Access: From your office ............................................................................................ 3 II. Access: From any phone .......................................................................................... 3 III. Voice Mail Options .................................................................................................. 3 IV. Access: Internet ........................................................................................................ 5 V. Clea

#subnet mask: #default gateway: #dns1: #dns2: # Time Server Settings## ===================== #time server disabled: 1 # Time server disabled. #time server1: # Enable time server and enter at #time server2: # least one time server IP address or #time server3: # qualified domain name # Time Server Disabled: # 0 = false, means the time server is not disabled. # 1 = true, means the time server is disabled. # NAT Settings# =============== # Option 1: # # If you are connecting to a Nortel MCS call ser

Format IP address or fully qualified Domain Name Default Value 0.0.0.0 Range Not Applicable Example sip backup registrar ip: 192.168.0.102 A-46 41-001160-00, Rev 01 Release 2.0 Configuration Parameters Operational, Basic, and Advanced Parameters Parameter – sip backup registrar port Backup Registrar Port (in Web UI) Aastra Web UI Advanced Settings->Global SIP-> Basic SIP Network Settings Configuration Files aastra.cfg, .cfg Description The backup registrar's (typically the backup SIP proxy)

5-152 41-001160-00, Rev 01 Release 2.0 Operational IP Phone Features Operational Features Priority Alerting Priority alerting on the IP phones is a feature that allows incoming calls to trigger pre-defined ringing or call waiting alert tones. You can enable or disable priority alerting on the IP phone for the Asterisk, Broadworks, and Sylantro servers using the configuration files and the Aastra Web UI. Configuration of priority alerting is on a global-basis only. How Priority Alerting Works Whe

Note: Both the “Directed Call Pickup” feature and the “Playing a Ring Splash” feature are disabled by default. Operational 41-001160-00, Rev 01 Release 2.0 5-51 IP Phone Administrator Guide Operational Features Operational IP Phone Features Enabling/Disabling Directed Call Pickup Use the following procedure to enable or disable the Directed Call Pickup feature on the IP phone. Configuration Files To enable/disable Directed Call Pickup on the IP phone using the configuration files, see Appendix A

SBC or ALG proxy/registrar The phone at IP address 10.10.10.20 is configured to register with the proxy at 63.251.195.20. Because the proxy/registrar has session border control (SBC) or application layer gateway (ALG) functionality, no additional IP phone configuration is required. Other proxy/registrars The phone at IP address 10.10.10.30 is configured to register with the proxy at 63.251.195.30. Because this proxy/registrar is not a Nortel proxy and has no SBC or ALG functionality, the configu

A discreet tone alerts you to the new caller, so you can answer your second incoming call by putting your first caller on hold. The IP phones use the following Bellcore-specified call waiting tones. Minimum Nominal Maximum Bellcore Pattern Duration Duration Duration Call-Waiting Tone ID Pattern (ms) (ms) (ms) CallWaitingTone 1 1 Tone On 270 300 330 Bellcore-dr2 2 Tone On 90 100 110 CallWaitingTone2 Tone Off 90 100 110 Bellcore-dr3 3 Tone On 90 100 110 CallWaitingTone3 Tone Off 90 100 110 Tone On

The information contained in this documentation is subject to change without notice. Aastra Telecom Copyright 2005 Aastra Telecom All Rights Reserved. Printed in Canada. Table of Contents Introduction......................................................................................................................... 1 Phone Features ................................................................................................................. 1 Requirements ................................

Format Integer Default Value 0 Range Not Applicable Example sip outbound proxy port: 5060 Parameter – sip registrar ip Registrar Server (in Web UI) IP Phone UI Options->SIP Settings Aastra Web UI Advanced Settings->Global SIP-> Basic SIP Settings Configuration Files aastra.cfg, .cfg Description The address of the registrar for which the IP phone uses to send REGISTER requests. A SIP registrar is a server that maintains the location information of the IP phone. A global value of 0.0.0.0 disa

2 From the Services menu, select "Voicemail". 3 Use the rand sto scroll through the line items in the Voicemail List. 4 When you have selected a line item, press the d/f handsfree key, 4Scroll Right key, or press a line softkey to make an outgoing call using the voicemail access phone number associated with the line for which the voicemail account is registered. From a selected item in the Voicemail list, you can also lift the handset (go offhook) to make an outgoing call using the voicemail acc