If they are okay, check your amplifier or receiver. • If the CD skips, check the CD for dirt or scratches. Do not assume that the CD player is defective. Many CDs are recorded out of spec and will skip on most or all CD players. Before sending the unit in for repair, try playing a CD that you are sure plays properly. SPECIFICATIONS GENERAL: Type.................... Dual Mechanism Compact Disc Player w/wired remote Disc Type............................... Standard Compact discs (12 cm & 8 cm) Tim

PS-540. 32 4038 39 37 36 44 45 43 42 41 33 34 35 20 21 22 23 30 31 24 25 26 27 18 17 16 14 15 48 29 46 Page 2 PS-540. Page 3 located on the rear panel. The stereo line inputs will accept any line INTRODUCTION level input such as a CD player, a cassette player, etc. Congratulations on purchasing the Gemini PS540i mixer. This state of . The phono inputs will accept only turntables with a magnetic cartridge. the art mixer includes the latest features and is backed by a three year limited warranty,

This state of the art turntable includes the latest features. Prior to use, we suggest that you carefully read all the instructions. - Fully manual direct drive turntable - Ultimate high torque (5 kg) direct drive turntable - Adjustable +/-10% or 20% pitch button w/ LED - Variable pitch slide control - Convenient retractable start/brake delay rotary controls - Solid aluminum platter with easy glide grooves and rubber damping - Silver metal plate w/ rubber painted base - Straight tone arm for sup

When you have selected the proper track press PGM and the CDM-3600 will be ready to set your next selection. Repeat the previous steps until you have completed your playlist, then press play to begin the set list. REPEAT: Press the repeat button once to engage ( 1) or repeat the selected track. Press REPEAT again to engage ALL setting wich will repeat all the tracks on the CD. Press REPEAT again to disengage the repeat function. SINGLE: Pressing the SINGLE button engages SINGLE mode, in this mod

Wenn kein CD oder AUX Eingang vorhanden ist, kann jeder Leitungseingang (nicht Phono) verwendet werden. FUNKTIONSBESCHREIBUNG NETZSCHALTER: Nachdem sichergestellt wurde, da.der Schieberegler VOLTAGE SELECTOR SLIDE SWITCH (3) auf der hinteren Schalttafel richtig eingestellt ist, die Einheit einstopseln und den Netzschalter POWER (2) einschalten. Damit wird die Einheit eingeschaltet. Wenn der Schalter POWER (2) ein zweites Mal gedruckt wird, wird es ausgeschaltet. CD-FACH: Im CD-Fach -DISC TRAY (1

The CS-02 features a wide array of premium features such as channel-assignable DSP Effects module and an Auto-BPM feature with rotary tempo control. This new mixer also comes with loads of inputs that you can assign to absolutely any channel you desire. With all this and more, the CS-02 serves as a solid contender for high-end mixers in the industry. • 5 Channels with pre-fader LED VU meters and 3-band rotary EQ • 3 Mic, 10 Line, and 3 Phono/Line Convertible Inputs • Master, Booth, Record, an

5. Set the channel selector pins (7) on both the transmitter and receiver to the desired frequency as indicated on the included Frequency Chart. 6. Adjust the volume using the level control (4) on the front panel. Note: Effective range between the transmitter and receiver is up to 250 feet. The UHF-216 dual channel UHF series wireless system is two separate single channel transmitters of different frequencies transmitting to one unit that houses both frequency receivers. There is also individual

Page 1 Page 2 1 3 5 6 7 13 1210 11 2 8 9 14 15 19 20 16 17 18 4 4A INTRODUCTION Congratulations on purchasing a Gemini CD-210 CD Player. This state of the art professional CD player is backed by a three year warranty, excluding lasers. One year warranty on CD lasers. Prior to use, we suggest that you carefully read all the instructions. CAUTIONS Do not use this CD Player at temperatures below 41°F/5°C or higher than 95°F/35°C. Place the unit in a clean and dry location. Do not place the unit in

Place the track in PAUSE mode. This will activate the stutter mode. Then use the JOG WHEEL (23) for fast, precise searching. SEE JOG WHEEL (23) for more info. Once you have found the point at which you would like to begin playing, do not further adjust the JOG WHEEL (23). Then press PLAY/PAUSE (8) rapidly. Then CUE (7) LED will blink. Your CUE is now stored into the unit's memory. Press CUE (7) to scan to the CUE point. This will pause the CD at the point of cue. Press and hold the CUE (7) but

Pressing the SINGLE (15) button a third time deactivates the CONTINUOUS function. TIME: The TIME (16) button switches the time display between the three available choices listed under DISPLAY. LOOP IN: Pressing the LOOP IN (17) button while a track is playing will set a loop point. LOOP OUT: After a loop point is memorized, pressing LOOP OUT (18) in play mode will repeat the section between the first loop point and a second loop point when the LOOP OUT (18) button was pressed. Press LOOP OUT