See Cutting Height Adjustment. 3. Check that the wheels and rollers can rotate freely. 4. If problem persists? Immediately disconnect from the mains electricity supply and consult your local approved Service Centre. Service Recommendations 1. We strongly recommend that your product is serviced atleast every twelve months, more often in a professional application. 2. Always use genuine Spare Parts. 3. Prepacked spares are available from most Husqvarna UKLtd. stockists. 4. Your product is uniquely

Do not wire an extension cable directly to your product The wire which is coloured BLUE must be connected yourself. Please contact your local Approved Serviceto the Terminal which is marked with the letter 'N' or Centre for further information on the connectors and coloured BLACK. kits available. The wire which is coloured BROWN must be con3. Only use extension cables specifically designed fornected to the Terminal which is marked with the letter outdoor use. 'L' or coloured RED. CONNECTORS - IM

Never cut grass by pulling the mower towards you. R.C.D. every time you use it. 10. Switch off before pushing the mower over surfaces 2. Before use, examine cable for damage, replace it ifother than grass. there are signs of damage or ageing. 11. Never operate the lawnmower with damaged guards or 3. Do not use the lawnmower if the electric cables are without guards in place. damaged or worn 12. Keep hands and feet away from the blade at all times and es4. Immediately disconnect from the mains el

Make sure the cable is not trapped between the handles. Upper Handle Assembly D E Venturer 370 RE420/420c Grassbox Assembly F G Venturer 370 Grassbox Assembly - Venturer 370. 1. Insert the grassbox handle into the top of one of the grassbox halves. Press firmly down and forward until the handle clicks into position (F) 2. Turn the grassbox half over and insert screw into hole (as illustrated in fig F) and tighten fully. 3. Locate grassbox upper into grassbox lower (G). Align clips, ensure all cl

14. Do not put hands near the grass discharge chute. 15. Never pick up or carry a mower when it is operating or still connected to the mains supply. STOP 16. Remove the plug from the mains : -before leaving the mower unattended for any period; -before clearing a blockage; -before checking, cleaning or working on the appli- ance; -if you hit an object. Do not use your lawnmower until you are sure that the entire lawnmower is in a safe operating condition.; -if the lawnmower starts to vibrate abno

Fitting the Blade and Fan 1. Ensure the fan is located correctly.(T) 2. Fit the blade to the fan with the sharp edges of the blade pointing away from the fan. 3. Re-assemble blade bolt through blade and fan. 4. Hold the fan firmly and tighten blade bolt firmly with the spanner provided. Do not over tighten. 5. Do not use a longer spanner. T blade blade bolt fan Fault Finding Hints Caring for your Lawnmower Cleaning (U) • USE GLOVES • IMPORTANT It is very important that you keep your lawnmower cl

wingknob x 4 grassbox tongue grassbox handle Easimo only deck 2. Never allow children or people unfamiliar with the instruc-signs of wear or damage and repair as necessary. tions to use the machine. 4. Replace worn or damaged blades together with their 3. Stop using the machine while people, especially children, fixings in sets to preserve balance. or pets are nearby. Use 4. Only use the product in the manner and for the func-1. Use the product only in daylight or good artificial light. tions de

• When the window/grassbox is full it is time to empty the grassbox. grassbox empty grassbox full G 1 2 3 H Visimo Only Cutting Height Adjustment Cutting Height Adjustment (K) & (L) • Height of cut is adjusted by raising or lowering the Front and Rear Wheels. • There are five heights of cut on this product. • NOTE A medium height of cut is recommended for most lawns. The quality of your lawn will suffer and collection will be poor if you cut too low. HEIGHT OF CUT WHEELS POSITION Low Front posit

-before leaving the product unattended for any period; 9. Switch off, remove plug from mains and examine -before clearing a blockage; electric supply cable for damage or ageing before -before checking, cleaning or working on the appliance; winding cable for storage. Do not repair a damaged -if you hit an object. Do not use your product until you cable, replace it with a new one. Use only Flymo re-are sure that the entire product is in a safe operating placement cable. condition.; 10. Always wind

Locate fully assembled grassbox onto 2 location points (G3) at the rear of the deck as illustrated in pic. H 4. Locate safety flap onto the top of the grassbox. Ensure the grassbox is securely located. • IMPORTANT ! AFTER FITTING ENSURE NO GAP REMAINS BETWEEN THE SAFETY FLAP AND THE GRASSBOX. • Removal is the reverse procedure. • For larger areas of grass where grass collection is not required you can use your lawnmower without the grassbox. Ensure the Safety Flap is fully closed. The design of