18 • Water-resistant • Built-in powerful I/R illuminator (good for over 200 m) • Automatic brightness protection • Camera/video adaptable • Precision internal windage/elevation adjustments • Standard weaver mount or optional weaver rail or side rail mounts • Long eye relief • Low power consumption. Standard and commonly available 2AA batteries ensure nonstop operation of the device for no less than 50 hours. • Compact size and light weight • Shockproof plastic case CONTENTS 1. Brief description
• NEVER direct laser beam at the eyes of people or animals • NEVER aim the unit at the Sun or bright sources of light • NEVER subject the unit to impacts • NEVER transport the unit without its case • NEVER disassemble the unit. This may be hazardous for you due to high voltage currents in the system • ALWAYS keep the unit out of children’s reach • ALWAYS store the unit in a dry place • Caution - use of controls or adjustments, or performance of procedures other than those specified herein may re
LAM belongs to Class I laser products in accordance with IEC 60825-1. Here are some common precautions that must be observed. • ALWAYS turn the device off when it is not in use and when you change the battery! • NEVER look into the beam • NEVER subject LAM to excessive impacts • NEVER transport LAM without the case • NEVER disassemble LAM • NEVER reverse polarity of the battery • ALWAYS make sure that the device is fixed firmly on the weapon • ALWAYS remove battery when not in use for a long per
SPECIFICATION .......................................................1 3. Spotter 15-45x60 ......................................................2 4. OPERATION INSTRUCTIONS..............................3 Set Up and Mounting......................................................3 5. STARTING OBSERVATION .................................3 6. CARE FOR YOUR SPOTTING SCOPE.................4 7. WARRANTY...........................................................4 8. CUSTOMER SUPPORT.....................
5. OPERATION INSTRUCTIONS.............................. 6. STARTING OBSERVATION ................................. 7. CARE FOR YOUR SPOTTING SCOPE................. 8. WARRANTY........................................................... 9. CUSTOMER SUPPORT.......................................... 10. QUALITY CERTIFICATE.................................... 1. INTRODUCTION Congratulations on your purchase of a Spotter NC 2060x80 spotting scope. The Spotter is an amazing scope designed for hunting, s
The device should be located in the position which allows comfortable observation without stretching forward; • Place inserts (4, 5) in the apertures of the rail (2). The insert (4) is placed with a pimple looking downwards in the nearest front slot of the rifle rail. If there is no such a slot, it’s recommended to make it at a gunsmith workshop.. It is recommended to place the inserts at the maximum possible distance from each other; • Place clamps (6) and clamp screws (7) in the inserts (4, 5)
• Do not apply superfluous efforts at work with lens assembly, agile elements and thread connections. • Due to considerable optical magnification of the eye-piece some small structures inside the tube coating in the form of dark and/or white points may be seen in the field of view which does not affect the serviceability of the • The resolving power (resolution) may change in the direction from the center towards the perimeter of the field of view. This is an inherent feature of the image tube t
To operate it properly, please read this manual carefully. Ignoring operation procedures described in this manual will void your warranty. . NEVER disassemble the unit. . NEVER reverse the polarity of a battery. . NEVER connect the unit to external power sources. . ALWAYS remove battery when the unit not in use for a long period. . ALWAYS keep the objective lenses covered when not in use. . ALWAYS store the unit in a warm dry place. 3 Precautions NC 3-12x50 is the sophisticated precise optical i