Refer to the diagram on the holder to orient the batteries properly. Replace the holder back into the battery compartment and replace the lid. For reference: the battery pack fits in with wires on the bottom right. (See arrow in photo). Use only fresh batteries. Using old or low batteries may cause error messages. An optional AC adapter and 12V car plug cable are also available for purchase at #2 knob Step 5. Attach telescope to mount using dovetail lock knob (#2). iOptron Corp. | 6E Gill Street

MiniTowerTM Overview.............................................................................................................. 4 1.1. MiniTowerTM Features ......................................................................................................... 4 1.2. MiniTowerTM Components .................................................................................................. 7 2. MiniTowerTM Assembly ................................................................................

select the one you want to watch by press Do not use a commercial photographic ENTER. Follow the screen prompt to lens cleaner. confirm the selection. After you are done, 4. Organic materials (e.g., fingerprints) on press BACK to back to Watch List menu. the front lens may be removed with a solution of 3 parts distilled water to 1 You also can delete one or all objects in part isopropyl alcohol. Use soft, white your watching list. After the watch list is set, facial tissues or cotton balls and m

Press < or > key, move the cursor to the line below time info to set the time zone information (add or subtract 60 minutes per time zone). Enter minutes “ahead of” or “behind” UT (universal time). • New York City is 300 minutes “behind” UT • Los Angeles is 480 minutes “behind” UT • Rome is 60 minutes “ahead of” UT • Beijing is 480 minutes “ahead of” UT • Sydney is 600 minutes “ahead of” UT All the time zones in North America are behind UT (universal time), as shown in the following table. So mak

Set Up USB-PC Connection Before a computer being used to control the mount or update the firmware, a connection between PC and 8402G Hand Controller has to be established. There are two versions of 8402 HCs, namely 8402G and 8402A. The USB2COM chipsets used in these two HCs are different. To identify your HC’s version, please read the initial LCD screen when the mount is turned on. If it is an 8402G Hand Controller, the LCD screen shows following when it is turned on: GOTONOVATM 8402G V071022W 1

• 130,000 object database with 256 user.defined objects • The largest LCD screen on the market with 8 lines and 21.character Hand Control with backlit LED buttons. • USB Port for PC Laptop control and firmware upgrades (ASCOM protocol) • Metal worm & gear for increased stability & performance • Drive motor with 9.speed setting for precise tracking • Dual.axis Servomotor • Standard.equipment AC adaptor (Optional DC adaptor available) • 1.inch full height tripod with metal hinges • Built.in 32.Cha

The most intuitive controller on the market. • Over 5,000 object database. • Built-in 32-channel GPS (#9803 only) • Large LCD screen with 4 lines and 21-character wide screen • Drive motor with 5-speed setting for precise tracking. • Dual-axis Servomotor • Aluminum tripod • 114mm Newtonian reflector telescope PACKAGE CONTENTS • SmartStar® telescope mount • #8405 Hand Controller • Built-in GPS receiver (#9803only) • Controller Cable • 114mm Newtonian reflector telescope • Red dot finder scope • T

• Dual-axis Servomotor • Aluminum tripod • 80mm achromatic refractor telescope PACKAGE CONTENTS • SmartStar® telescope mount • #8405 Hand Controller • Built-in GPS receiver (#9801 & #9802 • Controller Cable only) • 3x Barlow lens • 80mm Refractor telescope • 45. diagonal • Tripod • K 10mm and K 25mm eyepieces ONLINE CONTENTS (click under “Support” menu button) • Full manual (you can refer to the full manual for more details on set-up and operation). • Tips for operating • Reviews and feedback fr

Step 4. Lift the battery cover. Carefully pull out the battery holder from the compartment. Be sure not to accidentally disconnect the wires. Step 4a. Insert 8 AA batteries (not included) in the holder. Refer to the diagram on the holder to orient the batteries properly. Replace the holder back into the battery compartment and replace the lid. For reference: the battery pack fits in with wires on the bottom right. (See arrow in photo). Use only fresh batteries. Using old or low batteries may cau

One of the most intuitive controllers on the market. • Over 5,000 object database. • Built-in 32-channel GPS (#9801 & #9802 only) • Large LCD screen with 4 lines and 21-character wide screen • Drive motor with 5-speed setting for better control. • Dual-axis Servomotor • Aluminum tripod • 80mm achromatic refractor telescope PACKAGE CONTENTS • SmartStar® telescope mount • #8405 Hand Controller • Built-in GPS receiver (#9801 & #9802 • Controller Cable only) • 3x Barlow lens • 80mm Refractor telesco