Vendor does not authorize any person or company to assume for it any other obligation or liability in connection with the sale, installation, use, removal, return, or replacement of its equipment, and no such representations are binding on Vendor. Blue Rhino Global Sourcing, LLC Winston-Salem, North Carolina 27105 USA (800) 762-1142 Cleaning and Care (continued) Troubleshooting If the problem is: And this condition exists: Then do this Pilot won’t light Note: Heater operates at reduced efficienc

It is imperative that control compartment, burners and circulating air passageways of the heater be kept clean. • Check heater immediately if any of the following conditions exist: • The smell of gas in conjunction with extreme yellow tipping of burner flames. • Heater does not reach proper temperature. Note: At temperatures less than 40°F, heat output will be reduced. • Heater's glow is excessively uneven • Burner makes popping noises during use. Note: A slight pop is normal when burner

Make sure there are no obstructions of airflow to the burners. Spiders and insects can nest within and clog the burner / venturi tube at the orifice. A clogged burner tube can lead to a fire beneath the appliance. 3. All control knobs must be in the “OFF” position. (Figure 3) 4. Turn natural gas line valve to “OPEN”. 5. Select burner to light. Push and turn control knob counterclockwise to “HIGH”. 6. Press the electronic igniter button and hold for 5 seconds to light burner. 7. If ignition does

6 Specifications..................................................... 6 Troubleshooting ................................................... 6 Save these instructions for future reference. If you are assembling this unit for someone else, give this manual to him or her to read and save for future reference. Manufactured in China for: Blue Rhino Global Sourcing, Inc. Winston-Salem, NC USA 1.800.762.1142, © 2008 Blue Rhino Global Sourcing, Inc. All Rights Reserved Endless Summer® is a Registered Tr

EWUR730SP WARNING FOR YOUR SAFETY: For Outdoor Use Only WARNING FOR YOUR SAFETY: 1. Improper installation, adjustment, alteration, service or maintenance can cause injury or property damage. 2. Read the installation, operation, and maintenance instructions thoroughly before installing or servicing this equipment. 3. Failure to follow these instructions could result in fire or explosion, which could cause property damage, personal injury, or death. Danger Do NOT use electric heater for cooking. N

b. If you continue to see bubbles after several attempts, turn LP gas tank valve to “CLOSED” and disconnect LP gas tank and contact 1.800.762.1142 for assistance. c. If no bubbles appear after one minute turn LP gas tank valve to “CLOSED”, wipe away solution and proceed. Operating Main Burners First Use 1. Make sure all labels, packaging and protective films have been removed from the grill. 2. Remove manufacturing oils before cooking on this grill for the first time by operating the grill for a

2. Do NOT use this outdoor fireplace for indoor heating. TOXIC carbon monoxide fumes can accumulate and cause asphyxiation. 3. This outdoor fireplace is NOT for commercial use. 4. This outdoor fireplace is NOT to be operated by children. 5. This outdoor fireplace is NOT to be used in or on boats or recreational vehicles. 6. Always use in accordance with all applicable local, state and national codes. Contact your local fire department for details on outdoor burning. 7. When using this outdoor fi

Never touch ashes or coals to see if they are hot. 27. Do NOT leave a lit outdoor fireplace unattended, especially around children and pets. 28. Do NOT attempt to move or store this outdoor fireplace until all ashes and coals are completely extinguished. 29. Do NOT remove ashes or coals until they are completely and fully extinguished. 30. Use heat-resistant gloves or hot pads when contacting handles. 31. Use long, sturdy fireplace tools when adding or moving logs. 32. Do NOT place wood directly

Do not return to place of purchase. Owner’s manual: model 200605 outdoor patio heater Assembly Instructions General Components & Features Familiarize yourself with all components before proceeding. Refer to page 5 for hardware and components, and page 21 for specifications. Do NOT attempt assembly unless all components are available. If you believe a component is missing or damaged, contact 1-800-762-1142 for assistance. Note: All hardware is mounted on a cardboard pack and numbered to match the

• Clear an area large enough to layout all components and hardware • When applicable, tighten all hardware connections by hand first Once the step is completed, go back and fully tighten all hardware . • Follow all steps in order to properly assemble your product Attach bowl handles Attach bowl handles to bowl using 4 sets of screws (A) and large washers (C) Step 2 Insert bowl and wood grate A Insert bowl onto base B Insert wood grate into bowl Step 5 Completed Congratulations your assembly is n