Contact at the upperportion of the tip of the guide bar can cause the chain to dig into the object and stop the chain for an instant. The result is a lightning fast, reverse reaction which kicks the guide bar up and back toward the operator. If the saw chain is pinched along the top of the guide bar, the guide bar can be driven rapidly back toward the operator. Either of these reactions can cause loss of saw control which can result in serious injury. __ 2. UNDERSTANDING REACTTVE FORCES Pinch-k

2 2.14.02 rad/TR PRINTED IN U.S.A. SAFETY RULES A SAFE OPERATION PRACTICES FOR WALK-BEHiND POWERED ROTARY TILLERS TRAINING • Read the Owner's Manual carefully. Be thoroughly familiar with the controls and the proper use of the equipment. Know howto stopthe unitand disengagethe controls quickly. • Never allow children to operate the equipment. Never allow adults to operate the equipment without proper instruction. • Keep the area of operation clear of all persons, particularly small children, and

29 Allrepairs,adjustmentsandmaintenancenotdescribedintheOperator’sManualmustbeperformedbyqualifiedservicepersonnel. WARNING5152116172011131419212225263127185862424138353430363940372863646165754322423359575655545328915ClutchWasherKit60101263343 44454647484950 Ref. Part No. Description Ref. Part No. Description Ref. Part No. Description 1. 530071927 Kit- -- Trigger/Lockout 24. 530059677 Starter Hub- -- EPS 44. 530059999 Cover- -- Gearbox 2. 545011903 Cover- -- Handle 25. 530021180 Spring- -- EPS 4

1 inch = 25.4 mm IMPORTANT: Use only Original Equipment Manufacturer (O.E.M.) replacement parts. Failure to do so could be hazardous, damage your snow thrower and void your warranty. REPAIR PARTS SNOW THROWER - - MODEL NO. XT824ES (96192003302) HANDLES KEY PART NO. NO. DESCRIPTION 10 10 10 1 2 3 4 5 5 6 7 9 8 01.12.001-E 1 180480 IMPELLER ROD ASSEMBLY 2 405740 TRACTION ROD ASSEMBLY 3 180445 SHIFTER ROD TOP 4 187716 SHIFTER ROD BOTTOM 5 180447 SPRING SLEEVE 6 178669 IMPELLER SPRING 7 180926 TRACT

Tighten oil fill cap / dipstick securely each time you check the oil level. TO CHANGE ENGINE OIL Determine temperature range anticipated before next oil change. All oil must meet API service classification SG–SL. • Be sure snow thrower is on level surface. • Oil will drain more freely when warm. • Catch oil in a suitable container. NOTE: The left side wheel may be removed from snow thrower for easier access to the oil drain plug and place ment of a suitable container. The unit tilted, resting on

Veuillez ne pas retourner l’outil au detaillant. 1-800-554-6723 Instruction Manual Manual de Instrucciones Manuel d’Instructions 1420 1630 WARNING: Read and follow all Safety Rules and Operating Instructions before using this product. Failure to do so can result in serious injury. ADVERTENCIA: Lea el manual de instrucciones y siga todas las advertencias e instrucciones de seguridad. El no hacerlo puede resultar en lesiones graves. AVERTISSEMENT: Lire le manuel d’instructions et bien respecter to

inches. 1 inch = 25.4 mm IMPORTANT: Use only Original Equipment Manufacturer (O.E.M.) replacement parts. Failure to do so could be hazardous, damage your snow thrower and void your warranty. 21 22 REPAIR PARTS SNOW THROWER - MODEL PP10530ES (96192001802) CONTROL PANEL / DISCHARGE CHUTE 3 1 2 2 6 19 2 2 26 28 27 27 25 20 29 7 4 5 6 8 8 16 18 17 10 14 3 13 15 9 11 12 22 23 22 23 31 32 30 REPAIR PARTS SNOW THROWER - MODEL PP10530ES (96192001802) CONTROL PANEL / DISCHARGE CHUTE KEY PART NO. NO. DESC

IMPORTANT MANUAL DO NOT THROW AWAY 12.21.10 CL 532 43 99-79 Printed in the U.S.A. SAFETY RULES Safe Operation Practices for Walk-Behind Powered Ro ta ry Tillers TRAINING • Read the Owner’s Manual care ful ly. Be thor ough ly fa mil iar with the controls and the proper use of the equip ment. Know how to stop the unit and disengage the controls quickly. • Never allow children to operate the equipment. Never allow adults to op er ate the equipment without proper instruction. • Keep the area of oper

INSTALL SPEED CONTROL ROD (See Figs. 1 and 2) 1. Remove plastic tie securing rod to lower handle. 2. Insert rod into speed control bracket and secure with retainer spring. SPEED CON TROL ROD SPEED CONTROL BRACKET RETAINER SPRING SPEED CONTROL LEVER FIG. 2 SPEED CONTROL ROD HANDLE KNOB LOWER HANDLE PLASTIC TIE UPPER HANDLE FIG. 1 INSTALL TRACTION DRIVE CONTROL ROD (See Figs. 3 and 4) The traction drive control rod is installed on the snow thrower. 1. Remove plastic tie securing rod to lower handl

Please do not return unit to retailer. • 1-800-554-6723 Instruction Manual Manual de Instrucciones Manuel d'lnstructions BVM200VS ! IMPORTANT MANUAL -Do not throw away MANUAL IMPORTANTE -No Io descarte MANUEL IMPORTANT -A Conserver & WARNING: Read and follow alt Safety Rules and Operating Instructions before using this product. Failure to do so can resu_ in serious injury. ADVERTENOIA: Lea el manuat de instrucciones y siga todas tas advertencias e instrucciones de seguridad. Et no hacerlo puede