It will accept BEA’s 4 .” Square Pushplate, 4 .” Square Pushplate, 4 .” Panther Pushplate, Dual Vestibule Pushplate and 4 .” Round Pushplate. The post is made of durable carbon steel and the mounting bracket is made of stainless steel for strength. It can be mounted on either existing concrete or newly poured concrete. CAP MOUNTING SCREWS (3) POST MOUNTING SCREWS (4) PLASTIC CAP TRANSMITTER MOUNTING TRAY (HIDDEN) NOT USED WITH PANTHER APPLICATION PUSHPLATE MOUNTING BOX (HIDDEN) PUSHPLATE (NOT IN

FOR FURTHER ASSISTANCE DURING EASTERN STANDARD TIME AT 1-800-523-2462 FROM 8AM - 5PM. FOR AFTER-HOURS, CALL EAST COAST: 1-866-836-1863 OR 1-800-407-4545 / MID-WEST: 1-888-308-8843 / WEST COAST: 1-888-419-2564. DO NOT LEAVE ANY PROBLEM UNRESOLVED. IF YOU MUST WAIT FOR THE FOLLOWING WORKDAY TO CALL B.E.A., LEAVE THE DOOR INOPERABLE UNTIL SATISFACTORY REPAIRS CAN BE MADE. NEVER SACRIFICE THE SAFE OPERATION OF THE AUTOMATIC DOOR OR GATE FOR AN INCOMPLETE SOLUTION.WEB: WWW.BEASENSORS.COM E3EA PNIWM

These boxes are made of durable ABS plastic and are made to securely mount a pushplate and a variety of optional transmitters to activate an automatic door. Many of the boxes have an optional weather ring to give even more weather protection to the switch. They are also designed to attractively recess the pushplate in the housing to and to minimize vandalism from prying up the pushplate. PRODUCT DESCRIPTION COMPONENT ID PUSHPLATE SIZE PUSHPLATE SERIES SURFACE MOUNT BOX FLUSH MOUNT BOX WEATHE

It is made of durable 304 stainless steel to match BEA’s 6” round pushplate. It can be surface-mounted directly to a wall, or attached to a single-gang, double-gang or 4X4 electrical box. 1. Fasten Escutcheon to wall surface. 2. Route wiring to pushplate switch through the appropriate hole (F). 3. Attach pushplate to Escutcheon. KEY QTY SCREW TYPE USE A 4 #12 X 1 7/16” Plastic Anchor Wall B 4 6-32 X 1/2” Machine Screw Single-Gang C Double-Gang D 4 8-32 X 3/4” Machine Screw 4 X 4 Box E * 6-32 X 1

Remove the battery cover on the chime. 2. Remove the white Styrofoam block 3. Unplug the red and black wires inside the battery compartment. 4. Remove the battery pack and discard appropriately. StyrofoamBlock House Code Door Try-Me Wires Chime components Required Tools: Small flat blade screwdriver, drill, 1/16” and 5/32” drill bits, and phillips screwdriver. Included Hardware: (2) Plastic screw anchors (2) 4x20mm screws (2) 3x20mm screws (2) Double sided adhesive pads The wireless door chime K

All repairs and/or component replacements must be performed by BEA, Inc. Unauthorized disassembly or repair: 1. May jeopardize personal safety and may expose one to the risk of electrical shock. 2. May adversely affect the safe and reliable performance of the product will result in a voided product warranty. 75.5116.03 EN 20080505 Page 1 of 2 3 Receiver Setup ANALOG RECEIVERS (300 MHz) 1. Manually set access codes using the dipswitches on receiver. A. Use a pencil or similar object to set the co

^ Input 1 and Input 2 are activation inputs for Door 3 and Door 4 respectively Input 3 is the door position switch for Input 1 (Door 3).Input 4 is the door position switch for input 2 (Door 4) if used. \Switch is closed when door is closed. MC-LINX2 # 2 0® POWER OUTPUT OPTION SETUf» □ □ 12 to 24 VAC/VDC +/- 10% , (SEE NOTE #1) DOOR 1 DOOR 2 DOOR 3 DOOR 4 V DPS DPS DPS DPS POWER OUTPUT OPTION SETU£ □ □ Output A directly to Activation Circuit of Door Control #1. Output B directly to .A

2 Technical Specifications DESCRIPTION SPECIFICATION Frequency: 12 to 24 V AC: ± 10%: 12 to 24 V DC: -10% / +30%: 24.125 GHz Supply voltage: Mounting height: Normal: 7’; Maximum: 10’-0” Tilt angle: 0° to 90° vertical -15° to +15° lateral Detection area: Wide 13ft (W) x 6.5ft (D) Narrow 6.5ft (W) x 8.2ft (D) (supplied as optional) Minimum detection speed: 2 in/sec. (measured in axis) Power consumption: < 2 W Standard output relay: Max contact voltage 60 VDC / 125 VAC Max contact current 1 A (resi

These boxes are made of durable ABS plastic and are made to securely mount a pushplate and a variety of optional transmitters to activate an automatic door. Many of the boxes have an optional weather ring to give even more weather protection to the switch. They are also designed to attractively recess the pushplate in the housing to and to minimize vandalism from prying up the pushplate. PRODUCT DESCRIPTION COMPONENT ID PUSHPLATE SIZE PUSHPLATE SERIES SURFACE MOUNT BOX FLUSH MOUNT BOX WEATHE