SETTING MPAA MOVIE RATING 1. Press the V-GUIDE key on the remote control to display menu. 2. Press the + key to switch V-Guide ON. 3. Press the + key again. Then use the / keys to highlight rating. 4. Press the MENU key to Block (B) or Unblock (U) selected rating. ( Arrow indicates selection.) 5. Press the – key to return to the V-Guide Options menu. QuickTips Use the CHANNEL / keys and the VOLUME – /+ keys to navigate through the menus and to make selections from the menus. ¦ V-Guide feature i

Disposal of these materials may be regulated due to environmental considerations. For disposal or recycling Information, please contact your local authorities or the Electronic Industries Alliance: FCC STATEMENT FCC Notice LCD TV: A CLASS B digital device This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment

.... .... .... .... HHHH CCCCoooolllloooorrrr EEEEnnnnhhhhaaaannnncccceeeerrrr Normal .WWWW aaaa rrrr mmmm Cool QuickTips Always follow on-screen instructions. The menu will display on the screen for approximately 20 seconds. Press MENU again to redisplay. All TV adjustments are controlled through the menu. Use the CHANNEL CH / CH and VOLUME VOL / VOL keys to navigate through the menus and to make selections from the menus. Under weak stereo signal conditions, you may receive better quality

(Refer to Figure 1) 2. Pull out the terminal by holding the handle. 3. Replace the terminal. Insert the terminal along Guide to fit Plug into Socket. (Refer to Figure 2) 4. Tighten the screws to secure the terminal. ♦ These figures show the case of replacing with HDB 15-PIN terminal. Figure 1 Screws Figure 2

RESETTING THE ANTENNA/CABLE MODE AND CHANNEL SEARCH Resetting the Antenna/Cable Mode or CH. (Channel) Search is required only if additional channels become available, such as moving to another city or having a cable service installed. 1. Choose Start from the Ch. Search menu options. ADDING OR DELETING CHANNELS 1. Press MENU key. 2. Use the / keys to highlight CH. Scan Memory. 3. Press the key to highlight the channel number entry area. 4. Enter the channel number you want to add or delete (exam

RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND BACK). NO USER-SERVICEABLE PARTS INSIDE EXCEPT LAMP REPLACEMENT. REFER MAINTENANCE INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THIS SERVICING TO QUALIFIED SERVICE PERSONNEL. UNIT. WARNING:TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. IMPORTANT SAFETY INSTRUCTIONS 1. Read these instr

LNS-M01 LNS-S01 LENS REPLACEMENT AND INSTALLATION PROCEDURE NOTES ON LENS INSTALLATION Lens installation should be performed by the qualified service personnel. It should be followed by this procedure precisely. Before attempt to install the lens, confirm the model number (both the LCD projector and the lens) and use the proper lens. If you have any questions, contact to the dealers. PARTS LIST Following parts are contained in the packing. • LENS 1 piece • LENS MOUNTING SCREWS 6 screw