on the foot control. B [] Attention: Coneu/t a qua//f/ed e/ectr/c/an if in doubt as to connect machine to power source. Unp

DANGER: To reduce the risk of electric shock: 1. An appliance should never be left unattended when plugged in. 2. Always unplug this appliance from the electrical outlet immediately after using and before cleaning. 3. Always unplug the machine before replacing the light bulb. Replace bulb with same type 5W. WARNING: To reduce the risk of burns, fire, electric shock or injury to persons: 1. Do not allow to be used as a toy. Close attention is necessary when this appliance is used by or near child

Please note, this product is not intended to be a carpet cleaner, only a carpet freshener. DO NOT leave the mop in one stationary position. IMPORTANT ALWAYS vacuum carpet thoroughly before using the steam mop. DO NOT use without the following: • The carpet glider under the mop head • Micro-fiber cleaning pad attached to the mop head • Water in the water tank. ALWAYS insure that the unit is “UNPLUGGED” from the electrical socket prior to filling with water and attaching the micro-fiber cle

Read all instructions carefully. 2. Use iron only for its intended use. 3. To protect against risk of electrical shock, do not immerse the iron in water or other liquids. 4. Never yank cord to disconnect fromoutlet. Grasp plug and pull to disconnect. 5. Do not allow cord to touch hot surfaces. Let iron cool completely before putting away. 6. Always disconnect iron from electricaloutlet when filling with water, emptying, or when not in use. 7. Do not operate iron with a damaged cord, or after the

The included Waranty Registration Card must be filled out and returned within 10 daysof purchase. This is essential for your Waranty to be effective should any problem arise with this product. Should any defect covered by the terms of the limited waranty be discovered within one year, EURO- PRO Operating LLC wil repair or replace any defective part provided the unit is returned by the original purchaser, freight prepaid, to: US: EURO- PRO Operating LLC, 21 Lawrence Paquette Industrial Drive, Cha

S.: 94 Main Mill Street, Door 16Canada: 4400 Bois- FrancPlattsburgh, NY 12901St-Laurent, QC H4S 1A7Tel. :1 (800) 798-7398SAVE THESE INSTRUCTIONS For Household Use Only REV. 03/05 Technical Specifications Voltage: 3.0 Volt DC GETTING TO KNOW YOUR AUTO-OPEN TRASH CAN Illustrations differ from actual 1 1. Garbage Can Base2. Garbage Can Lid3. Automatic Cover4. Bin Ring5. Underside of Lid6. On/Off Switch7. Battery compartment8. Proximity Sensor Adjustment Dial Text Box: IMPORTANT SAFETY INSTRUCTIONS

To fully enjoy the advantages of your appliance, please take a few minutes to read all the “ Use & Care Instructions” andkeep the instructions handy for easy reference. Please review the product warranty and mail the owner registration form. Model GI460 Printed in China 10 IMPORTANT SAFEGUARDS When using your garment steamer/iron, basic safety precautions should always be followed, including the following: 1. Read all instructions carefully. 2. Use garment steamer/iron only for its intended use.

( Fig. 8) To reset your iron and continue ironing follow these steps. 1) Lift iron from ironing board. 2) Holding the iron horizontally in front of you, gently rock the iron back and forth several times. This motion will reset the safety switch inside the iron. DO NOT shake the iron. The ambertemperature ready light will illuminate when the auto shut-off system has been reset. Allow time for the iron to re-heat. The amber temperature indicator light will go out when the iron is ready for use. Fi

ANTI-DRIP FEATURE Built-in Anti- Drip feature helps reduce water spots by cutting the water flow when the iron temperature is too low to build sufficient steam. The anti-drip function reduces water dripping and water stains. It does not prevent water dripping and water stains if you press the steam burst button too often or if the temperature is too low. The amount of water droplets will eventually decrease after the iron is used for 2 to 3tankfulsof steaming and ironing. Fig. 9 Fig. 2 All marke

• Water tank may be empty or water level is very low. Add water. • Make sure that the fabric/temperature setting and the variable steam control are correctly set. For maximum steam, (setting ‘Max’ on steam control), temperature setting should be set on ‘• •• ’. • Variable steam control dial is set on “0”. Always allow the iron to reach the selected temperature with the variable steam control setting at ‘0’. Make sure the temperature setting is set in the correct steam area, e.g. ‘•’, and the ste