0 Cosmopolitan This recipe makes two martinis. ice cubes to max ice fill line 4 ounces citrus flavored vodka 2 ounces Cointreau® 2 ounces cranberry juice juice of . lime lemon twists Fill your Waring Pro™ Martini Shaker with ice. Add the vodka, Cointreau®, cranberry juice, and lime juice to shaker. Cover shaker with shaker strainer and insert the shaker into the unit. Press shake. Remove shaker from unit and remove shaker cap, then strain into 2 chilled martini glasses. Garnish each glass with a

Important Keep your carton packaging until your wine cabinet has been thoroughly inspected and found to be in good condition. If there is damage, the packaging will be needed as proof of damage in transit. Note to Customer This merchandise was carefully packed and thoroughly inspected before leaving our plant. Responsibility for its safe delivery was assumed by the carrier upon acceptance of the shipment. As directed on the side of your packing carton, claims for loss or damage sustained in tran

Important Keep your carton packaging until your wine cellar has been thoroughly inspected and found to be in good condition. If there is damage, the packaging will be needed as proof of damage in transit. Note to Customer This merchandise was carefully packed and thoroughly inspected before leaving our plant. Responsibility for its safe delivery was assumed by the retailer upon acceptance of the shipment. Claims for loss or damage sustained in transit must be made on the retailer as follows: • E

Adjustable Temperature Control The temperature control is fully adjustable from the low forties to the mid-sixties. The range allows flexibility of temperature preferences. Interior Light and Switch The interior light makes it easy to view your wine labels and enhances the display of your collection. To engage the display light, press the “LIGHT” button on the display panel. The light will come on and stay on with the door closed. To disable the display light, press the “LIGHT” button again. The

Released electrolyte is corrosive and may cause damage to the eyes or skin. It may be toxic if swallowed. 4. Handle batteries carefully in order to prevent shortcircuiting the battery with conducting material such as rings, bracelets and keys. The battery or conductor may overheat and cause burns. 5. Charge the battery/batteries provided with or identified for use with this product only in accordance with the instructions and limitations specified in this manual. 6. Do not mix old and new batter

The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the unit’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the unit. 3 LOCATION OF CONTROLS AND INDICATORS 3

Be sure to position the adapter with the backside flange tight to the dispenser. 2. Using the slotted holes in the adapter as a template, drill four (4) 9/64” diameter holes at the bottom of the slots. NOTE: Do not drill deeper than 1/4” past the sheet metal. Use a drill stop! 3. Fasten adapter to dispenser using the four (4) #8 screws supplied with the adapter kit. 4. Set the ice machine on top of the adapter. Align holes in ice machine front angle with the rivnuts on the adapter. 5. Secure

Box 1720, Manitowoc, WI 54221-1720 USA Telephone 920-682-0161, Fax - Sales: 920-683-7589, Service/Parts: 920-683-7585, Other: 920-683-7879 8005843 Web Site - Rev. 04/12/02 Cornelius ABS or ED150 Dispenser

Using the adapter as a template, drill two 5/32” (4 mm.) holes, .500” (12.7 mm.) deep maximum, in the back of the bin. Warning: Do not drill through interior liner. Attach with (2) 10-24 x .500” screws provided. B. Apply foam tape to the edge of the adapter opening as shown in the (A) position. Note: It is recommended to RTV intersections and along front inside edge of foam tape (see drawing) to prevent water tracking. C. Place the ice machine on the adapter. Secure it to the adapter as shown

Using the adapter as a template, drill three 5/32” (4 mm.) holes, .500” (12.7 mm.) deep maximum, in the back of the bin. Warning: Do not drill through interior liner. Attach with (3) 10-24 x .500” screws provided. B. Apply foam tape to the edge of the adapter openings as shown in the (A) position. Note: It is recommended to RTV intersections and along front inside edge of foam tape (see drawing) to prevent water tracking. C. Place the ice machines on the adapter. Secure them to the adapter wit