Assembly is not needed on these models. See Saw Chain Tension Adjustment. 1. Lay chain out flat. 2. Loosen and remove guide bar nuts and sprocket cover. 3. Loosen and remove drive sprocket screw or remove E-ring from shaft (see Figure 4). Remove sprocket support. 4. Install guide bar onto saw body. Assemble center slot of guide bar onto guide bar bolts. 5. To replace sprocket support, repeat step 3 in reverse order. Firmly tighten drive sprocket screw with #2 Phillips screwdriver (if applicable)

Allow chain to cool down. Readjust chain tension. FILLING OIL TANK 1. Remove oil cap. 2. Fill oil tank with SAE #30 motor oil. Note: For temperatures below 30°F, use SAE #10 oil. For temperatures above 75°F, use SAE #40 oil. 3. Replace oil cap at once. Tighten oil cap firmly for good seal. This will avoid oil seepage from tank. 4. Wipe off excess oil. Note: It is normal for oil to seep when saw is not in use. Empty oil tank after each use to prevent seepage. OPERATING CHAIN SAW WARNING: Read and

Keep this manual for future reference. ® ENGLISHtELEScopING ELEctrIc cHaINSaw/poLESaw MoDELS rpS2N1: 104317, pS1510a ® ENGLISHtELEScopING ELEctrIc cHaINSaw/poLESaw MoDELS rpS2N1: 104317, pS1510a StopparaarrEt Do Not rEtUrN proDUct to StorE. caLL 1-800-626-2237 For tEcHNIcaL aSSIStaNcE For more information, visit This manual is your guide to safe and proper operation of the saw. SavE tHESE INStrUctIoNS. Keep your purchase receipt for warranty coverage. No DEvUELva EL proDUcto a La tIENDapara mas

Improper use of saw can cause severe injury. Keepthis manual for future reference. ENGLISH ESPANOL STOPPARA DO NOT RETURN PRODUCT TO STORE. CALL 1-800-626-2237 FOR TECHNICAL ASSISTANCE For more information, visit This manual is your guide to safe and proper operation of the saw. SAVE THESE INSTRUCTIONS. Keep your purchase receipt for warranty coverage. NO DEVUELVA EL PRODUCTO A LA TIENDA Para mas informacion, PARA AYUDA TECNICA LLAME AL 1-800-626-2237 Este manual es su guia para utilizar esta si

Improper use of this chain saw can cause severe injuryordeathfromfire,electricalshock, body contact with moving chain, or falling wood. BEForE opEratING Saw 1. Read and understand this owner’s manual before operating saw. 2. Watch what you are doing. Use common sense. Do not operate saw when you are tired. 3. Use saw for cutting wood only. • Do not use chain saw for purpose not intended. • Do not use for cutting non-wood items. 4. Only well-instructed adults should operate saw. Never allow child

Make sure saw is running at full speed before starting a cut. Switch Lockout Button Trigger Connect extension cord to power cord and power supply. Use built-in cord hitch or knot method (inset) to secure together. See Extension Cords for correct size. Power Cord Cord Hitch Extension Cord Slot Pour motor oil (see Filling Oil Tank, page 10, for correct oil type) in oil tank (do not use standard bar and chain oil). DO NOT leave oil in tank when not in use. Oil Bottle Oil Squeeze Bulb For complete i

Improper use of tiller can cause severe injury. Keep this manual for future reference. STOPSTOP PARAPARA ARREARRETTSTOPSTOP PARAPARA ARREARRETT DO NOT RETURN PRODUCT TO STORE. CALL 1-800-626-2237 FOR TECHNICAL ASSISTANCE For more information, visit This manual is your guide to safe and proper operation of the tiller. SAVE THESE INSTRUCTIONS. Keep your purchase receipt for warranty coverage. NO DEVUELVA EL PRODUCTO A LA TIENDA Para mas informacion, PARA AYUDA TECNICA LLAME AL 1-800-626-2237 Este

2. Checkallitemsforanyshippingdamage.Ifyoufind any damage or if any parts are missing, promptly inform dealer where you bought chain saw. CHAIN SAW NAMES AND TERMS Bucking Process of cutting a felled tree or log into lengths. Felling Process of cutting down a tree. Felling Cut Final cut when felling a tree. Make this cut on opposite side of tree from notching cut. Front Handle Located at front of saw body. Front Hand Guard Shield between front handle and guide bar. Protects left hand while using

For additional information see owner’s manual or call 1-800-858-8501. Make sure chain moves freely around guide bar then tighten nut. LOOSEN Loosen nut... If chain becomes loose around guide bar, allow chain to cool then... TIGHTEN Turn chain tensioning screw clockwise to tension saw chain... TIGHTEN WARNING: Unplug saw and allow chain to cool before tensioning. New saw chains will stretch. Check chain tension frequently when first used and tighten when chain becomes loose around guide bar. Pull

Remove oil cap. 2. Fill oil tank with SAE #30 motor oil. Note: For temperatures below 30°F, use SAE #10 oil. For temperatures above 75°F, use SAE #40 oil. DO NOT use standard bar and chain oil. 3. Replace oil cap at once. Tighten oil cap firmly for good seal. This will avoid oil seepage from cap. 4. Wipe off excess oil. Note: It is normal for oil to seep when saw is not in use. It is necessary to empty oil tank after each use to prevent seepage. OILING CHAIN Manual Oil System Always check oil le