Оценок - 2, средний балл: 5
(
)
)
|
Фрагмент инструкции
Never touch ashes or coals to see if they are hot. 27. Do NOT leave a lit outdoor fireplace unattended, especially around children and pets. 28. Do NOT attempt to move or store this outdoor fireplace until all ashes and coals are completely extinguished. 29. Do NOT remove ashes or coals until they are completely and fully extinguished. 30. Use heat-resistant gloves or hot pads when contacting handles. 31. Use long, sturdy fireplace tools when adding or moving logs. 32. Do NOT place wood directly into bottom of the outdoor fireplace. Place wood only on the wood grid. 33. Do NOT overload the fireplace. Do not add additional firewood until the fire burns down. NOTICE: If any portion of the bowl, lid or spark guards of this outdoor fireplace are glowing red it is overloaded. 34. Do NOT lean over this outdoor fireplace when lighting or when in use. 35. Do NOT place a hot spark guard or hot fireplace tools onto combustible surfaces such as grass, wooden deck or furniture. 36. Avoid breathing smoke from the fire and avoid getting it into your eyes. 37. This outdoor fireplace should be thoroughly inspected and cleaned on a regular basis. 38. After a period of storage and/or non-use, check for signs of damage and creosote build-up. Do NOT operate until necessary repairs and/or cleanup are executed. 39. Do NOT use pressure washer to clean. 40. Use only Blue Rhino Global Sourcing, LLC factory authorized parts. The use of any part that is NOT factory authorized can be dangerous and will void your warranty. 41. Deaths, serious injury or damage to property may occur if the above is not followed exactly. page no Contact 1.800.762.1142 for assistance. Do not return to place of purchase. Assembly Instructions DO NOT RETURN PRODUCT TO STORE. For assistance call 1.800.762.1142 toll free Please have your owner’s manual and serial number available for reference . For Easiest Assembly: • To avoid losing any small components or hardware, assemble your product on a hard level surface that does not have cracks or openings • Clear an area large enough to layout all components and hardware • When applicable, tighten all hardware connections by hand first Once the step is completed, go back and fully tighten all hardware . • Follow all steps in order to properly assemble your product Step 1 Assemble stand Attach legs to top and bottom stand rings using 8 sets of cap nuts (C) and lock washers (D) Step 2 Attach accents strips A Attach accents strips to bottom stand rings by inserting key openings on accents strips onto bottom stand rings and slide down B Secure accents strips onto top stand ring using 12 screws (A) Insert bottom bowl Insert bottom bowl into stand Step 4 Assemble spark guard Attach spark guard handle to spark guard using nut (B) Step 5 Insert wood rack and spark guard Insert wood rack and spark guard onto bottom bowl Step 6 Completed Congratulations your assembly is now complete Read Operating Instructions before proceeding Step 3 Outdoor Fireplace Model No. WAD517A Operating Instructions WARNING FOR YOUR SAFETY Before using this outdoor fireplace, make sure you have read, understand and are following all information provided in the Important Safeguards presented on page 2. Failure to follow those instructions can cause death, serious injury or property damage. Lighting 1 Make sure there is only a small amount of ash in the bottom of the bowl 2 Place a layer of dry kindling or a natural firestarter such as Fatwood™ onto the center of the grate 3 Place above that a layer of dry seasoned hardwood that is cut to lengths no more than 3/4 the diameter of the bowl 4 Use a match to light kindling or firestarter 5 Replace spark arrestor once the kindling or firestarter is lit Tending the Fire You may need to shift and/or add logs for an ideal experience Reminders: • Always wear protective gloves or a pot holder when tending a fire • Wait until glowing coals have developed before adding any additional wood • Do NOT add gasoline, kerosene, diesel fuel, lighter fluid or alcohol to relight or enhance an existing fire 1 Carefully remove spark arrestor 2 While using a long handled fireplace tool, shift coals and logs to allow additional airflow 3 If additional wood is required, place wood on top coals Be careful not to shift ashes 4 Replace spark arrestor Extinguishing 1 Allow fire to burn itself out 2 Do NOT use water to extinguish as this is dangerous and can cause damage to this outdoor fireplace Cleaning & Care Inspecting This outdoor fireplace should be inspected on a regular basis to ensure product safety and longer product life Do NOT attempt to inspect this outdoor fireplace until the fire is COMPLETELY out. 1 Check handles to make sure they are secure 2 Check components for any signs of damage or rust 3 If damage to any component is detected, do NOT operate until repairs are executed Cleaning This outdoor fireplace should be cleaned on a regular basis to promote safer experiences and longer product life Note: After repeated u...