Оценок - 3, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
The channel injector designed to mount indoors or outdoors close or antenna feed. The system uses the existing in the house. The CatCam was designed to work with Cat 5 wiring. system will function with quad wire, Cat 5 delivers the picture. The Cat 5 allows the use of an automatic line length and picture compensator. Quad wire does not take advantage of this enhancement. Model Differences: The model 9500HHR series is a high headroom design for CATV and off air antenna feeds only. (5-806MHz) The model 9500BID series is a bi-directional design for use with CATV cable boxes that are interactive or require bi-directional communications with the cable company. (5-42MHz return path) The model 9510PAL is designed to modulate PAL frequencies and use CATV or off air antenna feeds. Installation: First, locate the incoming CATV or antenna feed and install the channel injector at that location. Second, install the camera at the desired location and run Cat 5 wire from the camera to the channel location. Third, apply power and select an unused channel for the CatCam picture to appear on all the televisions. WARRANTY Multiplex Technology, Inc. warrants this defects in materials and the date of purchase or or at its option, replace defective product. To obtain warranty service, material authorization (RMA) to Multiplex Technology, Inc., 3001 Enterprise Street, Brea, 92821, Attention: Customer Service. Please the outside of the carton. Any implied warranty arising from the sale implied warranties of merchantability and fitness to the warranty stated above. MTI shall not losses or damages or expenses, whether direct, incidental arising from the use of or the inability to use Some states do not allow limitations on how long the implied lasts or the exclusions or limitations or incidental or damages, so the above limitations and exclusions may apply to you. This warranty gives you specific legal rights, and may have other rights which may vary from state to state. Specifications: 5° C 9511 (B&W) 9511PAL(AUS) 9521 (Color) HHR/BID HHR/BID lens viewing angle resolution: horizontal 525 lines vertical 350 lines standard lens cover: minimum light level 2 lux video input format EIA 78° 525 lines 350 lines smoked 2 lux CCIR 525 lines 350 lines 8 lux NTSC input signal 1.0 V peak-to-peak @ 75. signal-to-noise ratio >45 dB white balance automatic electronic shutter speed automatic: 1/60 to 1/50,000 second tuning range UHF 14 to 64 CATV 65 to 125A 21 to 62(28 to 67) 14 to 64 65 to 125A power supply included with product mains power 105 to 125 210 to 250 105 to 125 output of power supply 15VDC 600mA general injector module camera module width x height x depth 6.5” x 3.5” x 1.25” 2.75” x 4.5” x 3” (16.3cm x 9cm x 3.2cm) (6.9 cm x 11.4cm x 7.6cm) shipping weight 2 lbs (0.9 kg) operating temperature –4°F to 131°F (–20°C to 55°C) A excluding channels 95 through 99 Installation: Locate the incoming or antenna (Usually found on the Remove the lock screw injector and slide the Use the...
Эта инструкция также подходит к моделям:Домашние кинотеатры - CAT CAM 9511PAL B&W (144.25 kb)
Домашние кинотеатры - CAT CAM 9521BID COLOR (144.25 kb)
Домашние кинотеатры - CAT CAM 9521HHR COLOR (144.25 kb)
Домашние кинотеатры - CAT CAM 9511HHR B&W (144.25 kb)