78-3610-09 Cisco IOS Release 11.0 BT Release Note and Update to Configuration Guides and Command References January 15, 1999 This document supplements the Cisco IOS Release 11.0 documentation set with new and changed commands that support Cisco IOS Release 11.0(10)BT and later. Note that Cisco IOS Release 11.0(10)BT is the initial release of Cisco IOS Release 11.0 BT. No prior versions of Cisco IOS Release 11.0 BT exist. The TN3270 server function is supported on a Channel Interface Processor ca

Call Forward Call forward allows a user to configure a Cisco IP Phone, so all calls that are destined for it ring another phone. Three types of call forward exist: Cisco CallManager System Guide OL-7135-01 40-33 Chapter 40 Cisco IP Phones Phone Features • Call forward all—Forwards all calls. • Call forward busy—Forwards calls only when the line is in use and busy trigger setting is reached. • Call forward no answer—Forwards calls when the phone is not answered after the configured no answer ring

When available, the IP address of the device and the name of the Cisco CallManager with which the device registered display. The following topics provide information about working with and configuring Cisco IP phones in Cisco CallManager Administration: • Configuring Cisco IP Phones, page 42-2 • Finding a Phone, page 42-26 • Configuring Directory Numbers, page 42-27 • Phone Button Template Configuration, page 43-1 • Phone Configuration Settings, page 42-12 • Phone Configuration Checklist, Cisco

This may take a short while. The handset will automatically be allocated the next available handset number. This handset number is shown in the handset display in standby mode. If the handset registration is unsuccessful, the will still flash and the display will return to "REGISTER", so you will need to repeat the registration process. 7.6 Reset Your Phone You can reset your phone to the default settings . Alter a reset, all your personal settings, call list entries and redial

The firmware helps to initialize the processor hardware and boot the operating system software. You can perform certain configuration tasks, such as recovering a lost password or downloading software over the console port, by using the ROM monitor. If there is no Cisco IOS software image loaded on the router, the ROM monitor runs the router. This appendix contains the following sections: • Entering the ROM Monitor • ROM Monitor Commands • Command Descriptions • Disaster Recovery with TFTP Downlo

If you are reading Cisco product documentation on the World Wide Web, you can submit comments electronically. Click Feedback in the toolbar, and select Documentation. After you complete the form, click Submit to send it to Cisco. We appreciate your comments. 78-6169-02 Cisco 1750 Router Hardware Installation Guide ix About This Guide Audience and Scope Audience and Scope This guide is for users who have some experience installing and maintaining networking hardware. We assume that Cisco 1750 rou

Press will have no effect and an alert tone is emitted. 1. Press

or Scroll UP or DOWN to select SOS NUMBER 1 to 3. Then press the MENU/OK/MUTE to select the one you want to program. Enter the phone number. Then press the MENU/OK/MUTE. You will hear a beep and the number is saved. If you want to save more SOS numbers, press the DOWN to select the next location you want to program,and repeat above steps. Press the PHONE BOOK/BACK until you return to idle mode. Binatone Help Line : 0845 345 9677 25 Advanced use of your phone To Turn on/off key tone Press the MEN