7. Remove and rinse hose in clean, running water. let dry completely. 8. empty dirty and clean water tanks and rinse following instructions on page 13. 3A. 3B. 3B. 4. 5. 10 800.237.7691 Operations Operations Cleaning with Oxy Gen2 tool Select models only 1. follow instruction on page 10 to attach hose to machine. 2. To pretreat heavy traffic areas: A. Pour oxy gen2 formula into the oxy gen2 tool and attach tool to your machine’s hose. B. hold tool 2-4 inches above the floor and press red trigger

Turn Power Switch OFF. 2. Unplug Power Cord from outlet. 3. Remove and empty Collection Tank. a. Release Collection Tank latches [1 each side] by pulling up from bottom of latch and then out. b. Carefully lift Collection Tank from Lower Body. c. Carry Collection Tank to a toilet or sink. To empty, pour out contents using opening at back of Tank. d. Rinse Collection Tank thoroughly. e. Remove lint and hair from Red Gasket in base of unit. (Do not remove gasket) 4. Clean Nozzle Window by lifting l

Locate and organize all parts before assembly. Familiarize yourself with the parts and where they go. Following this User’s Guide will greatly enhance your ability to get the most performance from your BISSELL QuickSteamer for many years. Your QuickSteamer comes in three, easy to assemble components: Handle assembly Upper Handle assembly Clean/Solution Tank 3 Screws The only thing you will need to assemble your cleaner is a Phillips head screwdriver. Assembling Your QuickSteamer 1. Slide Upper B

Everything we know about floor care went into the design and construction of this complete, high-tech home cleaning system. Your Big Green is well made, and we back it with a limited two-year warranty. We also stand behind it with a knowledgeable, dedicated Consumer Services department, so, should you ever have a problem, you’ll receive fast, considerate assistance. My great-grandfather invented the floor sweeper in 1876. Today, BISSELL is a global leader in the design, manufacture, and service

Tank may not be seated properly Pick up both the Water Tank and Formula Tank and reseat them so they fit snugly on the unit. Solution or Water Tank is Empty Check fluid levels in Heavy Duty Bladder and Formula Tank. 2-in-1 Tank has picked up maximum Empty 2-in-1 Tank and Refill with dirty water Clean Hot Tap water into the Heavy Duty Bladder. Thank you for selecting a BISSELL product. If you should happen to need assistance during assembly or operations, call 1-800-237-7691. Please do not return

Unwrap vacuum flex hose completely from around unit. 1A 1B 3. Attach the tough stain brush tool to the spray trigger unit by pressing tool onto spray trigger firmly until the button lock snaps into hole. Make certain the tool is securely attached. 4. Twist the Quick Release cord wrap clockwise to unwrap the power cord completely from onboard cord storage and plug into 120 Volt grounded outlet, as described in Important 1C 1D Safety Instructions, page 3. The heat indicator light will take 30 seco

*Do not boil or microwave water as it can destroy the bladder. 1. 2. 43. 7 800.237.7691 ug120-4073_1623_908.indd 7 10/14/08 12:59:37 PM Operation Fill the 2-in-1 water tank (continued) 5. Replace the top of the tank by matching the lid and tank edges. Handle must be in the forward position in order to replace lid. Rotate the handle to the carrying position to latch the lid. Note: Remember to secure the lid and test to make sure it is secure before picking up the tank. 6. Place tank into machine

Brushes (select models) Cleaning fluid Keep plenty of genuine BISSELL Fiber Cleansing Formula™ on hand so you can clean and protect whenever it fits your schedule. Always use genuine BISSELL deep cleaning formulas. Non-BISSELL cleaning solutions may harm the machine and will void the warranty. Dirtlifter® PowerBrush Belt Access Door Removable Nozzle Strain Reliever Handle™ Handle Assembly Lower Body Assembly Upper Body Assembly Edge Sweep™ Easy Carry Handle 48 oz. BISSELL 48 oz. BISSELL 48 oz. B

4. Repeat motion over same area without depressing Trigger. 5. Repeat Steps 3 and 4 until no more dirt can be removed. 6. Continue to clean entire carpet, working in 3’ x 4’ sections. 7. Empty the Dirty Water Tank Assembly when dirty water reaches the fill line. 8. If the machine loses suction and/or motor noise rises in pitch, turn Power Switch to OFF. Check the Dirty Water Tank Assembly and empty the tank if it is full [see WHEN YOU’RE DONE, page 6]. 9. If floor nozzle stops spraying, turn Pow

If that is needed, please follow the instructions below. 1. turn off the machine, and unplug it from the outlet. Remove portable spot cleaner. 2. Remove the nozzle by unscrewing three WARNING: to reduce the risk of fire, electric shock or injury, unplug from the outletbefore servicing. screws on the nozzle cover. 3. turn the machine on its side. ImPORTANT: with portable spot cleaning pedal facing down. 4. Remove end cap by unscrewing the 3 screws. take care not to drop the screws into the unit.