17 2. EXPLODED VIEW, PCB ASSEMBLIES AND PARTS LIST ................. 19 CAUTION A Parts marked with this sign are safety critical components. They must always be replaced with identical components. Refer to the Fostex Parts List and ensure exact replacement, NOTES * Adjustment procedures are given in this manual which also includes a Parts List and schematic diagrams to assist the service technician in maintaining the Model EN3020 Please feel free to contact the nearest Fostex Dealer and D

/>/ } :yy/ *K4>m \ «»*** 5 ?W89? masn^ixm • • I o o o I postex TABLE OF CONTENTS 1. LOCATION OF CONTROLS (Front panel) ................... 2 2. LOCATION OF CONNECTIONS (Rear panel) ................. 3 3. INTRODUCTION ......................................... 4 4. INSTALLATION ......................................... 5 5. APPLICATION NOTES ................................... 9 6. BLOCK DIAGRAM ....................................... 10 7. SPECIFICATIONS ........................

DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Tne iighinng flash with arrownead symbol, within an equilateral triangle, is intended to alori the user to the presence of uninsulated "dangerous voltage" within me product's enclosure lhat may be of sufficient magnitude to constitute a risk ot electric shock to persons The exclamation pont withm an eauiiatera: triangle is intended to alert the user to the oresonce ot important op

If the Vari-pitch function was on, the unit will use the pitch data previously set. The Vari-pitch function will be automatically turned off in the following situations: * When you turn on the power to the unit (The pitch data will be reset to 0.0%.) * When you set Slave mode ON. (The pitch data remembers the previous setting.) * When you set up the digital input tracks and “DIGITAL” appears on the display. (The pitch data remembers the previous setting.) If you have installed an optional

Therefore, to execute the multitrack recording using the D2424LVmkII, you have to separately prepare a current drive. For a current drive, you can use any universal "E-IDE" hard disk drive* which has been tested and approved by FOSTEX. A hard disk drive can be installed in the removable case attached. The updated information on the operation-confirmed HD and backup media for D2424LVmkII is mentioned in the following Fostex inter

OUT) The output jacks of the post fader (post equalizer) signals of each channel. These can be used for sends to the effect unit. 39. AUX OUT JACKS (AUX OUT 1, 2, 3, 4) Output jacks of the AUX buss 1 ~ 4. Used for sending the mixed signal of the AUX 1 ~ 4 send (8) to the digital reverb. 6 40. GROUP OUT JACKS (GROUP OUT 1, 2, 3, 4) Output jacks of the GROUP buss 1 ~ 4 which are normally used for sends to the multltrack recorder. 41. GROUP IN JACKS (GROUP IN 1, 2, 3, 4) Input jacks of the

A separate document (Order No. 8288010101) is available for the revised section of the manual. * The Service Manual for A-8LR starts from page 71 . 8 TRACK RECORDER/REPRODUCER Service Manual UK and AUS versions FCA and CND versions EUR versions DM versions 0700464 ^ 0201667 ^ 0601195 ^ 1000632 ^ Fostex TABLE OF CONTENTS 1. INTRODUCTION ................................................ 3 2. SPECIFICATIONS................................................ 4 3. THE CONTROLS AND THIER FUNCT

DO NOT EXPOSE THIS APPLIANCE TO RAN OR MOISTURE.'' SAFETY INSTRUCTIONS Read Instructions - All the safety and operating inductions should be read before ihe appliance is operated. Retain instructions - The safety and operating instructions should be retained Icr future reference. Heed Warnings —All warnings on tlx; applianceand in the operating instructions should be adhered 10. Follow Instructions - All operating and use instructions should be followed. Water and Moisture - The appliance s

[INPUT SEL] Key * Set whether to send the A to H input signals [INPUT] or track 9-16 play [TRACK] sounds to the faders of channel faders 9 to 16. 26. [REC ASSIGN-BUSS-SOURCE] Key * Select the channel (SOURCE) to send to the REC BUSS during “BUSS” recording. Select the SOURCE channel with the [CH STATUS/CH SEL] key. * This key lights ON when the SOURCE is selected. 27. [REC ASSIGN-BUSS-REC TRK] Key * The track (READY) to record in “BUSS” recording is selectable when this key is flashing. Set READ

.Fostex L Features ♦200mm (8 in) double cone type full range ♦ 8 ohm impedance ♦ fo to 20kHz frequency response ♦ 96.5dB sensitivity at 1W/1m (3.3ft) ♦ 3.8kg (8.38 lb) net weight FE Sigma-series FE208X Specifications & Thiele/Small Parameters Frequency Response / Impedance Impedance 8 ohm Minimum Frequency Response : 45Hz Reproduction Frequency Response fo - 20kHz S.P.L. 96.5dB/W (m) Rated Input 34W Music Power 100W Equivalent Diaghram Radius 81mm (3.19 in) Equivalent M