(CB A citizens band and Class C remote control frequencies.) FCC regulations permit only “(one party to another) than “broadcasts” (to a wide audience). Thus, advertising is not allowed on CB Channels because that is “broadcasting. ” NOTICE: Replacement or substitution of transistors, regular diodes or other parts of a unique nature, with parts other than those recommended by Cobra, may cause violation of the technical regulations of Part 95 of the FCC Rules, or violation of Type Acceptance requ

1997 480-113-P-001 How T o Use ou r Citizens Band 2-Way Mobile Radio Model 29 LTD ST Contents Page The CB Story ............................................................................................ 1 SoundTracker System ............................................................................ 1 Specifications ........................................................................................ 2,3 Installation Location.................................................................

Cobra™ offers hammer tackers in three (3) models: 6000 Heavy Duty Hammer Tacker, 6100 T-Head Hammer Tacker, and 6200 Jumbo Hammer Tacker. With proper use and care the Cobra™ professional hammer tacker will give you many years of reliable performance. For safe operation and best performance, please read all safety rules and instructions carefully before using the Cobra™ professional hammer tacker. Be sure to send in your registration card. 1 IMPORTANT SAFETY INSTRUCTIONS WARNING: NEVER POINT HAMM

The Citizens Band Story The Citizens Band lies between the shortwave broadcast and 10-meter amateur radio bands, and was established by law in 1949. The Class D two-way communications service was opened in 1959. (CB also includes a Class A citizens band and Class C remote control frequencies.) Customer Assistance Customer Assistance Should you encounter any problems with this product, or not understand its many features, please refer to this owner’s manual. If you require further assistance afte

The electrical noise may come several sources. Many possibilities exist and variations between vehicles require different solutions to reduce the noise. Consult your COBRA dealer or a 2-way radio technician for help in locating and correcting the source of severe noise. Base Station Operation (Operation from 120VAC, House Current) To operate your transceiver from your home or office, using the regular house current as the power source, you will require a 12 VDC power pack that has been specially

. . . . . . . . . . . . . . . .. . . . .. . . . .. . . . .. . . A1 Licensing/Warning/Included Accessories . . . . . . . A1 Controls and Indicators. . . . . . . . . . . .. . . . .. . . . .. . . A2 Our Thanks to You . . . . . . . . . . . .. . . . .. . . . .. . . . .. . . A3 Customer Support . . . . . . . . . . . . . . . . . . . . . . . . . . . A3 Operating Your CB Mobile Radio Installation/Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Turning On. . . . . . . . . . . . . . . .

Strengthens Signals Going Out” COBRA ELECTRONICS CORPORATION 6500 W. Cortland Street Chicago, Illinois 60707 Printed in Thailand Cobra Electronics Corp.© 1997 Part no. 480-230-P-001 “Ingenious Products for Easier Communication. ” INTRODUCTION How to use your 75 WX ST CITIZENS BAND RADIO WITH SOUNDTRACKER CONTENTS: Introduction .......................................... 3 Features ............................................ 3 Technical Support and service .......... 3 Controls and Indicators ...

This unit features advanced Phase Lock Loop (PLL) circuitry providing complete coverage of all 40 CB channels. Channel Channel CB Freq. CB Freq. Channel In MHz Channel In MHz 1 26.965 21 27.215 2 26.975 22 27.225 3 26.985 23 27.255 Limited Two Year Warranty 25 NW ST Specifications COBRA ELECTRONICS CORPORATION warrants that its COBRA CB Radios,and the component parts thereof,will be free of defects in wor kmanship and materials for period of two (2) years from the date of first consumer purchase

Take care not to damage the sealing gasket. With the two parts of the radio separated, for servicing, it will be necessary to link the two pcbs using the flexi-pcb ME110016, which is part of the Service Kit. LOCATION OF ADJUSTMENT POINTS TP1 RF PCB L203C208 TCXO Figure 4-14 – Adjustment Points 4.5.3 PLL Alignment Before any alignment is carried out to the transmitter, or receiver, it is necessary to align the Phase Locked Loop (PLL). The PLL consists of the Rx VCO, Tx VCO and TCXO. If the PLL is

2. Press the Channel Up or Channel Down Scanning Channels button to begin scanning channels. The radio ignores specific privacy codes while scanning channels. Channel Buttons The Scan icon will continue to be displayed when scan is on. Your radio will continue to scan all channels and stop if an incoming transmission is detected. Your radio will remain on that channel for 10 seconds. While setting channel scan, if you do not press any buttons for 15 seconds, your radio will automatically return