This dual-speed hub contains two internal repeater buses – one for 10Mbps traffic and another for 100Mbps traffic. Traffic passing between attached devices that operate at the same speed is confined within the appropriate repeater bus. The components of the Zilla Hub are shown in the figure below: Zilla Hub Check the Package The Zilla Hub includes: • 1 Zilla Hub • 1 DC Power Adapter • This user guide • 1 registration card (please return) RJ-45 Connectors Accton’s Zilla Hub features 8 10BASE-T/10

The arrow in the center is pointing to the right indicating that Access Point Mode is active. Figure 29: Launching; Software Access Point icon OR Wireless LAN802.11b/gDevice It is possible to launch the SoftAP™ with a right click on the SoftAP™ icon. When a right click is made on the icon the SoftAP™ icon menu appears. Select Show from this menu to bring up the Wireless SoftAP™ dialog box. Figure 30: Launching; Software Access Point icon menu The Wireless SoftAP™ dialog box appears as shown in f

Microsoft, Encarta, MSN, and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. SoftAP™ is the registered trademark of PCTel. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. PART NUMBER 5991-0114 Wireless LAN 802.11b/g Device Table Of Contents 1 Introduction..........................................................................

To end the CLI session, enter [Exit]. Console# Username: guest Password: [guest login password] CLI session with the switch is opened. To end the CLI session, enter [Exit]. Console#enable Password: [privileged level password] Console# Configuration Commands Configuration commands are privileged level commands used to modify switch settings. These commands modify the running configuration only and are not saved when the switch is rebooted. To store the running configuration in non-volatile storag

There is no need for you to manually configure encrypted passwords. Example Console(config)#enable password level 15 0 admin Console(config)# Related Commands enable (4-18) Command Line Interface IP Filter Commands Command Function Mode Pag e management Configures IP addresses that are allowed management access GC 4-26 show management Displays the switch to be monitored or configured from a browser PE 4-27 management This command specifies the client IP addresses that are allowed management acce

When not connected to a fiber cable, the cover should be replaced to protect the optics. 2. Check that the fiber terminators are clean. Dirty fiber terminators on fiber optic cables will impair the quality of the light transmitted through the cable and lead to degraded performance on the port. 3. Connect one end of the cable to the MT-RJ port on the switch and the other end to the MT-RJ port on the other device. Since MT-RJ connectors are keyed, the cable can be attached in only one orientation.

Single-Port 1000BASE-SX Gigabit Module Using multimode fiber optic cable, the 1000BASE-SX port can be connected to a remote site up to 550 m (1805 ft) away. The 1000BASE-SX Gigabit module operates at 1 Gbps, with support for full-duplex mode and flow control. This module is fitted with an SC connector, but you can attach an ST plug to the switch using the SC-ST Converter (Part Number: ST5002). Note: If the attached device does not support auto-negotiation, you will have to manually configure the

The VDSL connection delivers an Ethernet data link rated up to 15 Mbps symmetric (full duplex), while simultaneously supporting standard telephone services. The system can be deployed in any multi-dwelling/multi-tenant environment (apartment blocks, hotels, or office complex) to provide both high- speed Internet access and telephone services without any need for re-wiring. Accton’s VDSL Switch-VS2512A and VDSL-Splitter-VM2524/VM2548 combine both the data and phone signals coming from your Intern

The compact and el- egant design of VM1188T allows users to make VoIP calls at work, home, and on campus with POTS like voice quality The modulation of VM1188T is based on the WiFi standard; it is compatible with almost all standard 802.11b/g access points. With the VM1188T, users can access to both PSTN and SIP networks as long as there is a trunking gateway available at the CO side. With the easy startup, users don’t have to remember the SSID or security key of each AP, the VM1188T stores thes

USB Hu. Introduction Accton.s USB204A offers a convenient and cost-effectiv. means of bringing Universal Serial Bus (USB) connectivity t. the desktop. Accton.s Universal Serial Bus products featur. true plug-and-play connection of PC peripherals "outside th. box" and mark a significant advance in desktop cabl. management. These state-of-the-art, practical product. provide ease-of-use benefits to PC users in the home, office. and on the road. The USB204A provides 4 downstream ports, for connectio