Cut out a patch large enough to overlap the damaged area by a minimum of 38 mm (1.5 in.) from all sides. Center the patch over the damaged area and with a pencil trace the outline of the patchApply masking tape around the perimeter of the outlined patch area to ensure a tight and clean glue line Using 100 grit sandpaper or a pumice stone, roughen the patch area on the boat as well as the backside of the patch. When sanding, you just need to rub off the protective outer surface of the fabric unti

Improper installation or servicing of the Mercury product could result in damage to the product or personal injury to those installing or operating the product. NOTE: After completing installation, place these instructions with the product for the owner's future use. Propeller Installation Some propeller installations may require the use of special OEM mounting hardware not included with this propeller. Use only hardware specified by the engine OEM. Special trim tab or anodic plate may need to b

3.Upon processing the warranty registration, Mercury Marine will send registration verification by mail to the purchaser of the product. If this registration verification is not received within 30 days, please contact your selling dealer immediatelyWarranty coverage is not effective until your product is registered with Mercury Marine Mercury Inflatable Boat Limited Warranty United States and Canada Outside United States and Canada . Check with your local distributorWHAT IS COVERED Mercury Marin

™ Strong, quiet and easy to transport, Mercury® FourStroke Portables are anything but lightweight when it comes to performance. Available in 2.5 to 25 horsepower, these FourStrokes incorporate the lessons we.ve learned in more than 65 years of perfecting outboard technology for the marine environment. In short, we took championship-winning power and performance and made it everything a four-stroke should be: Clean and Quiet Reliable Fuel-Efficient No Mixing of Gas and Oil Additionally, most manu

- Mercury founder E. Carl Kiekhaefer sold his first outboard engine in 1939, determined to raise engine standards throughout the marine world. Today when you experience the superior supercharged power of Verado®, the smooth control of Digital Throttle & Shift or the lightning-fast acceleration of Fury™ propellers, it’s easy to see why Mercury remains focused on the lofty goals of its originator. With 70 years of dedication, passion and innovative engineering invested in the advancement of marine

This would occur if the operator accidentally falls overboard or moves within the boat a sufficient distance from the operator's position. Falling overboard and accidental ejections are more likely to occur in certain types of boats such as low sided inflatables, bass boats, high performance boats, and light, sensitive handling fishing boats operated by a hand tiller. Falling overboard and accidental ejections are also likely to occur as a result of poor operating practices such as sitting on th

We firmly believe it will bring you many years of boating fun and excitement. This Owners Manual contains all the safety and operating information you need to get the most out of your Inflatable boat. It also contains information on how to provide care and maintenance to help protect your investment. Store this manual for future reference. The operator, passengers and craft are governed by local, national, and when applicable, international rules and regulations of the waterways. If you are not

If the gasoline being used contains alcohol, it is advisable to drain as much of the remaining gasoline as possible from the fuel tank, remote fuel line, and engine fuel system. IMPORTANT: This outboard is equipped with a closed fuel system when the engine is not running. With this closed system, fuel within the engine's fuel system, other than the fuel tank, will remain stable during normal storage periods without the addition of fuel treatment stabilizers. Fill the fuel tank and engine fuel

When deflating, maintain a balanced air pressure between air chambers to prevent stress or potential damage to the inside diaphragms that separate the air chambers bc 14778 c - Open position d - Valve cap 1.Unscrew the valve caps, turn a quarter turn counterclockwise. 2.Push in the valve stem and deflate the keel. Push in the valve stem and turn the stem a quarter turn clockwise to lock the valve in the open position. ad a - Valve stem b - Closed position 28 MAINTENANC( 3.Push in the valve stem

If damage is present or suspected, the outboard should be taken to an authorized dealer for a thorough inspection and necessary repair The boat should also be checked for any hull fractures, transom fractures, or water leaksOperating a damaged outboard could cause additional damage to other parts of the outboard, or could affect control of the boat. If continued running is necessary, do so at greatly reduced speeds ! WARNING Avoid serious injury or death from loss of boat control. Continued boat