Connect the iron to the mains electricity supply Plug in the iron. The warning light goes on and indicates that the iron is heating up. As soon as the light goes out, the set temperature has been reached and the iron is ready for use. 4 ADJUSTABLE STEAM FUNCTION Set the variable steam control to required steam volume. Steam can only be produced when the thermostat is aligned to l l l or max. (red zone). Allow iron to heat up (light goes out) before activating the variable steam control. Anti-dri

“Precision Steam Jet” nozzle (depending on the model) 2. “Precision Steam Jet” button (depending on the model) 3. Humid steam button (depending on the model) 4. Steam control button 5. Temperature control dial for iron soleplate 6. Iron temperature control light 7. Steam generator boiler (in the base unit) 8. Cord fastener Control panel 9. Handles for removing and replacing the water tank 10. Removable water tank 11. Removable water tank filler cover 12. Iron rest 13. Boiler rinse plug (under bo

Steam Chamber Cleaning Function This function allows loose mineral deposits and other impurities that build up inside the iron to be flushed out. This type of self cleaning only needs to be carried out occasionally and never more than once a month. . Fill the iron with cold tap water halfway to the max line and set variable steam lever to min. . Stand on heel and plug in. . Set thermostat dial to maximum (lll ) position. . When the iron reaches the correct temperature, indicator light will go ou

DESCRIPTION OF YOUR APPLIANCE GB 1- Pivoting head 2- Depilator head SOFT-PRECISION 3- Tweezers 4- Hair guides 5- Massaging beads 6- Micro-peeling head 7- Cap 8- 2-speed and stop switch / Precision Light 9- Cleaning brush 10- Adaptor 11- Travel pouch 12a- Peeling patch for normal skin 12b- Peeling patch “SOFT” for sensitive skin Vision Fonction: The Vision system installed in your device gives perfect epilation results first time. By diffusing an ultraluminous halo on the skin, this system makes

Brugsanvisning Bruksanvisning 1 20 cm 20 cm 180 cm 30 cm 2 1 20 cm 20 cm 180 cm 30 cm 2 8+4 6 7 8+4 54 2 10 5 4 11 1 3-L 3-N 1 1 Thank you for purchasing this infrared heater. We hope you will be completely satisfied with this product. To ensure this, please read these instructions carefully before use and keep them in a safe place. ENG 1 - WARNINGS This electrical appliance complies with technical safety and electromagnetic compatibility standards. Never touch your heater when in operation (r

When it is switched on, an electrical heating appliance reaches very high temperatures liable to cause burns. Make sure that all other users are aware of the risks. French standard NFC 15.100 lays down 4 volumes in the bathroom (fig. 1) (see the current standards in your own country). This appliance may only be used in volumes 2 and 3 of such a room. If you have any doubts concerning installation possibilities for this heater, please consult a qualified electrician. ENG Children, the elderl

Reassemble the external unit (7) with screws (8) and fit the screw covers (4) (supplied in the accessory bag). Be careful not to touch the quartz tubes with your fingers to avoid stains. 5 - OPERATION The appliance is switched on by means of the pull switch (5). The slight vibration noticeable when the appliance is switched on stops after a few seconds. 6 - OUTPUT IR100 model - Position 0 : stop - Position 1 : 750 W (intermediate power) - Position 2 : 1500 W (full power) ENG IR150 model - Posi

• Use appliance for its intended use only. • This appliance is not designed to be used by people (including children) with a physical, sensory or mental impairment, or people without knowledgeor experience, unless they are supervised or given prior instructionsconcerning the use of the appliance by someone responsible for their safety. • Children must be supervised to ensure that they do not play with theappliance. • Do not leave appliance unattended while plugged in or while it is still hot. •

Use appliance only for its intended use. 2. To protect against a risk of electric shock, do not immerse the appliance in water or other liquids. 3. The appliance should always be turned off before plugging or unplugging from outlet. Never yank the cord to disconnect from outlet, instead grasp plug and pull to disconnect. 4. Always disconnect appliance from electrical outlet when filling with water or emptying when not in use. 5. Do not allow cord to touch hot surfaces. Let iron cool completely b

2. Turn the unit to off (see section Turning On and Off) and unplug from outlet. 3. Slowly unscrew the boiler cap. Using a water pitcher, fill with 33 oz. of water. Do not fill water tank past the base of the boiler cap thread. Be sure that water does not spill over. If this occurs remove the excess water. 4. Replace the boiler cap and screw it on tightly. 5. Plug back in to electrical outlet. AFTER IRONING 1. Turn the unit off. (Consult section Turning On and Off.) 2. Unplug the appliance. 3. P