Before Out to TVs Incoming CATV or antenna coax Now attach the supplied coax jumper back to the existing splitter and tighten all connections with a 7/16” wrench. After Mount the injector within 4” of the splitter Supplied coax jumper goes back to splitter Out Incoming CATV or to TVs antenna coax © 1999 Installation The camera wire from the shown. prepare the Cat 5 wires stripping 1” of outer sheath and 1/8” of insulation insert the 6-32 screws into frame and bottom holes of gang box gasketframe

Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation, e) If the product has been dropped or damaged in any way, and f ) When the product exhibits a distinct change in performance - this indicates a need for service. 22) Replacement Parts - When re placement parts are required, be sure the service techn

Any change or modification to this device without the permission of Linear LLC may void the user's authority to operate this equipment. Linear® (760) 438-7000 USA & Canada (800) 996-5225 Toll Free FAX (800) 468-1340 OVERVIEW The SVC-10 is a complete audio/video/IR over CAT-5 tranmission system. Each SVC-10 includes a rack-mountable transmitter and a small receiver unit. The SVC-10 can transmit either composite video or S-video and either Pro-logic encoded analog stereo or Digital audio. The

(NOTE: The C-BCK will not work if your cable company has filled then entire TV spectrum to CATV channel 125.) [ I 38 I WH0 eEJy Video distribution system with modulators JL SB msN 3S \\ Example: Modulator set to UHF 25. Tune TV to channel 3 to watch cable (select channel using set-top box) [C3D LIMITED WARRANTY STATEMENT Linear LLC warrants this product to be free from defects in material and workmanship for 2 years. The time period will be measured using the date code labeled on t

When used with an H511, video received from the H722 is used to create a new channel to add to existing television channels. The H722 is connected to the H511 by a single run of CAT-5 wire. Although this camera mount is intended for use indoors, or under an eave, a drip cap is supplied for use in exposed areas. Two models are available: Model H722 Model H722C Black & White, 2 lux, 3.6 mm lens, smoked window Color, 8 lux, 3.6 mm lens, smoked window Note: The H722 is not a standalone video camera

The channel injector designed to mount indoors or outdoors close or antenna feed. The system uses the existing in the house. The CatCam was designed to work with Cat 5 wiring. system will function with quad wire, Cat 5 delivers the picture. The Cat 5 allows the use of an automatic line length and picture compensator. Quad wire does not take advantage of this enhancement. Model Differences: The model 9500HHR series is a high headroom design for CATV and off air antenna feeds only. (5-806MHz) The

default for the 9500 series. However, if the cable services uses HRC or the TV appears to search for the “created channel”, channel injector for HRC. For HRC enter 98. Reset to IRC by entering 99. Entries 98 and 99 are for setting HRC or IRC only. They will not change the channel number. With programming complete, test each TV in the system to see that it is receiving the new channel. How to Determine which source on and one unused channel avoid interference. channels and appear © 1999 Upper rig

may void the user's authority to operate this equipment. The ChannelPlus SVS-52 is a five input audio/video selector. The SVS-52 has inputs for S-video, composite video, analog audio and digital audio. The selected video output is available on two separate but equal outputs. The SVS-52 also has video convertion for viewing S-video on composite or viewing composite video on Svideo. Aremote control is included for easy input selection. FRONT PANEL CONTROLS: 2 VIDEO SELECTION S-VIDEO/COMPOSITE SELE

Problem: Poor video quality at one location. Try this: 1) Check CAT-5 connection from SVD-8 to the SVC-10R receiver. 2) Check proper dial setting on the SVD-8 for that location. Troubleshooting hints: - Problems that appear at all locations are likely due to connection errors between the SVC-10 transmitter and the SVD-8. - Problems that appear at only one location are likely due to connection errors between the SVD-8 and the SVC-10R receiver. - Proper termination is key - verify the correc

Do not defeat the safety purpose of the polarized plug. 13) Power-Cord Protection - Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product. 2 Notes: OO Specifications: typical @ 25 C ± 5 C 5515 Modulator Inputs video 1Vp- p@75 audio 1 V rms @ 47k L & R inputs combined for monaural performance Video differe