DURATION: From the date of purchase by the original purchaser as follows: One (1) Year. 2. WHO GIVES THIS WARRANTY (WARRANTOR): Campbell Hausfeld / Scott Fetzer Company, 100 Production Drive, Harrison, Ohio, 45030, Telephone: (800) 543-6400 3. WHO RECEIVES THIS WARRANTY (PURCHASER): The original purchaser (other than for purposes of resale) of the Campbell Hausfeld product. 4. WHAT PRODUCTS ARE COVERED BY THIS WARRANTY: Any nailer, stapler, air tool, spray gun, inflator or air accessory supplied

Si dichos instrumentos de seguridad son desconectados, la garantia quedaria cancelada. D. Los ajustes normales explicados en el(los) manual(es) suministrado(s) con el producto. E. Articulos o servicios normalmente requeridos para el mantenimiento del producto, tales como: anillos en O, resortes, amortiguadores, defensas, hojas de impulsor, fusibles, baterias, empaques, almohadillas o sellos, boquillas de fluido, agujas, boquillas para rociar arena, lubricantes, mangueras de material, elementos f

8) © Connecting the High Pressure Hose to the Pump (see pg. 9) Cómo conectar la manguera de alta presión a la bomba (ver pág. 9) ©Connecting the Garden Hose to the Pressure Washer (see pg. 9) Cómo conectar una manguera de jardín a la lavadora de presión (ver pág. 9) © Adding/Checking Engine Lubricant (see pg. 9) Abastecimiento y verificación de lubricante (ver pág. 9) 987000-455 1-27-09 (REV:00) If you have any questions, please call: 1-866-340-3912 Si tiene alguna pregunta le suplica

Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or property damage! Retain instructions for future reference. Gravity Feed Spray Gun Description Air operated spray guns are designed to perform a variety of painting, coating, and finishing applications using the power of compressed air. Safety Guidelines This man

TRIGGER ONLY MODE (WITH TRIGGER LOCK) The tool is a single-actuator device. This mode requires that, with the trigger lock not positioned in the safe mode, only a pull of the trigger will fire a fastener. After verifying there are no fasteners in the tool, safety check the operation of the activated trigger lock to prevent the tool from firing a fastener before storage. Always disconnect from compressed air when not in use. LOADING/UNLOADING THE TOOL 1. Set the pin length adjustment switch to th

To keep your pump running at maximum efficiency, GASBOY recommends a periodic inspection at least twice a year. . Remove Water from Tank. After every fill-up, check your tanks for water. Water can accumulate in both underground and aboveground storage tanks due to condensation or defective fill openings that are not properly protected with watertight covers. Remove any water with a sump pump to forestall serious damage to equipment. Water, sediment, and other foreign matter that accumulates in t

Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury, death and/or property damage! Retain instructions for future reference. Framing Nailer Note: This framing nailer is shipped with the BLACK single cycle mode trigger installed. Always know the operational mode of the nailer before using. Failure to know the operational mode could result in death or serious personal injury. Operational Modes This stick framing naile

Important! Please follow these instructions. This kit may be different from the one specified in instruction booklet. COMBINATION 8X8 and 10X8 FLOOR KIT This floor kit will build either the 10’ wide or 8’ wide x 7’ 8-5/8” deep floor size FOR MARCO SERIES, SOLAR SHED AND MWP IMPERIAL ONLY This floor kit is for 10’ x 7’ 8-5/8” and 8’ x 7’ 8-5/8” buildings. Please refer to the appropriate pages of this instruction manual to build the floor size needed. If constructing an 8X8 storage building, you w

©Connecting the water supply to the pressure washer (see page 10) Cómo conectar un suministro de agua a la lavadora de presión (ver página 10) ©Assemble Spray Wand (see page 11) Armado del tubo rociador (ver página 11) HU80215 pREssURE wAsHERs TOOLLEss AssEMBLY Guide (Note: Page references refer to the Operator’s Manual) guía de armado sin herramientas (nota: Todas las referencias a páginas se refieren al manual del operador) If you have any questions, please call: 1-866-340-3912 Si t