However, information is subject to change. Your Responsibility for Your System’s Security Toll fraud is the unauthorized use of your telecommunications system by an unauthorized party, for example, persons other than your company’s employees, agents, subcontractors, or persons working on your company’s behalf. Note that there may be a risk of toll fraud associated with your telecommunications system and, if toll fraud occurs, it can result in substantial additional charges for your telecommunica
WARNING: FAILURE TO USE MANUFAC- TURE PROVIDED PARTS, VARIATIONS IN TECHNIQUES AND CONSTRUCTION MA- TERIALS OR PRACTICES OTHER THAN THOSE DESCRIBED IN THIS MANUAL MAY CREATE A FIRE HAZARD AND VOID THE LIMITED WARRANTY. Chimney and Termination NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE. Figure 1 TYPICAL INSTALLATION PRECAUTIONS Note:These fireplace systems are not difficult to install. However, in the interest of safety, it is recommended that the installer be a qualified or certified“tradesman”
Security Alert: Your Responsibility For Your System's Security Toll fraud is the unauthorized use of your telecommunications system by an unauthorized party, for example, persons other than your company's employees, agents, subcontractors, or persons working on your company's behalf. Note that there may be a risk of toll fraud associated with your telecommunications system, and if toll fraud occurs, it can result in substantial additional charges for your telecommunications services. You and you
Please read and understand these instructions before beginning your installation. Do not alter or modify the fireplace or its components under any circumstances. Any modification or alteration of the fireplace system, including but not limited to the fireplace, chimney components and accessories, may void the warranty, listings and approvals of this system and could result in an unsafe and potentially dangerous installation. IMPORTANT! TO ASSURE PROPER ALIGNMENT OF GLASS DOORS: INSTALL THIS FIRE
Press 1 from the Activity Menu. You can skip the prompt by pressing 1 again. 2. Record at the tone. OPTIONAL •Press 1 to stop recording or pause. Editing Your Message •Press one of the following: -1 to continue recording. -2 3 to play back. See additional Playback Options on page 17 or 34. -* D or * 3 to delete (and begin again) 3. Press # to approve message. Addressing Your Message 4. Do one of the following: Tips -Enter recipient’s address and press #. Press * A or * 2 to switch between number
E 04/2007 SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE MODEL: MPE-33R This manual will enable you to obtain a safe, efficient and dependable installation and operation of your electric fireplace. Please read and understand these instructions before beginning your installation. Do not alter or modify this fireplace or its components under any circumstances. Any modification or alteration of the fireplace system, including but not limited to the fireplace and accessories, may void the warranty, li
Ensure each subsequent chimney section is securely attached by testing as noted in Step 4. Step 6. Select the proper Security Chimneys roof flashing based on pitch of roof. Use chart below for selection: Roof Pitch Model Flat to 6/12 F10F6 6/12 to 12/12 F10F12 Next, slide roof flashing over extended chimney section that previously has been installed above the roof opening in Step 4. FTF10 flashings require flashing spacers. Slide flashing all the way down until the flashing base rests flat on th
Each submenu choice is explained in greater detail in subsequent sections of this booklet. To select and set your personal mailbox options, you will press Activity Menu, and select from these submenus: 1. Mailing list submenu 1 To create a list 2 To scan an existing list 3 To modify a list 2. Personal directory submenu 1 To create a directory 2 To review a directory 3. Fax option submenu 1 Select a default print number Y or N Turn autoprint on or off 9 Select autodelete Y or N Turn autodelete on
In the spaces provided, write the feature access codes for your system. For more information about any of these features, see your system manager or refer to the DEFINITY® Generic 1 and Generic 3 and System 75 8434DX Voice Terminal User’s Guide, 555-230-856. USING THE SOFTKEYS You can display any of the softkey features by pressing Menu and then the softkey below the feature abbreviation. If the feature you want to use is not on the bottom line of the screen, press Next or Prev until you see the
In the spaces provided, write the feature access codes for your system. For more information about any of these features, see your system manager or refer to the DEFINITY® Enterprise Server (ECS), Release 5 8410 Voice Terminal User’s Guide, 555-230-763. USING THE SOFTKEYS If your 8410 has a display, you may be able to access up to 12 features with the softkeys. You can activate available softkey features by pressing Menu and then the softkey below the feature abbreviation. If the feature you wan