Los Angeles Ca. 90040 Rev. 5/11 CONTENTS Safety regulations.........................................................................................................................3 Electrical precautions................................................................................................................4 Safety instructions.......................................................................................................................5 unpacking.................................

.11g TX Input Power 6dBm Min / 18dBm Max Receiver Gain 12-15dB, 12dB typical Noise Figure 3.5dB typical Connectors N —Type, 50 Ohm Lightning Protection Quarter Wave Technology Power Consumption Tx : <1A / Rx : <160mA @ 9 VDC LED Indication Transmit : Green / Receive : Red AMP Dimensions 110L x 60W x 31H (inm) Operating Temperature — 30C to +70°C ♦ Easy to mount ♦ High switching speed

6. After all the units settings have been set and are plugged in, adjust the sensitivity knob on the bottom of the master unit to make them react to sound. 7. To run a synchronized light show set all the dipswitch on all the fixture to the ‘off’ position. All fixtures will now run in the same exact pattern. 8. You can also use the optional MINI/C Remote Control. If you want to use the optional remote control, connect the MINI/C controller to the first fixture in the line (master). Note: The remo

Claims with imcomplete or illegible writing will not be fulfilled. 3. Attach a photo copy of the dated receipt and the original UPC bar code of qualifying product. 4. Mail To: American Audio Attn: 4GB SD Card Offer 6122 S. Eastern Avenue Los Angeles, CA 90040 5. Rebate runs from 9-1-2008 through 9-30-2008_ American Audio Please fill out completely: Name Phone Store Purchased From Street Address Apt/Suite Store Address/Location City State Zip Code First Item Description Serial Number

CHANNEL FADER CURVE ADJUSTMENT - This rotary knob is used to change the way the channel fader will operate. Each of the two channels has a “Curve” adjustment. The curve on the faders adjust from long or short or any variation of the two. The shorter the curve adjustment the sooner full volume will be reached. 32. CROSSFADER CURVE ADJUSTMENT - This rotary knob is used to change the way the crossfader will operate. The crossfader can operate in different modes, “NORMAL CURVE”, “QUICK CURVE” or any

Tel: +886 2 89431966 Fax: +886 2 89434944

Nominal Impedence: 8 OhmsPower Capacity: 300 Watts Part No. INPUT OUTPUT 1 + = + 1 + = - American Audio®American AudioAmerican AudioWARNING: DO NOT suspend overhead without understanding and following the instructions supplied with the loudspeaker. Nominal Impedence: 8 OhmsPower Capacity: 300 Watts Part No. INPUT OUTPUT 1 + = + 1 + = - To Next Speaker (If Applicable) APX-PowerPro™ Looping FUSE MICLINETREBLEBASSMASTER FUSE MICLINETREBLEBASSMASTER To Next APX-PowerPro™ (If Applicable) From Mixer ©