A Starter Kit . User Guide 6409A–ATARM–30-Jun-08 6409A–ATARM–30-Jun-08 Section 1 Overview ....................................................................................................................1-1 1.1 Scope................................................................................................................................. 1-1 1.2 Deliverables ...................................................................................................................... 1-1 1.3 The

The kit allows designers to design, synthesize, simulate and program Atmel’s new FPSLIC product. A comprehensive tutorial takes designers through the complete FPSLIC development process. The starter kit, which runs on PC Windows®-based platforms, includes everything needed to get started with FPSLIC, including all software, tutorials, complete documentation, boards, parts and cables. The kit consists of a starter kit board that includes: AT94K40AL Device AT17LV010 Device AT17 Series ISP Port

USB MICROCONTROLLERS 8-bit Microcontrollers with Integrated USB Controller Ready to Go in No Time . .. USB MICROCONTROLLERS 8-bit Microcontrollers with Integrated USB Controller Ready to Go in No Time Atmel®’s family of 8-bit microcontrollers supports a wide range of USB applications: high-end keyboards, mice, phone accessories, toys, serial adapters and industrial equipment. An on-chip bootloader permits very quick firmware download from a PC, without using a parallel programmer or dedicated ha

The system stack of Eureka-147-based digital radio (which includes DAB, DAB+, and T-DMB) provides the flexibility to implement a wide variety of services while providing a platform for the development of future services. Atmel has over 30 year’s experience designing digital radio solutions and offers a complete DAB solution including an RF front end and a DAB decoding baseband. The ATR2740 DAB baseband processor is a highly functional system-on-chip solution. Its flexibility enables the implemen

Atmel makes no representations or warranties with respect to the accuracy or completeness of the contents of this document and reserves the right to make changes to specifications and products descriptions at any time without notice. Atmel does not make any commitment to update the information contained herein. Unless specifically provided otherwise, Atmel products are not suitable for, and shall not be used in, automotive applications. Atmel’s products are not intended, authorized, or warranted

1-1 Section 2 Functional Description .......................................................................... 1-3 2.1 Features....................................................................................................1-4 2.2 Description of the Environment.................................................................1-5 Section 3 Communication Protocol....................................................................... 1-8 3.1 Communication Protocol...............................

1-1 1.1 Features....................................................................................................1-1 Section 2 Hardware Description ........................................................................... 2-3 2.1 Block Diagram...........................................................................................2-3 2.2 Power Supply............................................................................................2-3 2.3 RESET ...................................

A MOSFET turns the backlight LEDs on/off and a 4.7ohm resistor limits the maximum current through the LEDs. This makes it quite easy to control the backlight with a PWM signal to adjust intensity. 8297A-AVR-04/10 The SPI interface The Display Xplained module uses a simple SPI interface to communicate with the LCD module. This consist of a Chip-Select (CS) line, a clock line (SCL), and two data lines (SDI/SDO). The SPI is operated in mode 3, i.e. inactive clock is ‘high’, and data is latched on r

1.2 Connection • Connect the front panel to the main board. Instructions • Connect the main board to a FATAR TP10 (or TP23) keyboard. • Connect the main board to pedal (see Table 1-1 for pinout). • Connect the main board audio outputs to line level inputs of a mixer, a stereo sound system, etc. • Connect the main board to 12V/1A DC power supply (- to tip, + to ring). Table 1-1. Pedal Inputs (J15) Pinout Pin No. Function Description 1 Pedal Ground Reference Ground for pedal inputs 2 Forte (Sustai

Description The ATA5283 is a 125 kHz ultra-low power receiver used for the wake-up function of Tire Pressure Monitoring (TPM) application. The sensitive input stage of the IC amplifies and demodulates the carrier signal from the antenna coil to a digital output signal for a microcontroller. During the standby mode the preamble detection unit monitors the incoming signal and activates the wake-up output and the data output, if the IC receives a proper 125 kHz carrier signal. By combining the IC w