• Do not install this headset near a microwave oven or on the same electrical outlet. You may experience decreased performance while the microwave oven is operating. • If your headset is plugged in with a modem or a surge protector, plug the headset (or modem/surge protector) into a different location. If this doesn't solve the problem, re-locate your headset or modem farther apart from one another, or use a different surge protector. Troubleshooting • Relocate your headset base to a higher loca

Or write to: AT&T Customer Information Center P.O. Box 19901 Indianapolis, IN 46219 Order: Document Number 999-500-246 i INTRODUCTION TO THE AT&T PagePac® 6 VOICE PAGING SYSTEM AT&T PagePac 6 is a compact, powerful, voice-paging system that integrates single-zone paging capability into your telephone system. PagPac 6 can be used with most AT&T telephone systems, from single-line residential systems to modern electronic key and PBX systems. Front Rear PagePac® 6 Voice Paging System FEATURES Conne

Para recibir este manual en espanol, llame al 1 800 222-3111. AT&T and the globe symbol are registered trademarks of AT&T Corp. licensed to Advanced American Telephones. © 2000 Advanced American Telephones. All rights reserved. Printed in Mexico. 850003559 Issue 1AT&T 6/00 CONTENTS INSTALLATION ..............................................................................................2 Display Dimmer Switch Brightness ...........................................................................

.NOTE: To dial a memory number refer to page 16. 2 1 91-5393-20-00_ATT1440_R0 2003.3.7 10:47 AM Page 22 CALLER ID OPERATION About Call History If you subscribe to Caller ID service with your local phone service provider, this phone stores all incoming calls (up to 99 at the handset) with valid Caller ID information in the call log. Name, number, time and date information can all be stored, if they are sent with the call. Calls are automatically stored in the order they are received,with call “1”

KEEP SMALL OBJECTS SUCH AS BATTERIES OR SCREWS OUT OF THE REACH OF CHILDREN. Swallowing them may result in serious injury. If swallowed, consult a physician immediately. DO NOT DISASSEMBLE OR ALTER. Doing so may result in an accident, fire or electric shock. USE THIS PRODUCT FOR MOBILE 12V APPLICATIONS. Use for other than its designed application may result in fire, electric shock or other injury. DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE Doing so may result in fire of electric shock. DO NO

You may give the other person a brief message, such as announcing a call, or you may ask them to pick up and talk to you. Every phone in your MERLIN system has a unique intercom code number. The code numbers are different on the three models: Model 206 Codes 0 through 5 Model 410 Codes 10 through 19 Model 820 Codes 10 through 29 To make the call, touch an INTERCOM button, pick up the handset, and dial the intercom code number. When you hear a beep, give your message or ask the other person to pi

Then place the headset back into the headset base. Try the registration process again. Maintenance and Troubleshooting 37 Troubleshooting If you have difficulty with your headset, please try the suggestions below. For Customer Service, visit our website at or call 1 (800) 222–3111. In Canada, dial 1 (866) 288-4268. • Make sure the power cord is securely plugged in. • Make sure the battery connector is securely plugged into the cordless headset. • Make sure the telephone line cord is securely and

To pair and connect a cellular phone: 1. Using the telephone base, ..........press the MENU softkey while in idle mode. 2. ..........Press the UP and DOWN Navkeys.............. to highlight Bluetooth, then press the SELECT softkey to enter the Bluetooth menu. 3. Press the SELECT softkey to enter the Set up Cellular menu. • If a device is already connected to the telephone base, press the OK softkey to temporarily disconnect the device(s) and continue the pairing process. 4. Press the NEXT softke

Press OFF to hang up. To preview numbers before dialing, then press PHONE to dial. Press V at any time to make corrections as you are entering numbers. Speed dialing & directory dialing To use speed dialing, press and hold a dial pad button (1-9) to display the number stored in that speed-dial location, then press PHONE to dial the number. To use directory dialing, press DIR, scroll or search to find the number you want, then press PHONE to dial the number. (See pages 15-19 to enter, edit or sea

For optimal performance, charge the headset battery for at least six hours before use. When not in use, recharge the headset by returning it to the headset base. 1. Press on both sides of the battery compartment cover and lift the cover up and off. 2. Insert the battery into the battery compartment. 3. Push the battery plug into the connector inside the compartment and ..............................place the wires neatly inside the compartment. 4. Insert the tab on the bottom of the battery cove