Determine the best location for the DA1957CT. There is an equalization adjustment on the DA1957CT that will affect all the distributed signals. Therefore, place the DA1957CT as equidistant to all receivers as possible. Step 2. Connect the power adapter to the DA1957CT and plug it into the power outlet. The power indicator LED on the front panel will light red. This indicates that the unit is operational. Step 3. Connect a cable from the Twisted Pair transmitter to the Input connector on the DA19

Input signals on 15-pin D female connector 1 Ground 2 Red 3 Composite Sync 4 Switch 1 (Grounded when switch is ON 5 Green 6 Ground 7 Switch 2 (Grounded when switch is ON 8 No connection 9 Blue 10 Switch 3 (Grounded when switch is ON 11 Ground 4 DISTRIBUTION AMPLIFIERS PIN No. Input signals on 15-pin D female connector 12 Vertical Sync 13 Ground 14 Ground 15 Horizontal Sync Table 4. The DA1406WM Input pin-out PIN No. Output signals on 15-pin D female connector 1 Ground 2 Red 3 Composite Sync 4 No

We are sure you will find it to be reliable and simple to use. The HOMERUN Series Matrix Switchers are designed using state-of-the-art technology and offer a unique combination of features not available anywhere else. We are committed to providing our customers with signal management solutions to the most demanding audio-visual installations. We appreciate your selection of our products and are confident that you will join the ranks of our many satisfied customers throughout the world. This manu

Commands ending in "P" are not executed immediately. The path for outputs on multiple cards or the same card can be loaded. Command Format: [OFFmCnUiP] m = output number (m =1 to 8) n = card ID No. (n = a slot # from 1 to 19) (1 to 8 for MT100-101 or 1 to 4 for MT100-106) P = path Example: If 2 cards are at slot 6 and 7 of unit 3: To enable output 1 and 2 of card 6 and output 3 and 4 of card 7 simultaneously, use the following commands: OFF12C6U3P] [OFF34C7U3P] [SW] If "F" is included use the [O

Extremely rugged and compact, the DA1804NT fits easily into tight spots. Using high-quality 75 ohm coaxial cable, it can drive an NTSC signal 400 ft (122 m) or more. Specifications are subject to change. See for up-to-date information. FEATURES/DESCRIPTION DA1804NT GENERAL Inputs BNC female (1) Outputs BNC female (4) Compatibility NTSC, PAL, SECAM, High Resolution Monochrome Computer Video Table 1. DA1804NT General MECHANICAL DA1804NT Material Gray 0.1” Al Top Label Lexan Height (inches) 1.0 in

The sharpness feature is now active and the [+] and [-] commands may be used for adjustment. 23. [HUEn] This command sets the hue level to an absolute value. NOTE: The Hue adjustment does not apply to Component Video. Command Format: [HUEyyCi] yy = Level (yy = # from 00 to 48, default=24) Ci = UnitID (i = # from 0 to 99) 400-0422-001 12 SPECIAL APPLICATION Example: Send the command [HUE12] to set the output hue to 12. 24. [HUE] This command displays the current hue level and makes the hue functi

These single ended signals allow the source to be distributed to large screen projectors or other displays with excellent quality at long distances. The DA1921SX is designed to be used together with a compatible CAT-5 computer video transmitter, such as model DA1920SX. The DA1921SX is connected to the transmitter using twisted pair CAT-5 UTP (Category 5, 5e, 6) type cable. The DA1921SX is compact and easy to use. It offers a CAT-5 input, two fully buffered outputs and equalization control. It is

Keep this manual handy for future reference. These safety instructions are to ensure the long life of your DA1931CT and to prevent fire and shock hazard. Please read them carefully and heed all warnings. 1.1 GENERAL • Qualified ALTINEX service personnel, or their authorized representatives must perform all service. 1.2 INSTALLATION • To prevent fire or shock, do not expose this unit to rain or moisture. Do not place the DA1931CT in direct sunlight, near heaters or heat radiating appliances, or n

could void the user’s authority to operate the equipment. ABOUT YOUR DISTRIBUTION AMPLIFIER 2 The DA1203RM Distribution Amplifier is designed to allow the connection of a single computer or other video source to as many as three scan-rate compatible display devices. Though primarily designed to pass RGBS format signals, the DA1203RM can also pass RGsB, Component Video (Y, R-Y, B-Y), S-Video (Y/C), and Composite Video by using the appropriate analog channels (Red, Green, Blue). The analog channel

This enables it to be compatible, with both current and older display equipment. The Sync Polarity switch reverses the polarity of the incoming sync for compatibility with various displays The DA1203RM Distribution Amplifier is a state-ofthe- art product with a video bandwidth of 350 MHz, enabling it to remain transparent to the video signal passing through it. Each output is individually buffered and is not affected by other output loading. The DA1206RM offers an internal 90-140/200240V power s