KEEP ASH DRAWER EMPTY! 6. Installation Instructions 6.1 Unpacking and Inspectionof Parts Inspect the unit for visible damage. Stove parts and accessories are packaged inside the stove. It is recommended that the owner remove these parts prior to proceeding with the installationto avoid parts damage. NOTE: The doors, grates, and firebrickcan be easily removed to lighten theweight prior to moving and placing the stove. 6.2 Warnings All stoves must be installed in accordance with state and local bu

4 2"(51mm) 36"(914mm) 14" (355mm) with side shields 20" (508mm) without side shields 14" (355mm) 20" (508mm) MinimumSizefloorprotection(USA)is33"DeepBy25" Wide. * Floor protection dimensions for the front and sides are measured from the appliance door opening in The United States. In Canada, the side dimension is measured from the widest part of the appliance. jj K l uSa canada note: Measurement "L" is measured from the pedestal base in the US ONLY note: Measurement "K" is measured from the glas

Failure to follow instructions may result in property damage, bodily injury, or even death. FOR USE IN THE U.S. AND CANADA. SUITABLE FOR INSTALLATION IN MOBILE HOMES. IF THIS HARMAN STOVE IS NOT PROPERLY INSTALLED, A HOUSE FIRE MAY RESULT. FOR YOUR SAFETY, FOLLOW INSTALLATION DIRECTIONS. CONTACT LOCAL BUILDING OR FIRE OFFICIALS ABOUT RESTRICTIONS AND INSTALLATION INSPECTION REQUIREMENTS IN YOUR AREA. Contact your local authority (such as municipal building department, fire department, fire preve

FAilure tO FOllOw inStructiOnS MAY reSult in PrOPertY dAMAge, bOdilY injurY, Or even deAth. FOr uSe in the u.S. And cAnAdA. SuitAble FOr inStAllAtiOn in MObile hOMeS. iF thiS hArMAn StOve iS nOt PrOPerlY inStAlled, A hOuSe Fire MAY reSult. FOr YOur SAFetY, FOllOw inStAllAtiOn directiOnS. dO nOt uSe MAkeShiFt cOMPrOMiSeS. cOntAct lOcAl building Or Fire OFFiciAlS AbOut reStrictiOnS And inStAllAtiOn inSPectiOn reQuireMentS in YOur AreA. cOntAct YOur lOcAl AuthOritY (Such AS MuniciPAl building dePAr

FOr uSE IN ThE u.S. ANd CANAdA. NOT SuITAblE FOr INSTAllATION IN mObIlE hOmES IF ThIS hArmAN STOvE IS NOT PrOPErlY INSTAllEd, A hOuSE FIrE mAY rESulT. FOr YOur SAFETY, FOllOw INSTAllATION dIrECTIONS. CONTACT lOCAl buIldINg Or FIrE OFFICIAlS AbOuT rESTrICTIONS ANd INSTAllATION INSPECTION rEQuIrEmENTS IN YOur ArEA. CONTACT YOur lOCAl AuThOrITY (SuCh AS muNICIPAl buIldINg dEPArTmENT, FIrE dEPArTmENT, FIrE PrEvENTION burEAu, ETC.) TO dETErmINE ThE NEEd FOr A PErmIT. CETTE guIdE d’uTIlISATION EST dIS

700 Lbs. 900 Lbs. 800 Lbs. Plenum Dimensions 20 X 20 20 X 20 20 X 25 20 X 25 Clearance to Combustibles- Rear 30 in. 30 in. 30 in. 30 in. Clearance to combustibles- Side 24 in. 24 in. 24 in. 24 in. Dimensions: A: 25 in. 26 in. 28 in. 28 in. B: 20 in. 20 in. 20 in. 20 in. C: 46.5 in. 47.5 in. 57 in. 52.5 in. D: 27.75 in. 31 in. 31 in. 36 in. E: 20 in. 20 in. 25 in. 25 in. F: 40 in. 41.75 in. 40.5 in. 45 in. G: 16.5 in. 16.5 in. 16.5 in. 16.5 in. H: 44.5 in. 47.5 in. 48 in. 52.5 in. K: 27.5 in. 27.

Next, position the blower in the filter box, centered behind the inlet hole and allow approximately 1/8 in. space between the rear of the furnace and the blower outlet. Now, install the filter rail onto the filter box. NOTE: The filter rail is best installed on the side toward the shaker handle, so that any pipes from the hot water coil do not interfere with filter installation or removal. NOTE: Before proceeding with the installation of the access door, it is suggested that the wiring be comple

FOR USE IN THE U.S. AND CANADA. IF THIS HARMAN STOVE IS NOT PROPERLY INSTALLED, A HOUSEFIRE MAY RESULT. FOR YOUR SAFETY, FOLLOW INSTALLATION DIRECTIONS. CONTACT LOCAL BUILDING OR FIRE OFFICIALS ABOUT RESTRICTIONSAND INSTALLATION INSPECTION REQUIREMENTS IN YOUR AREA. CONTACT YOUR LOCAL AUTHORITY (SUCH AS MUNICIPAL BUILDING DEPARTMENT, FIRE DEPARTMENT, FIRE PREVENTION BUREAU, ETC.) TO DETERMINE THE NEED FOR A PERMIT. CETTE GUIDE D'UTILISATION EST DISPONIBLE EN FRANCAIS. CHEZ VOTRE CONCESSIONNAIRE

APPROVED FOR USE IN THE U.S. AND CANADA IF THIS HARMAN STOVE IS NOT INSTALLED CORRECTLY, A HOUSE FIRE MAY RESULT. FOR YOUR SAFETY, FOLLOW INSTALLATION DIRECTIONS PRECISELY. CONTACT LOCAL BUILDING OR FIRE OFFICIALS ABOUT RESTRICTIONS AND INSPECTION REQUIREMENTS FOR YOUR AREA. CONTACT YOUR LOCALAUTHORITY (SUCH AS THE MUNICIPAL BUILDING DEPARTMENT, FIRE DEPARTMENT, FIRE PREVENTION BUREAU, ETC.) TO DETERMINE THE NEED FOR A PERMIT. CETTE GUIDE D’UTILISATION EST DISPONIBLE EN FRANCAIS. CHEZ VOTRE CONC

If outside air is installed, the inlet cover may be blocked. 3. The air chamber under the burnpot may be filled with fines and small bits of ash. 4. The holes in the burnpot may be getting filled with ash or carbon buildup. 5. Combustion blower fan blades may need cleaned. 6. There is no fuel in the hopper. SMOKE SMELL Seal the vent pipe joints and connection to stove with silicone. FIRE HAS GONE OUT 1. No pellets in hopper. 2. Draft setting is too low. 3. Something is restricting fuel flow. 4.