Оценок - 2, средний балл: 5
(
)
)
|
Фрагмент инструкции
Check all input and output connections for s e c u re fit. Isolate and re p l a c e the damaged cable. Pro g ram volume canOt be adjusted with master vo l u m e c o n t ro l . No powe r. Amplifier or outboard gear connected to the re c o rd output. I m p roperly connected AC cord or power line source not on. B l own fuse. Connect amplifier or outboard gear to master output. Properly connect AC cord to AC power source. Turn powe r o n . Re m ove the fuse cover with a flat-bladed scre wd r i ve r. Replace fuse with a new 500mA fuse. The amplifier is turned up, Faulty output connections but there is no signal. Improper level adjustment. No signal in headphones. Improper connection. Improper level or cue mix settings. Properly connect amplifier, or outboard gear to mixer. Properly set crossfader, channel faders, gain controls, and input selector toggles. Check headphone connection to mixer. Tighten if necessary. Adjust headphone level and cue mix to the proper level and channel settings. D E S C R I P T I ON O F F U N C TI O N S D E S C R I P T I ON O F F U N C TI O N S 1. Power switch: Selects power "ON" or "OFF". 2. BNC jack: 12V gooseneck light input 3. Mono/stereo switch: switches the of Master output between a stereo and mono signal 4. Master balance control: Controls left/right signal balance of the master output. 5. Master level control: Controls the overall signal output level of the master output. 6. Cue stereo/split switch: In "stereo" position, the pre-selected signal of switches (17) and controls (9) and (11) will be monitored as a stereo signal in the headphones. In "split" position, the pre-selected signal of switches ( 17) and controls ( 9) and ( 11) will be monitored on one side of the headphones, and the master output signal on the other side. 7. Booth level control: Controls the signal level of the booth output. 8. Headphone level control: Controls the overall headphone output level. It is recommended headphones with an impedance rating of 200 ohms or less be used for maximum volume. 9. Headphone output: Connection for 1/4 inch headphone. Recommended headphone impedance is 32-200 ohms for maximum volume. 10. Cue pan assign: When this switch is"UP," the cue pan fader affects the headphone output. While "DOWN," the cue pan fader affects the booth output. 11. Cue pan: Fades the headphone output between the channel(s) selected by the cue assign switches (17) and the master one output, effectively allowing the user to preview a mix. 12. Send/return: Send and Return levels are used to control the volume of the external effects unit used in the effects loop. 13. Crossfader source selectors: When set to A, the selecte channel will be assigned to the left side of the crossfader. when set to B, the selected channel will be assigned to the right side of the crossfader. When set to BYPASS, the crossfder will be bypassed alltoghter. 14. Crossfader: Fades the master output between the channels selected by the Crossfader source selectors (13). 15. Beat indicators: Illuminate according to the beat of the program music. The replacement of illumination varies depending on the style of music selected. This features offers a helpful visual indicator of beat alignment. 16. Channel fader: Controls the input channel level. 17. Cue assign switch: Selects the channel to be monitored. 18. Fader Start: Turns the fader start function ON or OFF. The fader start will work with CD players (such as StantonOs S-Series) to start the audio from the CD playerOs cue point. 19. Talkover attenuation control: Sets the amount of attenuation applied to the music output signal when switch (20) is applied and the mic is spoken into. The attenuation is adjustable from zero to 26 decibels. 20. Mic selector: Turns the mic on or off and activates the automatic talkover circuit. When activated, the automatic talkover circuit reduces the music output based on the setting of the talkover attenuation control (19). 21. FX switch: Turns effect send signal ON or OFF for each channel 22. Equalizer: Individual controls for low frequency, midrange, and high frequency equalization with (+10/-10 dB) Note: Any changes made to EQ settings will change the overall output level. 23. Microphone volume: Controls the output levels of mics 1 and 2 24. Input channel controls: Controls the input sensitivity of each channel and Hi, Mid, and Low frequency equalization (+9/-26dB) of each channel. 25. Microphone 1 input: Combo XLR / 1/4O connector 26. Input selector switches: Selects phono or line input. 27. Auxilliary selectors: A. Enables monitoring of the effects loop through the headphones. B. Turns ON/OFF the efftects loop in the master output. 28. Output Level meter: Displays the overall signal level of the master output. 29. Input Level meter: Displays the input level. The input level is determined by the input TE C H N I C A L S P E C I FI C AT I O N S TE C H N I C A L S P E C I FI C AT I O N S channel controls (24). 30. Audio signal inputs: Line inputs are u...